REPAIR AND MAINT OF STREET LIGHTS, PERIMETER LIGHTS AND CERTAIN OTHER WORKS AT AGE CHARDUAR AREA UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene (XLPE Cable) insulated, two or more core galvanised steel strip or wire armoured, ISI-7098 Mark, with aluminium conductor mutlistranded, heavy duty 1100 Volts grade complete all as specified laid in trenches / laid under floor or fixed naked with walls/ on poles/ in ducts / in GI pipes etc. complete all as specified and directed of following sizes:- (Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles / block, Clamps, nuts, Bolts, washres and pipe shall be measured and paid separately under appropriate items).

25 Sq mm cross sectional area, 4 core.

35 Sq mm cross sectional area, 4 core.

50 Sq mm cross sectional area, 3½ core.

Supplying and fixing in repair, connecting , testing and commisioning MCCB including lugs in panels etc 415 Vots, 50 Hz rating of the following capacity complete all as specified and directed :-

MCCB 63 Amps, 3 pole, 415 Volts, 50 Hz, 16 kA in existing panels / sheet metal enclosures complete all as specified.

MCCB 160 Amps, 4 pole, 415 Volts, 50 Hz, 36 kA in existing panels / sheet metal enclosures complete all as specified.

MCCB 200 Amps, 4 pole, 415 Volts, 50 Hz, 36 kA in existing panels / sheet metal enclosures complete all as specified.

MCCB 250 Amps, 4 pole, 415 Volts, 50 Hz, 50 kA in existing panels / sheet metal enclosures complete all as specified.

Supply,fixing and connecting automatic electro mechanical street light timer switch complete in all respect comprising of input and output terminals completely prewired with suitable size copper wire,bekelite sheet cabinet and time switch. Unit should encased in weather proof MS sheet enclosure with lockable arrangement having TPN copper bus bar 100 Amps 415 volts AC and painted with one coat of anti corrosive solution,one coat of red oxide primer and two coats of spray painting with super enamelled paint of approved colour and having provision of cable entries (incoming/outgoing) and mounted in angle iron frame of suitable height including grouting with PCC complete all as specified and directed comprising of the followings:-

MCB TPN 63 amps 415 volts AC-01 Nos.

MCB SP 63 amps 415 volts AC-02 Nos.

contactors 32 amps capacity for auto and manual switching separately

Toggle switch for manual operation

Programmble time switch 24 hrs

Labour for Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store. Note :- It shall be ensured that the fittings if found unsv, shall be made serviceable for the entire period of contract with in a period of 8 hours after notifying by the engineer in charge. However the payment shall be made once only during the entire contract period.

Supply,fixing and connecting new generation energy saving environment friendly long life LED street light made up of pressure die cast aluminium housing with high power LEDs as light source and lens embedded PC cover with IP-65 protection and impact resistance of IK07 having 35 watt , minimum 100 lumens/watt, 4 KV surge protection, PDC housing, LEDs with prewired and necessary mounting and connecting arrangement to overhead street light feeder complete all as specified and directed including taking down of old/unsv street light fitting of any description Make- Phillips Cat Part No - BRP050 LED 036 CW R1 MF PC S1 PSU GR or Equivalent of (i) Crompton (ii) Wipro (iii) GE

M&L for Supply,fixing and connecting new generation post top energy saving environment friendly long life aesthetically designed with symetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source of 25 watt 5700K, minimum 90 lumens/watt, IP65, 4KV Surge Protection, PDC Housing complete all as specified and directed including taking down of old/unsv post top lantern of any description. Make- Phillips Cat Part No - BRP020 LED HP/CW 240V 25 or Equivalent of (i) Crompton (ii) Wipro (iii) GE

Supply,fixing and connecting new generation energy saving environment friendly long life LED street light made up of pressure die cast aluminium housing with high power LEDs as light source and lens embedded PC cover with IP-65 protection and impact resistance of IK07 having 50 watt , minimum 110 lumens/watt, 4KV surge protection, PDC housing, LEDs with prewired and necessary mounting and connecting arrangement to overhead street light feeder complete all as specified and directed including taking down of old/unsv street light fitting of any description. Make- Phillips Cat Part No - BRP060 LED 58 CW RM S1 PSU or Equivalent of (i) Crompton (ii) Wipro (iii) GE

Supply,fixing and connecting new generation energy saving environment friendly long life LED street light made up of pressure die cast aluminium housing with high power LEDs as light source and lens embedded PC cover with IP-65 protection and impact resistance of IK07 having 60 watt with minimum 110 lumens/watt, 4 KV surge protection, PDC housing, LEDs with prewired and necessary mounting and connecting arrangement to overhead street light feeder complete all as specified and directed including taking down of old/unsv street light fitting of any description Make- Phillips Cat Part No - BRP060 LED 64 CW RM S1 PSU or Equivalent of (i) Crompton (ii) Wipro (iii) GE

Supply,fixing and connecting new generation energy saving environment friendly long life LED street light made up of pressure die cast aluminium housing with high power LEDs as light source and lens embedded PC cover with IP-65 protection and impact resistance of IK07 having 75 watt 5700K, with minimum 90 lumens/watt, 4 KV surge protection LEDs with prewired and necessary mounting and connecting arrangement to overhead street light feeder complete all as specified and directed including taking down of old/unsv street light fitting of any description. Make- Phillips Cat Part No - BRP408 LED HP/CW 240V PSU GR 70W or Equivalent of (i) Crompton (ii) Wipro (iii) GE

Supply,fixing and connecting new generation energy saving environment friendly long life LED flood light made up of pressure die cast aluminium housing with lens IP-65 protected having high power LEDs as light source and lens embedded PC cover of 70 watt , minimum 90 lumens/watt LEDs with prewired and necessary mounting and connecting arrangement to overhead street light feeder complete all as specified and directed including taking down of old/unsv street light fitting of any description. Make- Phillips Cat Part No - BVP182 LED70 CW or Equivalent of (i) Crompton (ii) Wipro (iii) GE

Dismantling/uprooting of old deteriorated PCC/steel tubular pole of any description and supplying, transporting, erecting in truely vertical steel tubular swaged poles type 410 SP-31 (9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts,nuts and screws as specified, including necessary excavation and earth work, PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C1 as in plinth block and coping, disposal of surplus soil to a distance not exceeding 50m and depositing where directed, painting of exposed surfaces of steel tubular poles with two coats of Aluminium paint over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black enamel paint) from plinth block and numbering of poles, painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed.

M&L mild steel cross arms, bracings, supports, clamps, and back plates fabricated from structural steel sections including nut, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat with red oxide Zn chromium and two coats of synthetic enamel paint all as specified.

Fixing only mild steel cross arms, bracings, supports, clamps, and back plates fabricated from structural steel sections including nut, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat with red oxide Zn Chromium and two coats of synthetic enamel paint all as specified.

M&L for stay assembly comprising of 7/2.24mm galvanised MS stranded wire of rquired length fixed to pole with and including flat iron clamps fabricated out of 50x6mm flat iron and nuts,bolts & washers of suitable size, 40cms long 14mm dia galvanised MS stay bow, 215cms long 20mm dia stay rod with threaded end including bolts & washers, MS stay plate galvanised 230x230x6mm, two thimbles,loop type insulator of size 65x90mm with clearance dia of hole 20mm including necessary excavation, earth work and PCC 1:4:8 type D2 using 40mm stone aggregate complete all as specified and directed.

Supply and fixing in replacement of bracket for street light fitting fabricated with 1200 mm long and 40 mm bore medium grade GI pipe bent to shape as required and fixed in position including necessary clamps,nuts,bolts & washer all as specified and directed.

S&F Danger notice plate 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red color and fixed with M.S. clamps, bolts and nuts, of approved size, for LT, 20x15 cm size complete all as specified.

Supply and fixing or connecting service cable 2 core 10 sqmm 1100 volts grade heavy duty flat or circular PVC insulated aluminum multistranded conductor served with inner sheathing of PVC and overall PVC sheathed on service connection complete all as specified and directed.

Ditto all as item No-17 hereinbefore but of size 6 sqmm 2 core cable.

M&L for painting of erected steel tubular swaged poles of LT over head line (Except embedded protion), 9 M long complete including all MS mounted/fixed with pole, earth protection & water pipe (if exists) with one coat of aluminium paint and providing 05 Nos bands/ straps with synthetic enamel paint (black and yellow 30 cm wide each) from top of plinth block and numbering of poles with white synthetic enamel paint on black ground complete all specified.

Dismantling/lowering down the sagged conductors of any description/size or rating from LT poles of any height after removing binding wires/jumpers from insulators and restreching only existing LT OH lines consisting of 2 conductor to 7 conductor of ACSR lines and one GI earth wire of any size and tightening/streching it to permissible sag and binding/re-jumpering with aluminium binding wire of suitable size including replacement of defective/broken insulators of any type complete all as specified and directed. (Note :- (i) Linear length centre to centre of the poles shall only be measured). (ii) Insulators shall be measured and paid separately. (iii) cost of binding wire is deemed to be included in the unit rate quoted by contractor and no extra cost shall be paid for the same.

Supplying, straining and stretching of over head aluminium conductor steel reinforced (ACSR) of any size on HT/LT poles upto permissible sag and binding/jumpering with aluminium binding wire of suitable size including replacement of defective/broken insulators of any type complete all as specified and directed. ( Note :- (i) Linear length centre to centre of the poles shall only be measured). (ii) Insulators shall be measured and paid separately. (iii) cost of binding wire is deemed to be included in the unit rate quoted by contractor and no extra cost shall be paid for the same.

