Pilot Project for Dewatering and Lowering Sub Soil Water (SSWL) by deploying 30 Nos. Submersible pump and disposal through HDPF Pipe line into Chhapra Drain in Vill. Banwasa ( Baroda Constituency)

Amount

Supplying G.I pipe Class-B with IS: 1239 in 3.05 mt length welded flange on bothside and jointing with pumping machiner & lowering complete 100 mm i/d (HSR Item No. 28.52)

Supplying & jointing three core 4.00 sq.mm flat cables of finolex Polycab including cost of jointing materials as well as carriage loading, unloading etc. complete in all respect.(HSR Item No.31.59)

Drilling of bore 250mm dia bore by mechanical means in all kinds of soils including cost of all stablilzing material, transportation of rig and contingent equipment to the site of works including cost of casing pipe white boring and extracting the same.

Supply & lowering of 225 mm outer dia pvc pipe 10 kg sq cm2 as per ISI 4985-1981 as amended upto date duly ISI mark for housing pipe 4 to 6 mtr Random length with threaded end with required of Nos of PVC Sockets including cost of scaffolding derricks, jim poles , tools and plants etc. complete to the satisfaction of the Engineer-in-charge

Supply & lowering of 225mm outer dia pvc pipe 10 kg sq cm2 slotted pipe as per ISI 4985-1981 as amended upto date duly ISI mark for , screwed both ended, random length 4 to 6 mtr threaded end with inside threads to match the pipe threads lowering into bore hole in vertical position complete in all respect to the satisfaction of the Engineer -in- charge

Prov. & fixing G.I. Bend 4" x 90 as per ISI 4985-1981 as amended upto date and satisfaction of the Engineer-in-charge

Prov. & fixing G.I. Nipple 4" x 12" as per ISI amended upto date and satisfaction of the Engineer-in-charge

Prov. & fixing M.S.Cap for 225 mm outer dia PVC pipe 10kg cm2 as per ISI 4985-1981 as amended upto date and satisfaction of the Engineer-in-charge

Supply & fixing PVC End Cap for 225 mm outer dia PVC pipe 10kg cm2 as per ISI 4985-1981 as amended upto date and satisfaction of the Engineer-in-charge

Supply & fixing of 4" i/d MS clamp as per ISI make complete in all respect

Supply & fixing of 10" i/d MS clamp as per ISI make complete in all respect

Prov. & erection of C.I. Assembly 4"

Prov. & fixing Nylon mesh/ Jali

Supply & erection , testing and commissioing of submersible pump set with all accessories , confirming to ISI specification Lubi, CRI , Make complete in all respect having capacity 1700 LPM , 12 mtr Head three phase 7.50 HP motor

Supply, erection & testing & commissioning panel board of size 900 mm x 600 mm with angle iron legs, locking arrangement dully paints with powder coated anticorrosive material arrangement for 7.50 BHP electric pannel board complete wiring in all respect

Development of T/Well by Pumps & Machinery including cost of consumable store as per satisfaction of the Engineer-in-charge complete in all respect

Providing & fixing 10 Sq. mm 4 core alumunium wire ISI marked complete in all respect with accessories like thimble etc. complete in respects.

Provision for outdoor junction box suitable for 7.50 HP electric motor.

Excavation for pipelines running under pressure in trenches and pits, in open area, where disposal of surplus earth is done alongwith the alignment and restoration of unmetatlled or unpaved surface to its original condition in ordinary soil.((a) Without timbering and shoring upto 1.5 metress depth ) (HSR Item No.6.8)

Providing and fixing Cast Iron Double flanged sluice valves PN-1.6 marked with IS: 14846 including nuts & bolts marked with IS:1363, Rubber sheet marked with IS:638 etc., carriage loading unloading, stacking handling, Re-handling etc. complete in all respect to the satisfaction of Engineer-in-Charge (Makes AARKO, VENUS, LEADER, SI, PANJA, UPADHAY ((b) 100 mm i/d of valve) HSR Item No.28.10

Providing and fixing Cast Iron double flanged swing check type reflux (Non Return) values PN-1.6 marked with IS:5312 including nuts & bolts marked with IS: 1363, rubber sheet marked with IS: 638 etc., carriage, loading, unloading, stacking, handling, re-handling etc., complete in all respects to the satisfaction of Engineer-in-Charge (Makes AARKO, VENUS, LEADER, BIR, PANJA, UPADHAY)(b) 100 mm i/d of valve HSR Item No.28.10

Providing, lowering, laying, aligning, fixing in position and jointing all level / depths CI standard specials plain / flanged / socketed confirming to IS-13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.((i) Upto 300mm dia ) HSR Item No.

