Repair/replacement of internal wiring and allied works of OTM Accn at YOL CANTT under AGE E/M of GE (KH) YOL

Amount

PART-I:- Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including light fiitings any type, switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, tube light fitting, regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed.

Point wiring with 1.50 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduit medium grade, ISI marked of suitable size with all fittings/ accessories such as bends, cross, elbow, tees etc. of suitable size and also including PVC insulated ISI marked unsheathed 1.50 Sqmm copper multistranded conductor FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed MS pressed steel (modular sunken box) of suitable sizes terminal boxes made from 1.60mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. and modular cover plate as top cover (ISI marked) for one light point or one fan/exhaust fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed. Note:- (i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. (ii) Point wiring is considered for modular switches and sockets. Rate of metallic sunken box and other connected accessories required for modular point wiring included in quoted rates. (iii) Rate of modular switch and sockets will be paid seperately under relevant item.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.

All as per serial item No '03' above, but for 3 pin 15 amps socket out let on independent with 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed.

All as per serial item No '03' above, but for one light point controlled by two way switchs.

M & L for point wiring with 1.50 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including PVC junction box /MS pressed steel cadmium plated terminal box not less than 1.60 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated hylam sheet top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.50 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/ fan point controlled by one switch Note : (i) Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. (ii) Chase cutting if required shall be measured and paid separately under relevant items in this schedule.

All as per serial item No '08' above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.

All as per serial item No '08' above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.

All as per serial item No '08' above, but for 3 pin 15 amps socket out let on independent with 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed.

All as per serial item No '08' above, but for one light point controlled by two way switchs.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Supply and fix modular switch piano flush type one way 6 Amps, 1 module, 230V, Fixed, complete all as specified and directed.

Supply and fix modular switch piano flush type one way 16 Amps, 1 module, 230V, Fixed, complete all as specified and directed.

Supply and fix modular switch piano flush type two way 6 Amps, 1 module, 230V, Fixed, complete all as specified and directed.

S&F Modular socket 6 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.

S&F Modular socket 6/16 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.

Supply and fix modular bell switch 6 Amps, 1 module Fixed, complete all as specified and directed.

S&F Modular fan regulator step type 100 Watt one module 230 volts, complete all as specified and directed.

Ceiling rose, surface type 3 terminals 65x20mm, fixed in repair, complete all as specified and directed.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in repair, complete all as specified and directed.

Supply and fixed in repair LED Bulb 9 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.

Supply and fixed in repair LED invertar Bulb 12 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.

Supply and fix in repairing LED Adore 2.8 W having base suitable for B22/ E27/ E14 holder CDL Candle Lamp, WW/ CDL, 6500/3000 K, 230 volts complete all as required at site and directed by Engr - in - Charge. Make:Havells / Polycab/Bajaj /CG

Supply and fix in repair modular Bell Push with indicator 6 Amps, 1 module including all As per existing make complete all as specified and directed by Engr-in- Charge.

Supply and fix in repair modular step type fan regulator, 2 Module including all As per existing make complete all as specified and directed by Engr-in- Charge.

Supply and fix modular cover plate with frame, 1 module including all As per existing make complete all as specified and as directed by Engr-in- Charge

Supply and fix modular cover plate with frame, 3 module including all As per existing make complete all as specified and as directed by Engr-in- Charge

Supply and fix modular cover plate with frame, 8 module including all As per existing make complete all as specified and as directed by Engr-in- Charge

Supply and fix modular cover plate with frame, 10 module including all As per existing make complete all as specified and as directed by Engr-in- Charge

Supply and fix modular cover plate with frame, 12 module including all As per existing make complete all as specified and as directed by Engr-in- Charge

Single pole and neutral sheet metal enclosure with a two pin and earth plug top and socket complete with one double pole MCB 20 Amps, fixed in repair, complete all as specified and directed.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed.

Supply and fix distribution board iron clad TPN DB double door with IP-43 protection 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface, complete all as specified and directed.