S&F insulator pin type, porcelain, vitreous, white, brown or green, insulator including one galvanised mild steel spindle, two galvanised iron washres and one glavanised iron nut, 100 mm height, 65 mm die. For 1100 volts grade complete all as specified.

S&F insulator shackle type, porcelain vitreous, white, brown, white or green including, galvanised mild steel straps washers, insulator bolts, washers and nuts, 100 volts working pressure, 75mm height, 90 mm Maximum dia with 31x3 mm galvanised steel straps and dia of bolt 12 mm complete all as specified.

Dismantling insulators any type, any size including setting aside serviceable and removal of rubbish material.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundations etc. or for shafts, well cess pits, manholes, pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing /trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning, filling in , including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft/oose soil complete all as specified.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the strating point complete all as specified.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in tenches below and around under ground cable including spreading and levelling complete as specified and directed.

M&L laying well burnt old size bricks, sub calss "B" bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cablefor protection all as specified.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate to less than 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thikcness of 15 cm connected to GI earth wire of 4 mm dia by means of nuts, bolts and washers to earth plated at one end and other end to contineous GI wire of OH lines/lighting arrestor or street light poles etc,checknuts of GI and protction by the GI pipe light grade 15 mm nominal bore for earth lead wire from earth plate to 1500 mm above GL with FI clamps made out of 25x3mm fitted with nuts, bolts and washers and 2.5 m long watering pipe light grade of 20 mm nominal bore , 0.63 mm thick CI funnel, wiremesh, etc. complete including necessary earth work and excavation in soft/loose soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100 mm c/c both ways, earth phophrous bronze testing point , maing good etc. all as specified and shown in electrical plate of SSR- Part-I.

Supplying and fixing galvanised mild steel pipe/ tubing, 'Light grade' of 50mm bore complete with all fittings, laid in trenches/ under roads, drain , paths, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washerws complete all as specified of the following bore (Note :- Excavation & Earth work, Mild steel clamps, bolts, nuts and washers shall be measrued and paid separately)

M&L for plain cement concrete for embedding posts type B-2 1:2:4 (40mm graded crushed stone agg) all as specified and directed

M&L for fabriation of fedder pillar box , powder coated of timelite distribution boards for automatic switching of street lights , internally pre wired by using suitabe copper lugs including fixing wih MS clam 40x5 mm to steel/RCC poles including connection consisting of followings

(i) Astronomical time switch 24 hrs operation 240 volts

(ii) 3 pole contacter 40 amps

(iii) MCB SPN 63 amps

(v) Indicating lamp for R-Y-B phase neon type- 01 set of three

supply & fixing LT Bus bar box of size 0.90x 0.50x 0.45 mtr, outdoor type made out of 3 mm CRCA sheet with front opemable door ssystem with necessary locking arrangement suitable for outdoor installation the bottom of the panel contains a detachable plate having provision for entey of armoured cable of adeqaute size with glands and mounted on 40x40x5mm angle iron feame fixing with PCC block suiitable size . the box shall have 3 phase suitable size aluminium bus bar of rating 200 amps including mounted on epoxy insulators duly painted two coat of paint over a coat of red oxide with necessary supports and comprising of the followings:-

(i) MCCB 63 A, 4 pole, AC, 415 Volt, 50 Hz,36 KA thermal adjustible between 70-100%,-01 No

(ii) Ammeter 0-100 Amp digital type with CTs ratio 100/5-01No

(iii) Volt meter 0-500 V digital type-01 No

(iv) indicating lanp for R-Y-B phase neon type -01 set of three

Supply & fixing of transparent street light junction box of size 200 mmx160mmx98mm made of high quality polycarbonate I IP-65 (Dust and Power Jet proff according to IEC 60529), shock proff, dust free, corrosion free acd and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II) made of Helogen and silica free recycleable material, UV resistant having high grade gaskate made of polyurethane with copper bush bar 25 x5 mm-4 strip, one no MCB DP 6 Amps with locking arramngement and 2 nos M40 Size cable gland and one M32 Galand suitable upto 50 sqmm cable etc complete all as specified and directed. Make: HENSEL CAT NO KF9255 OR EQUIVALENT MODEL OF BCH/LEGRAND.

Supply & fixing of Bushbar pannel board with fabrication - 2mm thick CRCA sheet, Bus Bar -200 A Aluminium Bus bar with Dimension :- 800 (H) x 600 (W) x 35 (D) all as specified and directed.

Trimming of tree branches touching to LT / HT OH lines not exceeding 30 cm girth, shrub, vegetaion, bush and saplings at least upto 5.0 M from outer edge of ACRS including cleaning of road/path/fencing etc. complete all as specified and directed.

shyam constructions

M/S Deep-Jeet

Anil Kumar Sarmah

M/S Inder SINGH SABARWALL

D G Corporation