REPAIRS AND REPLACEMENTS TO CERTAIN JOINERIES ROOF SHEET FALSE CEILING TILING SANITARY WORKS INCL WATER SUPPLY PLINTH PROTECTIONS CHAJJAS AND PLASTERINGS ETC IN OFFRS MESS JCOS MES OR COOH HOUSE AND DINNING HALL AT INF LINE JAMNAGAR

Amount

Dismantling plain or corrugated sheeting, any gauge, thickness all as specified.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F Pre- painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type hook with coach screws and washers in roof, walls etc.

M&L preparation of newly zinc or galvanised surfaces of any description over 10cm in width or girth not otherwise described by coating with moderate solution to receive painting and applying 2 coats of synthatic enamel paint (corrugal paint) on CGI sheets.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified.

M&L 2nd class hard wood in scantling fixed in clean sawn all as specified.

All as per item no 09 above, but except timber.

M&L preparing of surfaces of wood and wood based material, new of any description and girth, not other wise described and treated with two coats of creosote oil complete all as specified and as directed.

Dismantling Mild Steel works of any description and all as specified.

S&F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in Fe410-W (Gde-E - 250) quality A.

S&F rolled section as in joist, channel, angle or tee sections, fixed independently without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe410-W (Gde-E - 250) quality A.

M&L preparation of newly steel surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide.

Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements.

S&F in repairs Plaster of paris decorative moulding as in cornices 100mm to 200 mm wide and n exc 25 mm thick fixed with screws all as directed and approved.

M&L for repairing any type of false ceiling as in repairs ie 0.36 sqm and up to 2.00 sqm with the existing type of false ceiling materials such ad boards,ply wood,PVC, wooden fillets/scantling ,supporting arrangement etc and if neccessary removing,adusting and refixing the required false ceiling all as specified and directed

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum unhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (filles,metalframe work (Fillets,metal frame work and G.I. wire mesh paid sepretely)

M & L for applying 3mm thick wall care putty on wall,ceiling all as directed and specified.(Make : Birla wall care putty/JK wall care putty/ Berger Wall care putty)

Preparation of surfaces of any description old or new surfaces of ceilling surfaces such as gypsum boards, plaster of paris,wooden/plywood, cemented works etc all as specified and directed.

M&L for applying one coat of primer as per manufacturer instructions for OBD, Oil emulsions etc complete all as specified and directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.

S&F 4mm thick Non asbestos fibre cement building boards (E-boards) fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete.

Demolition of Stone boulder masonry built in Cement mortar all as specified and as directed.

M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and as directed.

All as per item no. 23 above but except stone all as specified and as directed. (Material shall be obtained from item No 22 above)

M&L Precast cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in bond stones for stone walling and set in cement mortar 1:6 with plain fair faces, incl chamfers, weathering throating etc & getting in cement mortar complete all as specified and as directed.

M&L Raised pointing to RR masonry surfaces in cement mortar 1: 4 all as specified and as directed.

Supply only 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes.

M&L Hand packing using Broken stone or boulders (any thickness) at back of RR stone masonry retaining wall and raising or lowering to the required level complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel designed with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core complete all as specified and as directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F mild steel hold fast and similar confirming to Fe- 290 Gde-E-165 complete all as specified and as directed.

S&F 25mm dia stainless steel curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed by Engr-in-charge. Note : Brackets & Nobs to be paid separately.

Supply only curtain rod side brackets of stainless steel, angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge.

M&L for coloured aluminium anodised sliding window on 2 tire frame of section 62mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 5.5 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement etc complete all as specified and directed by the Engr-in-Charge.

M&L for coloured aluminium anodised fixed type window of frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 5.5 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement etc complete all as specified and directed by the Engr-in-Charge.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, fitted with cut and mitred beads for securing glass, etc incl edges of sash bars and framing moulded complete all as specified and as directed.

S&F 30mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled.

All as per item no 37 above but 75mm size.

S&F 250 mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.

S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section.

