PROVN OF TOILET FACILITY WITH ALLIED INFRA FOR 79 MTN

Amount

Surface dressing n.exc 15cm deep in hard/dense soil. Complete all as specified and directed by Engr-In-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft and loose soil. Complete all as specified and directed by Engr-In-Charge.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation/cable etc. and getting out in hard/dense soil. Complete all as specified and directed by Engr-In-Charge.

M&L for cement concrete (1:4:8) type D-2 (40mm graded aggregate) in foundations, filling & mass concrete. Complete all as specified and directed by Engr-In-Charge.

M&L for RCC Design Mix M-25 ( 20 mm graded stone aggregate ) as in footing, raft and Plinth Beam etc. Complete all as specified and directed by Engr-In-Charge. (Note: A Satisfactory reports of design mix shall be submitted by the contractor from approved laboratory before starting of the concern work.)

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished surface. Complete all as specified and directed by Engr-In-Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floor and beams, etc in rough finished surface of concrete. Complete all as specified and directed by Engr-In-Charge.

M&L for RCC design mix M-25 as in beams, cantilevers, bressummers, lintels over 1.5m span. Complete all as specified and directed by Engr-In-Charge. (Note: A Satisfactory reports of design mix shall be submitted by the contractor from approved laboratory before starting of the concern work.)

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4. Complete all as specified and directed by Engr-In-Charge.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4. Complete all as specified and directed by Engr-In-Charge.

M&L for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surface in external surfaces with using integral water proofing compound.(Note: WPC will be paid and measured separately) Complete all as specified and directed by Engr-In-Charge.

M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surfaces finished surfaces even and smooth without using extra cement. Complete all as specified and directed by Engr-In-Charge.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement. Complete all as specified and directed by Engr-In-Charge.

Supply only integral water proofing compound (@ 3% weight of cement). Complete all as specified and directed by Engr-In-Charge.

S&F MS TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9mm dia. Complete all as specified and directed by Engr-In-Charge.

All as per item No. 15 above but using 8m dia bars. Complete all as specified and directed by Engr-In-Charge.

M&L for non-skid coloured ceramic tile 7 to 8mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:6). Complete all as specified and directed by Engr-In-Charge.

M/L for glazed ceramic coloured tiles ( 300x450 mm x7 mm) thick on vertical surfaces such as dado, skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement mortar over 15 mm thick plaster in CM (1:4). Complete all as specified and directed by Engr-In-Charge.

M&L for vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe). Complete all as specified and directed by Engr-In-Charge.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern low/high level white with inlet ball valve, float & handle including brackets, flush pipe complete fixed. Complete all as specified and directed by Engr-In-Charge.

S&F PVC Connection 15 mm bore with PTMT nuts of length 450mm. Complete all as specified and directed by Engr-In-Charge.

S&F (SWR) floor trap plain with grating jointed with solvent cement 75mm dia. Complete all as specified and directed by Engr-In-Charge.

S&F GI tubing medium grade galvanised with all fitting laid in trenches of fixed to walls or ceilling or laid in floors, bore of tube 15mm. Complete all as specified and directed by Engr-In-Charge.

S&F GI tubing medium grade galvanised with all fitting laid in trenches of fixed to walls or ceilling or laid in floors, bore of tube 20 mm bore. Complete all as specified and directed by Engr-In-Charge.

S&F Gun metal globe or gate valve with iron wheel head screwed both end for iron pipes and fixed of 15mm size. Complete all as specified and directed by Engr-In-Charge.

S&F Gun metal globe or gate valve with iron wheel head screwed both end for iron pipes and fixed of 20 mm size. Complete all as specified and directed by Engr-In-Charge.

S&F 15mm bore stop valves ISI marked cast copper alloy, chromium plated fancy type with long shank & cup (consealed type) screwed down for iron pipe. Complete all as specified and directed by Engr-In-Charge.

S&F 15mm bore bib taps ISI marked, cast copper alloy chromium plated fancy type, screwed down for iron pipes. Complete all as specified and directed by Engr-In-Charge.

M&L for lagging to pipes of sizes 15 mm used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed in snap pipe sections of density 144 Kg/cum confirming to IS-9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh . Complete all as specified and directed by Engr-In-Charge.

