8414/E8 REPAIR/REPLACEMENT AND MAINT OF SECURITY LIGHT, STREET LIGHTS, GATE LIGHT/PTLS, REPAIR OF DG SET AND OTHER CONNECTED WKS AT RTS AND DEPOT HEMPUR UNDER GE (EAST) BAREILLY

Amount

M&L for pin type porcelaine, vitreous,brown insulator including one galvanised mild steel spindle,two galvanised iron washers and galvanised iron nut, 100 mm height,65 mm dia for 1100 Volts grade including taking down unsv insulators complete all as specified and directed.

Supply and fixing shackle type insulator, porcelain, white brown, or green insulator of size 100x115mm (Height 100 mm and 115 mm dia) with section strip 31/5 mm and 14 mm bolt for 1100 Volts grade including taking down unsv insulators complete all as specified and directed.

M&L for pin type composite insulation/silicon rubber material including one galvanishing MS spingle, nuts & washers of 150mm height, 150 mm dia for 11000 volt grade and fixing to the pole/structure and binding of conductor including taking down complete all as specified and directed.

M&L for preparation of old painted steel surfaces of LT/Street light steel tubular/swaged/rail poles of 9m to 11m long including brackets, clamps, channels and cross arms by cleaning of oils, lubricants, grease etc. complete above PCC coping and applying two coats of aluminium paint on surfaces 1m above PCC coping, applying two coats of synthetic enamel paint in zebra pattern with Aluminium and red colour combination up to 1m height above PCC coping; writing MES No. of poles (Number size shall be 25mm and lettering shall be 40mm) complete including applying two coats of white wash on exposed concrete surfaces of coping to poles duly preparing the surfaces all as directed.

Trimming of tree branches along the LT overhead line up to 1.5 mtr from OH line to tree around the parameter, including cleaning and removing rubbish upto a distance of 50 mtr outside the periphery of the area,unit area complete all as specified and directed. Note:-Span shall be considered the distance between pole to pole.

S & F PVC LT over hèad electric supply line separator/ spacer for two wires complete as specified & directed.

S & F PVC LT over hèad electric supply line separator/ spacer for three wires complete as specified & directed.

S & F PVC LT over hèad electric supply line separator/ spacer for four wires complete as specified & directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 100 to 160 Amps with breaking capacity 36 KA complete all as specified and directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

M&L in repairs for MCCB 4 pole, 415 volts, adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

M&L in repairs for MCCB 4 pole, 415 volts, adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and directed.

M & L Danger Notice plate of 1.6 mm thick mild steel, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS clamps, bolts and nuts of approved size for LT 20X15 cm size complete all as specified and directed.

Dismantling steel poles/struts, any size complete all as specified and as directed.

Dismantling insulators any type, any size complete all as specified and as directed.

Dismantling stay assembly complete (demolition of concrete, etc. and excavation measured separately) all as specified and as directed.

Dismantling of ACSR or AAC conductors complete all as specified and as directed.

Material and labor for stretching LR/HT Sagged/Broken ACSR conductor of any size including replacement of UNSV/ damaged shackle/pin type porcelain insulator including necessary nut bolt as per site requirement complete all as specified and directed

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint compelte all as specified and directed.

M&L for GI continuous earth wire of size 3.15 mm or 4.00 dia for cradles, gurading and earth continuity on HT OH pole including suitable, binding wires etc complete all as specified and directed.

S&F LT stay assembly set comprising of stay bow, galvanised 20mm dia 400mm long stay rod 20mm dia GI stay bow, 1800 mm long with nuts, bolts, washers, MS stay plate, 02 Nos thimble and clamp etc required with all accessories as specified. Note :- Loop type insulators, excavation, earth work, concrete for foundation shall be measured and paid separately under respective item of Sch 'A'. compelte all as specified and directed.

S&F loop type insulator large size with over all dimension 90x140 mm clearance of hole 25.5 compelte all as specified and directed.

M&L for HT steel tubular poles complete with cast iron base plate, final taper plug, bolt, nuts and screws as specified type 410 SP-55 (11mtr long). Including painting pole with two coats of bituminous paint internally and external embedded portion in ground concrete and painting exposed surface with two coats of aluminum paint over one coat of red oxide primer including taking down of existing HT pole of any size and re-fixing of chaneel, insulator and electric connection etc, complete all as specified and directed.