S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane..

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:4 incl finished even and smooth w/o using extra cement all as specified.

M&L Preparation of plastered surfaces of walls and applying three coats of cement base paint complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise.

M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 all as specified and as directed.

M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L screed bed 10mm thick on wall surfaces for fixing wall tiles in CM 1:4 complete all as specified and as directed.

M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry & pointd in coloured cement to match complete all as specified and as directed.

All as per item no 56 but as in skirting complete all as specified and as directed.

M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry & pointed in colour cement to match complete all as specified and as directed.

S&F Vitrified tiles 10 mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of dark shade.

S&F Vitrified tiles 10 mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade.

Supply and fix vitreous China snow white wash down water closet pan (pedestal pattern) with concealed ‘S’ trap, front or back inlet, fixing bolts,soft close seat cover including twin flush fittingsand making all necessary connections complete as directed by the Engr-in-Charge. Make : CERA or equivalent.

S&F in repairs Vitereous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rest excluding flushing cistern and flush pipe complete all as specified and as directed.

Supply and fix vitreous china, white, flat back wash hand basin of size 550 mm x 440 mm fixed with and including CP brackets (of suitable size) including providing 15 mm bore PVC connector pipe, 32 mm bore brass chromium plated waste coupling, 32 mm dia PVC waste pipe, 32mm bore CP bottle trap complete including taking down old wash hand basin alongwith fittings all as specified. [Make : Hindware Cat No. 10010 or equivalent of approved make]

Supply & fix Central Hole Basin Mixer, cast copper alloy,chromium plated, including taking down old unservicable one. Make : JAQUAR Code- 167 KNB or equivalent approved product of MARC/ESSESS.

S&F bib taps cast copper alloy chromium plated, fancy type, long body, concealed type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore .

S&F angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm

Supply & fix Hand Shower (health faucet) alongwith 1m flexible tube. Make : For hand shower, JAQUAR Code-ALD-573 or equivalent approved product of MARC/ESSESS.

Supply and fix glass shelf 600mm long assembly with CP bracket, fixed to plugs with brass screws on wall complete all as directed. Make:Jaquar Cat No ACN-1171N or equivalent.

Supply & fix CP Toilet roll Holder fixed to walls with chromium plated (CP) brass screws. Make : Jaquar 'Continental Series' Cat No AKP-35751P or equivalent

Supply & fix 5.5mm thick looking mirror bevelled edge, mounted on walls and fixed to wooden plugs wih chromium plated brass screws and cup washers complete all as specified and as directed by the Engr-in-Charge.

Supply and fix single towel rail 600mm long fixed with and including Chromium plated brass screws and wooden /plastic cleats complete all as directed by the Engr-in-Charge. Make : Jaquar 'Continental Series' Cat No ACN-1111NM or equivalent

Supply and fix CP corner glass shelf with bracket fixed with screws complete all as directed by the Engr-in-Charge. Make : Jaquar Cat No 1173

Supply & fix Wall Mixer 3 in 1 system, with provn.of both hand shower and overhead shower complete with 115mm long bend pipe and wall flange(without hand and overhead shower). Make : JAQUAR Code- 281 KN or equivalent approved product of MARC/ESSESS.

Supply & fix 100mm dia Overhead Shower alongwith 190mm long shower arm casted, fixed to 15mm bore pipe or union. Make : Overhead Shower- JAQUAR Code- OHS-1989 or equivalent approved product of MARC/ESSESS. Shower Arm-JAQUAR Code-SHA-483 or equivalent approved product of MARC/ESSESS

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

S&F PVC bends any radius 75 mm dia

S&F PVC (SWR) pipes 100 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC bends any radius 100 mm dia

Taking down steel tubing and connection including cleaning for refixing or removal to store complete

(a) 15mm dia

(b) 20mm dia

S&F tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

(a) 15mm dia

(b) 20mm dia

S&F in repairs 500ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified.

MAYUR ENTERPRISE

Ravi enterprise

SHAM AND CO