M&L for lagging to pipes of sizes 20 mm used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed in snap pipe sections of density 144 Kg/cum confirming to IS-9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh .Complete all as specified and directed by Engr-In-Charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. Complete all as specified and directed by Engr-In-Charge.

S&F roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290-0(Grade 250 E-165). Complete all as specified and directed by Engr-In-Charge.

M&L for preparing new steel surfaces any description exc 10 cm width/girth and applying two coats of synthetic enamelled paint any shade over a coat of red oxide or zinc crome primer. Complete all as specified and directed by Engr-In-Charge.

M&L for applying two coats of cement base paint over a coat of white wash on new surfaces of wall including preparation of surfaces. Complete all as specified and directed by Engr-In-Charge.

M&L for prepairing new plasterd surface of wall & applying three coats of white wash. Complete all as specified and directed by Engr-In-Charge.

S&F Pre- painted galvanume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Complete all as specified and directed by Engr-In-Charge.

S&F Plain, galvanised 0.63 mm thick , mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. Complete all as specified and directed by Engr-In-Charge.

S&F 0.80mm thick plain Galvanised mild steel sheeting, in ridges, hips, fascia boarding, valley gutters, drip and straight flashings (length and girth as fixed with grade of zinc coating fixed with new J-hooks/L-hooks/cranked hook bolts etc (Note: The sheets shall be conforming to IS make.) Complete all as specified and directed by Engr-In-Charge.

S&F vitreous china wash basin, white flat back, size 580x450mm inlcuding CP waste coupling and PVC connection etc. Complete all as specified and directed by Engr-In-Charge.

S&F vitreous China urinals flat black size of (465 X 355 X 265 mm) white with grating and union for discharge pipe, bowl type (back or corner wall type), compile with grating tete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing of automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Complete all as specified and directed by Engr-In-Charge.

Returning, filling in, including spreading, leveling, watering well ramming in layers n.exc 25cm. Complete all as specified and directed by Engr-In-Charge.

Removing excavated soil to distance n. exc 50m and depositing where directed at a level n.exc.1.5M above the starting point. Complete all as specified and directed by Engr-In-Charge.

S&F 15 mm dia CP pillar taps fancy type with capstan heads, chromium plated, screws down high pressure, with or without lettered "Hot' or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Complete all as specified and directed by Engr-In-Charge.

S&F steel ventilators with top hung shutters (dubble shutter insdie wire mesh and outside galss shutter) including hinges, steel peg stay & glazing bars complete. Complete all as specified and directed by Engr-In-Charge.

S&F vitreous china Urinal partition white of size 310 X 700 mm. Complete all as specified and directed by Engr-In-Charge.

M&L for PCC type B1 (1:2:4) 20 mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Complete all as specified and directed by Engr-In-Charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded agg as in plinth protecation finished even and smooth w/o using extra cement. Complete all as specified and directed by Engr-In-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough. Complete all as specified and directed by Engr-In-Charge.

M&L for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed of 2nd class Hard wood. Complete all as specified and directed by Engr-In-Charge.

S&F 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats and moulded bead is provided and planted round the panels (for each side). Complete all as specified and directed by Engr-In-Charge.

M&L for 30 mm thick, 1st class softwood , glazed & skeleton shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc. for windows and ventilators. Complete all as specified and directed by Engr-In-Charge.

M&L for preparing new wooden surfaces any description exc 10 cm width/girth and applying two coats of synthetic enamelled paint any shade over a coat of red oxide or zinc crome primer. Complete all as specified and directed by Engr-In-Charge.

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as shown in drawing. Complete all as specified and directed by Engr-In-Charge.

Supply & fixing factory made solid panel PVC door shuuter 30mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail & bottom rail on either side as as gap insert for top rail & bottom rail peneling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, jointed together with solvent cement, supplying and fixing in the frame at site. Complete all as specified and shown in drawings or directed by Engr-In-Charge.

S&F butt hinges medium weight cold rolled mild steel and fixed of 100 mm size. Complete all as specified and directed by Engr-In-Charge.

S&F Aluminium Alloy Sliding bolt 300mm long with hasp, staple (bolt type ) and fixing clips of sheet, cast or extruded section and fixing bolts etc. Complete all as specified and directed by Engr-In-Charge.