M&L for LT steel tubular poles complete with cast iron base plate, final taper plug, bolt, nuts and screws as specified type 410 SP-31 (9mtr long). Including painting pole with two coats of bituminous paint internally and external embedded portion in ground concrete and painting exposed surface with two coats of aluminum paint over one coat of red oxide primer including taking down of existing LT pole of any size and re-fixing of chaneel, insulator and electric connection etc, complete all as specified and directed.

M&L for GI pipe ,light grade 80mm dia for road crossing of cable for cable protection laid in trenches or above ground surface, complete all as specified and directed.

All as per above but here in before of size 40mm dia .

Supply and fixing for LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size & IP 65/66 protection, complete all as specified and as directed.

All as per above but here in before of 90 watt 230 V AC outdoor type complete all as specified and directed.

All as per above but here in before of 120 watt 230 V AC outdoor type complete all as specified and directed.

S & F for GI Bracket made out from GI pipe 25/32mm dia bend to shape as required, 1.2Mtr long fixed on wall with flat iron clamps of size 25 x 4mm - 2 Nos with the help of bolts, nuts, washers etc for fixing of security light fitting, complete all as specified and as directed.

Supply and fixing for Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

All as per above but here in before of 40 watt 230 V AC outdoor type.

Supply and fixing LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured separately) complete with IP 65/66 protection, complete all as specified and as directed.

Supply and fixing for LED flood light fittings 210 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size & IP 65/66 protection, complete all as specified and as directed.

All as per above but here in before of 120 watt 230 V AC outdoor type.

All as per above but here in before of 100 watt 230 V AC outdoor type.

Repairs/replacement of solar street light by dismantling panel, battery, PVC battery box, PVC wire LED light etc complete all as specified and directed.

Supply only for PVC Battery box complete all as specified and directed-

Supply only for solar LED light 12 Watt complete all as specified and directed

Supply only for solar panel 50 watt complete all as specified and directed.

Supply only for solar charger controller panel complete all as specified and directed.

Supply only for battery 12 volt 40 AH fully complete all as specified and directed.

Supply and fixing in replacement of lead acid battery 12 Volt, 150 AH, suitable for 25 KVA to 63 KVA DG Set complete all as specified and as directed.

Supply and fixing in repairs LED out door driver divices for street light 45/60/72 Watt, 220V 50Hz , complete all as specified and directed.

S & Install Automatic Out door single phase Street light Timer Switch 230 Volts with batery back up fixing on LT over head line Electric Pole complete making functional all as specified & directed. Make- L &T/ Siemens/RMG

M & L for Junction boxes with PVC water tight encloser, ready made type, aluminium bus bar 25x3 mm, 200mm long fixed on post insulators, nut & bolts, MS Camps including 2.5 sqmm cable for street light connection& controlling with one number single pole MCB 6A, 230 Volts complete all as specified and directed..

S&F in repairs Digital multi programmable electronic timer capacity for 24 hrs clock, 3 phase, 415 volts, 50 Hz, complete all as specified and as directed.

M & L for Grass and weeds killer chemical 5 Ltrs capacity of make Roundup, complete all as specified and directed.

S&F LT rubber mat of size 1.0mx2.0mx12 mm at water supply installations, complete as specified and directed.

Supply and fix in repair MNX contactor 16Amps to 40Amps, 3 Pole with NO and NC complete all as specified and directed. Make : L & T.

Supply and fix in repair MNX contactor 40Amps to 100Amps, 3 Pole with NO and NC, complete all as specified and directed. Make : L & T.

Supply and fix in repair spare kit for MNX contactor 16Amps to 100 Amps, 3 Pole, complete all as specified and directed. Make : L & T.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm x 4 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed.

All as per above but here in before of size 16 sqmm x 4 core.

All as per above but here in before of size 16 sqmm x 2 core.

All as per above but here in before of size 10 sqmm x 4 core.

All as per above but here in before of size 10 sqmm x 2 core.

All as per above but here in before of size 6 sqmm x 2 core.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed.

Material and labour for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :- Only compacted thickness of sand will be measured and paid separately.

Cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.

M&L PCC 1:2:4, type B1 (using 20 mm graded granite stone aggregate) as in coping for steel pole including necessary formwork complete all as specified.

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for road/Hard standing cutting complete all as specified and as directed.