M & L for vertical DB iron clad factory made TPN 4 Way, MCCB as incomer and MCB SP as out going, double door DB IP 43 protection level, incl Blanking plate, lugs etc complete and neutral link with one MCCB 4 pole 415V 100 Amps rating with rupture capacity 16KA incl connection, fixing flushed to wall, necessary grouting, making good with CM 1:4 and painted to match exisitng wall color, complete all as specified and directed. (outgoing MCB will be measured seperately)

MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB SPN 32 Amp, 240 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB SPN 63 Amp, 240 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB TPN 63 Amp, 415 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

S & F MCB, 4 Pole, 63 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole, complete all as specified and directed. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

S & F MCB, 4 Pole, 100 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole, complete all as specified and directed. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed. Note:- (i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed. Note:- (i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed. Note :-(i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 10 watt LED, 230V, and making connection with 2 core copper twisted flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light, complete all as specified and directed.

Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper twisted flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light, complete all as specified and directed.

LED tube light fitting integral type 1x20W, 230V, LED tube light fitting invertar light (cool day light, normal white and warm white in one fitting) 4 hours backup with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, incluing taking out old light fitting any type, complete all as specified and directed.

S&F in LED high bay/flood type 1x150W, 240V, LED high bay light fitting inverter light (cool day light) with extruded polycarbonate, environment friendly, surround new industrial light, IP66 protection energy efficient 110 LPW ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all fittings including dismantling of unserviceable old light any type, complete all as specified and directed. Make:- Havells/Crompton/Philips.

Supply and fixing of bldg security light 30 Watt New generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source and lens enbedded PC cover having TOP opening seperate toughtned glass/verminproof driver compartment, SPDs with IP66 protection and impact resistance of IK07, suitable for pole dia 43mm (max) connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32mm dia lenght 1.20m along with clamps, including taking down old light, complete all as specified and as directed.

Supply and fixing decorative wall light fixture made up of polycarbonate, with 9W LED invertar lamp B22 base with 4 hours backup complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking out old light, complete all as specified and directed.

Supply and fix in repair modular switch piano flush type one way 6 Amps, 1 module, 230V, complete all as specified and directed.

Supply and fix in repair modular switch piano flush type one way 16 Amps, 1 module, 230V, complete all as specified and directed.

Supply and fix in repair modular socket out 6/16 Amps, 5 pin, 2 module, 230V, complete all as specified and directed.

Supply and fix in repair modular Bell switch 6 Amps, 1 module, 230V, complete all as specified and directed.

Supply and fix in repair modular socket out 6 Amps, 3 pin, 2 module, 230V, complete all as specified and directed.

Supply and fix in repair modular step type fan regulator, 1 Module, 100 Watt, 230V, complete all as specified and directed.

Material and labour for PVC Casing & Caping of size (20 x 12) mm ISI Marked suitable for electrical wiring, complete all as specified and directed.

Material and labour for PVC Casing & Caping of size (26 x 16) mm ISI Marked suitable for electrical wiring, complete all as specified and directed.

Material and labour for uPVC electrical conduit pipe of size 20mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc, complete all as specified and directed.

Material and labour for uPVC electrical conduit pipe of size 25mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc, complete all as specified and directed.

Material and labour for electrical round sheet PVC material used for covering junction boxes, fan mounting and other electrical opening on wall, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB Protected socket (modular AC box) 3 Module with MCB SP of capacity 25 Amp and power socket for geyser, complete all as specified and directed by Engr - in - Charge.

M & L for rendering 15mm thick in cement mortar 1:6 on internal fair faces of brick walls or on concrete surfaces, finished even and smooth with using using extra cement, complete all as specified and as directed.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty preparatory to distempering including preparation of surface, complete all as specified and as directed by Engr-in-Charge

Preparation of newly plastered wall surfaces and appling two coats of cement base paint over a coat of white wash, complete all as specified and as directed by Engr-in-Charge

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.50m below ground level, connecting to galvanised iron wire 4.00mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE :- Item of earthing includes the cost of 7.5 m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work.

Eshaan Construction Co. (BID ID -3169288)