S&F aluminium anodised barrel tower bolts of extruded section 200mm etc. Complete all as specified and directed by Engr-In-Charge.

S & F aluminium alloys handles fabricated type anodised 150mm long. Complete all as specified and directed by Engr-In-Charge.

S&F granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick plaster in CM (1:4). Complete all as specified and directed by Engr-In-Charge.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms). Complete all as specified and directed by Engr-In-Charge.

S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms). Complete all as specified and directed by Engr-In-Charge.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms). Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR ) pipes 110mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor. Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR ) pipes 75mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor. Complete all as specified and directed by Engr-In-Charge.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore of pipe. Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) bends 75mm dia provided with access door complete. Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) bends 110mm dia provided with access door complete . Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) junction single Tee 100mm dia fixed complete. Complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) vent cowl 100mm dia fixed complete. Complete all as specified and directed by Engr-In-Charge.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 20 mm dia Ball brass valves,high pressure,with polythene float and flynut complete all as specified in SSR Part I of size 1000 ltrs. Complete all as specified and directed by Engr-In-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in drain concrete etc. Complete all as specified and directed by Engr-In-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped ends etc, Complete all as specified and directed by Engr-In-Charge.

Surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard soil and getting out, Complete all as specified and directed by Engr-In-Charge.

M&L for hardcore (broken stone of guage n exc. 63 mm depositing spreed and levelled in layers n .exc 15 cm thick) watering and ramming to a true. Complete all as specified and directed by Engr-In-Charge.

M&L for 75 mm thick PCC (1:4:8) D2 types using 40mm graded aggregate as in sub base of path. Complete all as specified and directed by Engr-In-Charge.

M&L for cement concrete interlocking paver block 60 mm thick M-35 with grey cement sand pigment glossy finished,laid and jointed. Complete all as specified and directed by Engr-In-Charge.

M&L for sand cushioning under floor including watering and consolidation. Complete all as specified and directed by Engr-In-Charge.

M&L for RCC pipes 150 mm internal dia class NP3 laid in trenches and jointed. Complete all as specified and directed by Engr-In-Charge.

M&Lfor concrete bed in cement concrete, 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) to SGSW drain pipe of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested, Complete all as specified and directed by Engr-In-Charge.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole covers including necessary formwork required including setting in cement mortar (1:4), complete, Complete all as specified and directed by Engr-In-Charge.

M&L for walling of random rubble masonry uncoursed, well bonded beded and solidly hearted built in cement mortar 1:4, Complete all as specified and directed by Engr-In-Charge.

Extra over hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge n.exc 40mm. Complete all as specified and directed by Engr-In-Charge.

M&L for reinforced concrete pipe class NP-3 laid and fixing complete of 300 mm dia. Complete all as specified and directed by Engr-In-Charge.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe size 300 mm after they are laid and tested using PCC (1:4:8) using 20 mm graded aggregate. Complete all as specified and directed by Engr-In-Charge.

Construction of septic tank for 40 users, including excavation in hard/dense soil, foundation in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) brick masonry in CM 1:4, RCC (M-30 design Mix) slab including cast iron manhole cover having 6 mm plate embedded all around with angle iron frame vent shaft etc, complete all as specified and shown on drawings or directed by Engr-In-Charge. (Note: A Satisfactory reports of design mix shall be submitted by the contractor from approved laboratory before starting of the concern work.)

Construction of LLDPE Septic Tank designed to carry out sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent Shaft, connection etc, complete for 20 users. Complete all as specified and directed by Engr-In-Charge.

Construction of Soakage well 1.8m internal dia and 3.00 m depth including excavation in hard/dense soil PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in footing stone honey comb / solid masonary in cement mortar 1:4 RCC (M-30 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil. Complete all as specified and directed by Engr-In-Charge. (Note: A Satisfactory reports of design mix shall be submitted by the contractor from approved laboratory before starting of the concern work.)

E&M Portion:-Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sq mm 2 Core. Complete all as specified and directed by Engr-In-Charge.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of security lights cables and getting out in soft/loose soil Complete all as specified and directed by Engr-In-Charge.

Supply and spreading clean dry sand in trenches for cushioning all as specified, 230 mm thick,80mm before laying of cable and 150mm than after for cable protection Complete all as specified and directed by Engr-In-Charge. (Note :The punned down thickness shall only be measured and paid.)