M &L in replacement Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with GI earthstrip 32x6 mm by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked) of 40 mm bore for protection of earthstrip of 32x6 mm including PCC with 1:2:4 type B1 using 20mm graded crushed stone aggregate CI frame and cover of angle iron 40x40x6mm and handle 6mm dia MS bar made to shape GI light grade20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, charcoal and common salt filling, test point made out of Bronze/Gun metal with fixing arrangment , funnel, wire mesh and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Metres , all as per electrical plate No3 of SSR 2009 Pt -I to earth test point compelte all as specified and directed or indicated including testing on completion. NOTE :- The quoted rate of earthing shall be deemed to included cost of 7.5 m long galvanised strip 32x6 mm and protection pipe of 40 mm bore medium grade(ISI marked).

Repair/Maint of DG Sets works:- Routine maintenance consisting of normal repairs with periodical routine maintenance,attending breakdown as and when required and testing of DG set complete i.e. Engine, Alternator etc including all consumables items like cotton, waste cloth, kerosene oil etc. Maintenance will be carried out as all directed and comprising of the following :- (i) Change engine oil. (ii) Check clearance of suction and exhaust valves and adjust if required. (iii) Changing of oil filter, fuel filters, screen filters assy. (iv) Changing of water filter element. (v) Topping up of coolent. (vi) Change of Hydraulic governer oil. (vii) Tightening of all nut bolts.(viii) Greasing of all points. (ix) Cleaning of fuel tank by taking out the dirt and sludge, cleaning the tank thoroughly. (x) Adjusting valve tappet clearence/timing (xi) Injector pressure test cleaning and repairing,tightining fasteners and making lubrication leak proof (xii) Repair/rewiring of broken/damaged control panel connection including measuring instruments, indicators,engine proction devices etc NOTE: (a) Lub oil, Engine oil required at the time of maintenance / testing will be incuded in unit rate quoted and coolant will be paid separately. (b) Labour charges for dismantling / taking down and replacement / refixing new parts as and when required is deemed to be included in unit rate quoted. (c) Spare parts like oil filter, fuel filter, screen filter by pass filter etc will be measured and paid separately.

(a) 63 KVA DG Set

(b) 40 KVA DG Set

(c) 30/25 KVA DG Set

M&L for conditioning of battery 12 Volt, upto 150 AH, to drain out distilled water, Acid and taking out damaged lead plates complete for replacing lead plates of suitable weight & size including filling fresh lead acid, distilled water, microporus seperater complete and testing.

M & L for taking out self starter 12/24 volt from the DG Set, transportation to workshop opening/disconnecting all internal connection, cleaning the same taking out burnt armature, segrigation of serviceable parts for re-use, rewinding of armature with copper wire of existing size. Reassembling the same with replacement of following items also:- (a) carbon brush 01 set, (b) Beadex pinion 01 no, (c) Half clutch assy 01 No, (d) Field coil 01 No, (e) solonoid switch 01 No., (f) commitator 01 nos and refixing the self starter on the engine at site and testing on completion all as specified and directed.

Supply and fixing Battery terminal cable, copper conductor multi strand, unsheathed, single core 25sqmm, 1.5 mtr long fixed with copper terminals on both side suitable for 12 Volts & upto 180 AH/150AH battery complete all as specified and directed.

M&L for dismentaling the unserviceable radiator for DG set of undermentioned capacity from engine, transportation to the workshop, repair the tank / storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing and testing complete for the following sets.

(a) 63 KVA DG Set

(b) 40 KVA DG Set

(c ) 30/25 KVA DG Set

M & L for dismentaling turbocharger assembly from the DG set of undermentioned capacity from engine, transportation to work shop for repair, cleaning and carrying out inspection of each components / spares segrigation of serviceable spares for reuse including Decarbonising machine, cutting, grinding polishing etc and re-assembling the Turbocharger with replacement of spare parts and refixing on existing position complete for the following sets. (NOTE:- Spares required will be measured and paid separately under respective items).

(a) 63 KVA DG Set

(b) 40 KVA DG Set

(c) 30/25 KVA DG Set

M & L for Taking out exhaust silencer box and pipe from the DG set, decarburizing and cleaning the silencer box including replacement of nut, bolts, washers clamp/bracket and refixing and wraping with asbestos rope and powder complete all as specified and directed. (NOTE :- Asbestos rope and powder will be included in same quoted rate under respective items.)

