Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹17.5 L
EMD Value
₹35,100
Closing Date
8 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE I CG VIZAG
GE (I) (CG) VIZAG Military Engineer Services CGWO Building C/o Fleet Mail Office Visakhapatnam-530 014
REPAIR REPLACEMENT AND MAINTENANCE OF STP AND RO PLANT AT CG KRISHNAPATNAM UNDER GE (I) (CG) VIZAG
2026_MES_799028_1
GE(I)CG/VIZ/TOKEN/77 OF 2026-2027
Open Tender
Civil Works
Works
120 days
Krishnapatnam
As per NIT
8 documents required · 8 mandatory
₹500
GE (I) (CG) Vizag
₹35,100
Yes
17 Nov 2026
17 Nov 2026
10 Dec 2026
17 Nov 2026
8 Dec 2026
1 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for dewatering, cleaning and disinfection of equalization tank of 60 KLD Sewage Treatment Plant (STP) including removal of sewage water, sludge, and solid waste using suitable sludge pumps or industrial vacuum machines. The internal surfaces of the tank shall be thoroughly scrubbed using steel wire brushes and cleaned with high-pressure water jet to remove all dirt, algae, moss, grease, and biological growth adhered to the tank surface includes careful dismantling, inspection, repair, and re-fixing of disc-type air diffusers installed at the bottom of the equalization tank, including cleaning of diffuser membranes, checking for cracks or clogging, replacing damaged parts, tightening/realignment of air piping connections, and ensuring proper functioning after reinstallation. All necessary tools, replacement parts and technical labour shall be included in the quoted rate. After cleaning, the complete internal surface shall be sterilized using bleaching powder or approved equivalent disinfectant in appropriate concentration to ensure hygienic and safe conditions. The work includes provision of all tools, plants, labour, materials, safety equipment (such as gloves, masks, boots, safety harnesses, etc.), and disposal of all removed waste and sludge to a location as indicated by the Engineer-in-Charge complete all as specified and directed.
Note: If the work is not found satisfactory by the Engineer-in-Charge, it shall be re-executed at no extra cost to the department. The entire responsibility for the safety of laborers during confined space entry and sludge handling shall rest with the contractor. | 3 | EACH JOB | 100 | ₹300 |
| 2 | All as per item No. 1.00 above but for 20 KLD Sewage Treatment Plant (STP) | 3 | EACH JOB | 100 | ₹300 |
| 3 | M & L for cleaning of Treated water tank of 60KDL STP by pumping out the accumulated water at the bottom and removing the complete silt from the sump and depositing and levelling as directed and the cleaning the sump with bleaching powder and wire bursh after scrapping the walls and bottom of the sump completely without disturbing the water supply to the area inlcuding painting the details such as sump capacity, date of cleaning on the sump wall complete all as specified and directed .
Note: Pump to empty the water from bottom of sump and any other material/ equipment required shall arranged by contractor. Cost of same shall deemed to be in quoted rate. | 1 | EACH JOB | 100 | ₹100 |
| 4 | All as per item No. 1.00 above but for 20 KLD Sewage Treatment Plant (STP) | 1 | EACH JOB | 100 | ₹100 |
| 5 | M&L for complete servicing of 5 HP air blower & pump operating at speed 1160 RPM and pressure 0.4 kg/cm², including dismantling, cleaning of casing, impellers, and shaft using suitable cleaning agents, thorough inspection of internal components, tightening of foundation bolts, alignment check between motor and blower shaft, replacement of air filters & Bearing, greasing of bearings with appropriate grade lubricant, and replacement & adjustment of drive belt. The work shall also include draining of used gear oil from blower gearbox, flushing, and refilling with fresh Oil of sutaible Grade incl oil seal. After servicing, the blower & pump shall be test-run under load to check vibration, pressure buildup, RPM, noise, and temperature, and the unit shall be handed over in proper working condition. The rate includes cost of labour, tools, cleaning materials, gear oil, greases, safety gear, and minor consumables (nuts, bolts, oil, bearing, filter media etc.) complete all as specified and directed. | 5 | EACH JOB | 100 | ₹500 |
| 6 | M&L for repairing of STP starter panel board complete all as specified and directed. | 1 | EACH JOB | 100 | ₹100 |
| 7 | Comprehensive maintenance of WTP and RO plant services of 15 KLD & 500 LPH capacity complete system installed at ICGS Krishnapatnam in every visit of service engineer following activities to be done:-
(a) Water analysis test to be carried out and test report shall be submitted for record.
(b) Observation and record of of RO plant parameters like feed pressure, reject pressure, permit flow etc and to be submitted for record.
(c) Any problem in a system, engineer must address issue and suggest the necessary corrected measure.
(Note: (i) The contractor shall visit the site and inspect the plant before quoting the rate.
(ii) A Service Engineer shall report to the site within 4-8 working hours from time of complain lodging.) | 4 | PER MONTH | 100 | ₹400 |
| 8 | M & L for dismantling / taking down high pressure pump upto 20 HP after taking down all electrical connection etc including removing of pump set, transportation to the workshop, rewinding of the motor with appropriate gauge copper wire, thorough insulation testing, reassembly, and refixing of the pump with proper alignment and electrical connections complete all as specified and directed | 2 | EACH JOB | 107 | ₹214 |
| 9 | All as per item No. 8.00 above but high pressure pump upto 05 HP | 2 | EACH JOB | 107 | ₹214 |
| 10 | S & F in Repairing, servicing and renovation of existing RO Plant Control Panel, including dismantling, cleaning and servicing of internal electrical components, checking and replacement of defective MCCBs, MCBs, magnetic contactors, auxiliary relays, timer relays, control switches, push buttons, indicating lamps, digital meters, selector switches, emergency stop switches, terminal blocks, control wiring and interconnecting cables, including necessary rewiring, cable dressing, tightening of connections, replacement of defective components, removal of rust, surface preparation and painting of panel enclosure, testing and commissioning of the complete control panel for satisfactory operation, complete all as specified and directed. | 1 | EACH JOB | 108 | ₹108 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
8546STP77T.pdf
Tender Documents • 1.58 MB
BOQ_896427.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .