Supply, Installation, Testing and Commissioning of 4 and 6 Mtr Octagonal Poles LED Street Lights and Nesessary Items At VARIOUS LOCATION IN UMARGAM NAGARPALIKA UMARGAM

Total Amount Rs.

NAME OF WORK :- ESTIMATE FOR Supply, Installation, Testing & Commissioning of 4 and 6 Mtr Octagonal

Polis’s LED Street Light’s & Necessary Item’s At VARIOUS LOCATION IN UMARGAM NAGARPALIKA

Sr. Qty. Description Total Unit Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min 8922.00 Ea

1 281.00 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be

erected on suitable foundation (included).(D) 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm base

plate, 4-M20 Bolts and 600mm long J-Bolt.

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

1 66.00 wind speed with integral Junction box consist of terminal plate of min 6051.00 Ea

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected on suitable foundation (included).(D) 4 Mtr. Long 70 mm

Top X 130 mm bottom dia, 3 mm thickness with

220mmX220mmX12mm base plate, 4-M16 Bolts and 450mm long J-

2 347.00 Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 122 Ea

KA to be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

Providing street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms.length and suitable

3 347.00 for 76.5 mm / 80mm. / require size pole top having sufficient 556 Ea

fasteners for fixing the brackets and having spread of 1 mtr.

length with suitable rise as per site condition & suitable welded

stiffener reducer and nipple with check nut complete painted with

one coat of Red oxide / PU base primer and two coats of

Aluminum / PU paint. paint with following nos of arms. [A] Single

Arm bracket 1 Mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI armored cable

4 12145.00 multistring Aluminum conductor for 1.1 KV. to be laid on wall 167 MTR

with necessary clamps or in existing trench / pipe of following

size of cables (c) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armored cable

5 1400.00 multistring Aluminum conductor for 1.1 KV. to be laid on wall 218 MTR

with necessary clamps or in existing trench / pipe of following

size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

6 Solder less crimping type Aluminum lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

7 2231.00 Supplying and erecting Flexible PVC insulated multistring

multicore 1.1 kv grade ISI marked copper wires of following size 58 Ea

to be erected as directed..

e) 1.50sq.mm 3 core round PVC sheathed

Providing & erecting 240 V MCB double pole switch for lighting

8 112.00 Load (B Curve) having 10 KA breaking capacity & confirms to IS : 322 Ea

8828 in existing box having following capacity

9 280.00 Providing and erecting HOT deep Galvanized iron strip wire 77 KG

10 347.00 Pipe type earthling having 150 cms.long and 2.5 cms. dia.

galvanized iron pipe with coupling and bunch buried in specially 365 Ea

prepared earth pit complete with necessary 8 SWG earth wire.

11 347.00 For using salt and charcoal / coke as required for pipe type 170 Ea

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

12 11175.00 depth for laying of cable. below ground / road surface for 62 MTR

enclosing cable and back filling the same to make ground as per

Excavating hard Murrum or Metal road by chiseling for

13 7797.60 preparing pit for poles or earth plates or for laying pipes & 238 CUM

clearing the site by removing debris & making site good.

"Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

14 347.00 free High pressure die cast aluminum housing with smooth finish 6116 Ea.

powder coated and heat sink extruded aluminum with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed. 120 to 300 Power Factor more than 0.95, THD <

%, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %. CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ Bridge Lux

(U.S.A.) make LED used for luminaire. (fittings required LM-79

& LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The Engineer in

charge may select any wattage capacity between the ranges

shown.)" (d) above 90 to 120 watts CAT III

Providing and Refitting 80mm thick Interlocking type colored

cement concrete M-300 paver block (Gray cement based rubble

15 6096.00 molded Laker finished) of approved shape and design for footpath 285.54 SQRMT

with 50mm average thick fine sand filing. but excluding cost of

concrete block Them includes levelling by using vibrating

compaction machine compulsory. Item includes all materials,

Labour, equipment’s, etc. complete including frost flung cement

vata/ filling/gap by cement mortar 1:3 the cost of fine sand as

directed by the engineer-in-charge. (Old Paver Block)

Providing and Refitting 80mm thick Interlocking type colored

cement concrete M-300 paver block (Gray cement based rubble

15 1704.00 molded Laker finished) of approved shape and design for footpath 286.38 SQRMT

with 50mm average thick fine sand filing. but excluding cost of

concrete block Them includes levelling by using vibrating

compaction machine compulsory. Item includes all materials,

Labour, equipment’s, etc. complete including frost flung cement

vata/ filling/gap by cement mortar 1:3 the cost of fine sand as

directed by the engineer-in-charge. (Old Paver Block)

Supply & erecting rubber coating with material one coat primer &

16 443.00 two coat rubber coating including loading &unloading as per 4500.00 NOS

direction of the engineer in charge(Old POLE)

10% additional machineries charges

Add 2% contingencies