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN-6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including cost of HDPE Specials ,labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. . Rate Includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (i) 200 mm Outside Dia

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN-6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including cost of HDPE Specials ,labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. . Rate Includes cost of all specials like bends, tees required during laying of pipe line along required alignment.(iii) 250 mm Outside Dia

Earth work in excavation in foundations ,treaches etc.in all kinds of soils , not exceeding 2 metres depth including dressing of bottom and sides of trenches , stacking the excavated soils, clear from the edge of excavation and subsequent filling around masonary etc (HSR Item No. 6.6

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth.HSR Item No. 10.39

First Class brick laid in cement sand mortar 1:5 in foundation and plinth. HSR Item No. 11.3

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bituman 20/30 penetration at 1.65kg. HSR Item No. 10.114

First class brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. HSR Item No. 11.8

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs. HSR Item No.10.82

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs. HSR Item No. 10.86

Steel reinforcement TMT bars FE-500 EQR / FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all heights / depths / storeys / basements etc. HSR Item No.18.22

12 mm thick cement plaster 1:5 with cement rendering 1mm. HSR Item No. 15.6

10 mm thick cement plaster 1:4 HSR Item No. 15.52

Terracing considering of tiles 22.86cm x11.43cm x 3.81cm laid over 87.50mm mud filling on a layer of mud mortar for laying the tiles including two coats of bitumen laid hot at 1.65 kg. Per sqm on top of RCC slab including grouting with cement sand mortar 1:3 & surface to be left clean etc. HSR Item no.13.13

Cement pointing 1:2 deep variety on break & tile work HSR Item No.15.60

Base course of floors consisting of 100mm thick C.C. 1:8:16 and 100mm sand or stone filling. HSR Item No.14.1

Dry brick-edge paving sand grouted over 50 mm thick rammed brick aggregate 40 mm gauge. HSR Item No.14.21

Providing and embedding Asbestos cement Rain water pipe100 mm dia rain water pipe in cement mortar during masonary work. HSR Item No.13.37

White washing: (Three coats) HSR Item No.16.48

Dismentling with dry distemper (of approved manufacture ) two coats over one priming on new work HSR Item NO.16.54

Finishing walls with exterior decorative cement based paints, such as snowcam, Robbiacem etc. on new work, two coats to give an even shade HSR Item No. 16.61

Commercial hard wood such as hollock champ chikrassy and chaplash , etc. a) 35 mm thick ( 12 mm thick commercial plywood.) HSR Item No.17.30

Providing and fixing sliding bolts with nuts and screws etc, complete aluminium size 300mm x 16mm HSR Item NO.17.83

Cost of aluminium fittings complete for doors and window for single leaf shutter HSR Item No.17.72

Applying pink primer or aluminium coats on wood work including preparation of surface, knotting and stopping ,etc. HSR Item No.16.2

Painting two coats excluding priming coat with readymixed paint in all shades on new wood work HSR Item No.16.4

Wrought iron and mild steel ladders, grills, gratting frames, window guards, iron doors, openable or fixed stair case of parapet or any other type of railing, gates and tree guards etc. HSR Item No.18.12

Pressed steel sheet frames consisting of 2mm thick steal sheet of the specified section, including iron lugs ( hold fasts) , iron hings , confirming to PWD specifica- tions a) door and window frame of size 89mm x 50mm with 40mm wide single rebate .HSR Item NO.18.34

Earthing with G I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. as required. HSR Item NO.31.22

Extra for using salt and char coal/coke for pipe earth electrode as required.HSR Item NO.31.

Provision for electric connection released from H.V.P.N. Nearest HT line.

Provision for electric tranformer for 200 KVA suitable for running 15 No. pump set of 7.50 HP submersible motor.

Provision for electric tranformer for 125 KVA suitable for running 15 No. pump set of 7.50 HP submersible motor.

Provision for electric pole for supply of electric wire from transformer to pump house

Providing & fixing 50 Sq. mm 4 core alumunium wire ISI marked complete in all respect with accessories like thimble etc. complete in respects. (for 5 No. P.C.= 5 x 60)

Sunil Kumar Bansal