Supply and laying sub class 'B' bricks laid across the cable for cable protection in trenches Complete all as specified and directed by Engr-In-Charge.

Supply & Fixing GI tubing, medium grade 40 mm for cable protection passing through road or in trenches/floor/duct.Make: Jindal/Tata/Prakash. Complete all as specified and directed by Engr-In-Charge.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including of size 1.5 Sqmm as earth continuity conductor for light point. Complete all as specified and directed by Engr-In-Charge.

S&F switch piano, flush type single pole, one way 5/6 Amp. Complete all as specified and directed by Engr-In-Charge.

S&F ultra modern, energy saving, surface mounted,decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 W LED. Complete all as specified and directed by Engr-In-Charge. Make : Havells/Bajaj/Philips/CG.

Supply and fixing endura linear leo surface and mounted LED tube light fitting 20 W, four feet, extruded aluminium housing provided for efficient heat dissiption with polycarbonate diffuser and integerated electronic driver complete all as specified and as directed by Engr-in-Charge. Make Havells/Bajaj/Philips/CG

Supply and fixing ceiling rose 3 terminal/PVC/Polycarbonate, isolated body. Complete all as specified and directed by Engr-In-Charge.

S&F LED lamp 10 W Complete all as specified and directed by Engr-In-Charge. Make : Havells Cat Part No LHLDERUEML8X010/Philips/Bajaj/Crompton

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. Complete all as specified and directed by Engr-In-Charge. Make : Anchor/Cona/Bajaj

S&F sheet metal enclosure for 4 way DBs when MCB to be used single phase 240 Volts, single door. Complete all as specified and directed by Engr-In-Charge.

S&F MCB single pole of capacities 6 to 32 amp, 240 volts. Complete all as specified and directed by Engr-In-Charge.

S&F MCB single pole and neutral of capacities 32 amp, 240 volts. Complete all as specified and directed by Engr-In-Charge.

Supply and fixing ventilating exhaust fan 200 mm sweep 230 volts, plastic type AC connecting up including provision of cable from ceiling rose/connector to fan. Complete all as specified and directed by Engr-In-Charge.

Supply and fixing GI tubing, 25 mm bore, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floor, fixed on walls with and providing clamps etc Complete all as specified and directed by Engr-In-Charge.

S&Fstop valves/gate/globe valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete suitable for 25 mm dia bore complete all as specified and directed by Engineer-in-Charge

Cutting of existing GI pipe line of required size and inseting new pipe line including all fittings. Complete all as specified and directed by Engineer-in-Charge

Supply and install storage heater type of capacity 50 Ltrs BEE 5 star rated, 230 volts, AC 50 Hz including PVC connection of size 15 mm dia & 900 mm long for hot water and cold water complete with both end Complete all as specified and directed by Engineer-in-Charge Make : Havells Cat part No GHWAMESWH050 or equivalent in Greaves/Usha as approved by GE.

M&L for point wiring with 2.5 Sqmm, PVC insulated, FRLS, multistrandard copper conductor cable, 1100 volts grade, conforming to IS : 694 for 6 Pin 15 Amp switch socket combination on independent board with 2.5 Sqmm PVC insulated copper cable as earth wire, in and incl PVC casing and capping will all accessories and terminated in PVC moulded box, duly earthed FRLS multistranded green in colour for earth continuity conductor cable complete all as specified and directed by Engr-in-Charge Make:Polycab/Havells/Finolex.

S&F sheet metal enclosures with socket plug top and MCBs having single pole and nutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240V. Complete all as specified and directed by Engineer-in-Charge

S&F bip taps, cast copper alloy with crutch handle screwed down screwed for iron pipe or for brass ferrule and fixed for 20 mm dia. Complete all as specified and directed by Engineer-in-Charge Make : Prayag/Neta/GEM

S&F for stop valves cast copper alloy screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions and fixed for fancy type chromium plated for bore dia of 20 mm all as specified and directed by Engineer-in-Charge. Make : Bir/Zolota/Leader

M/S DALJIT SINGH TULLA

M/s DUTTA BUILDERS

M/S GHULAM RASOOL LONE AND SONS