M & L for Dismantling of injector assembly of the DG set of under mentioned capacity from engine for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair item as required for the follwing set complete all as specified and directed..

(a) 63 KVA DG Set

(b) 40 KVA DG Set

(c) 30/25 KVA DG Set

Supply only Injector kit in repair for incorporated to the injector assy.

M & L for replacement of unservicable parts with the new one, conforming to their respective part nos. for the follwing mentioned items after dismentaling the 25 to 63 KVA DG sets incorporated in the item No.1, and taking out the unservicable parts, for the following set :-

(a) Cylinder liner assembly

(b) Piston

(c) Piston Ring

(d) CR bearing

(e) Main bearing

(f) Head Gasket.

(g) Engine Gasket

(h) Engine Valve

(j) Valve Guide.

(k) Valve Seal

(l) Oil seal assembly

(m) Nozzle 'o' Ring

(n) Main Oil seal

(o) Fly wheel Ring gear

(p) Fan belt

(q) Copper Washer

(r) Hose pipe with clamps

(s) Teflon Oil seal

(t) Nut with bolt

(w) C R bush

(x) Thrust Washer

(y) Nozzle valve

(z) Fuel pipe (inlet & outlet pair)

(aj) Thermostate valve

(al) Radiator Fan

(am) Valve solenoid

(ap) LO Temprature Guage

(aq) LO Pressure Guage

(ar) Water Temp. Guage

(as) Air filter

(at) Lub oil filter

(au) Fuel filter

Supply only anti freeze radiator coolant (Make-HP/Servo/Castrol) complete.

M & L for dismentaling and Taking out burnt/damaged coupling shaft fan from alternator of 25 KVA to 63 KVA DG Set and supply and fix Coupling shaft with complete assembly suitable for upto 63 KVA DG Set including cleaning and applying insulating material on existing winding of alternator and testing complete all as directed.

M & L for removing Alternator 415 V 3 Phase 4 wire system from engine both mechanically and electrically, transporting to local workshop, dismantling the alternator, removing the burnt out winding wire and rewinding of stator winding with same gauge copper wire and turn with "F" class insulation, varnishing, heating, drying, greasing the bearings and rotating parts and assembling back after aligning with engine including testing on load as directed for the following capacities :-

(a) 63 KVA DG Set

(b) 25 to 40 KVA DG Set

M&L for Painting to the DG Sets of any capacities by prepration of old painted surfaces, cleaning & removing of existing rust grease oil spot etc,priming with aluminium red-oxide and then applying 1st grade of synthetic enamelled spray paint (two coat) of approved make, brand and colours (includes cost of paint) including fuel tank foundation base and panel board complete.

M & L for finding out defects of Fully Automatic Electric panel (AMF) of DG set and Taking out burnt interconnection wiring including u/s and serviceable components for reuse including Rewiring of panel using existing size of copper cable, ferrule, lugs, insulating material, nut bolt washer of various sizes refixing serviceable items including replacement of Contactor of any Model & amps capacity, 240 volt coil of any Make and Part No. and testing complete.

Supply and fix in repair of ignition switch with key for DG set complete all as specified and directed. Make : Minda or other equivalent make.

Supply only diluted sulphuric acid specific gravity 1250 for lead acid batteries complete all as specified and directed..

Supply only distilled water for batteries in 5 litrs of can complete all as specified and directed..

Supply and fixing for power contractor, 3 pole with AC coil, 415 V, 20 KW, 100 A and auxillary contract 2 No + 2NC complete. Make ABB/L & T/Havells/Schiender

Supply & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 25 to 63 KVA complete all as specified and directed Make- Kirloskar after taking out the unserviceable one.

Supply only K Cool oil for DG set as approved by engineer in charge complete all as specified and directed

Supply & Fixing in replacement for Speed contrl unit series ESD 5100 (Model No - IMPRORTED GAC ESD-5111) for DG set working voltag 12-32 Volt DC, out put current rang 0-5 Amps, speed sensor signal 0.5, 120 Volt AC RMS, operating Ambient teprange rang -40 degree to + 85 degree, relative humidity 95%, speed range 1k-7.5 kHZ, spped trim range ± 200 HZ, grass weight 0.65 kg complete all as spesified and directed.

M/s Abhay Enterprises (BID ID -3383626)

HASINI ENTERPRISES (BID ID -3369945)