CERTAIN REPAIR MAINTENANCE TO BLDG OF SECTION HOSPITAL MDC TA BN DSC COY AND BAND LINE UNDER AGE BR-II AT IMA DEHRADUN

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

PCC 1:4:8 type E-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc including demolition of existing old concrete complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed

100mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in hardstanding including necessary formwork and spike rolling or making impression of expanded metal while the concrete is green etc and including demolition of existing old cement concrete complete all as specified and directed

Rubber moulded chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete including dismantling of existing tiles of any description complete all as specified and directed

Granite stone of any colour (of any type) 20mm thick machine cut, in floors bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing including dismantling of existing granite stone complete all as specified and directed

Udaipur green marble work, 18 to 20 mm thick (table rubbed and polished) as in cooking platform with and including 20 mm thick cement screed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges including dismantling of existing marbal work complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situtions complete all as directed.

Machine cut Kota stone slab flooring 20-25 mm thick laid over and including 20mm screed bed in CM 1:4 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish including dismantling of the existing kota stone flooring of any description etc complete all as specified and directed

Machine cut kota stone slab mirror polished 20-22mm thick as in skirting/dado over 10mm th rendering in cm 1:4 & jointed with grey cement slurry mixed with pigment to match the shade including dismantling of the existing kota stone skirting/dado of any description etc complete all as specified and directed

Vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

Vitrified ceramic coloured tiles 10 mm thick (square/ rect) polished, in verticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 including dismantling of existing tiling complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 300x450 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 x 200 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough including demolition of old existing concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of cement primer complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down shutters of any description nex 1 Sqm each complete all as specified and directed

Taking down shutters of any description.exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each ccomplete all as specified and directed

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded Drg No TD088 sh 1/17 to 17/17 complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded Drg No TD088 sh 1/17 to 17/17 complete all as specified and directed.

Steel ventilators with top hung shutter including hinges, steel peg stay Drg No TD088 sh 1/17 to 17/17 complete all as specified and directed

35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

30mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as directed.

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed

150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and directed.

150 mm long extruded aluminium alloy handles complete all as directed

300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples fixed complete all as specified and directed

Hacking out old broken glass pane (any size thickness and description) from wooden frames or steel frame complete all as specified and directed

3mm thick sheet glass ordinary quality in square n exc 0.50 sqm each pane glazed with oil putty or fixed with wooden bead complete all as specified and directed

5.0 mmm thick sheet glass ordinary quality in square n exc 0.50 sqm each pane glazed with oil putty or fixed with complete all as specified and directed

Figured glass type, pin head type and glazing with oil putty in squares n exv .5 sq in each pane complete all as specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

0.80mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old sheets in ridges, hips valley gutter any pattern etc complete all as specified and directed

0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L or J type hooks and washer as in roof, wall etc with grade of zinc coating 120 complete including dismantling existing sheets complete all as specified and directed.

6mm thick cement corrugated or semi corrugated sheet in roofs fixed in repair with L or J type bolt including dismantling existing sheets complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based tile profile corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding ridges to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

2nd class hardwood as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed

4mm thick cement building boards fixed in ceiling to timber framework with screws including all accessaries and including dismantling existing boards any thickness including cover fillets with and including preparation of new surface of cement board and applying three coat of white wash etc complete all as specified and directed.

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI trap, lime concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repair complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400mm including bracket, 32mm brass CP waste fitting, PVC waste pipe fixed in repair complete all as specified and directed.

15mm dia pillar taps, rocket type with aerator fixed in repair complete all as specified and directed. Make- Jaguar Cat part No MQT-507 or equivalent of Cera/Hindware

15mm dia pillar taps, surper delux with aerator fixed in repair complete all as specified and directed. Make- Jaguar Cat part No MQT-508 or equivalent of Cera/Hindware

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-512 or equivalent of Cera/Hindware

15mm bore stop valve chromium plated male end screwed both end for iron pipe fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-513A or equivalent of cera/Hindware

PTMT grating 100mm dia with hole for waste pipe complete all as specified and directed..

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed

Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:6 complete including demolition of existing RCC work etc complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of BOQ)

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed

PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints laid in trenches, fixed to walls/floors fixed in repair complete all as specified and directed.

PVC (SWR) 75mm dia pipes, single socketed, in any length with rubber ring joints laid in trenches, fixed to walls/floors fixed in repair complete all as specified and directed.

PVC (SWR) bends 110 mm dia any radius fixed in repair complete all as specified and directed.

PVC (SWR) bends 75 mm dia any radius fixed in repair complete all as specified and directed.

PVC (SWR) junction single (Tee) 75mm bore equal or unequal with access door complete all as specified and directed.

PVC (SWR) junction single (Tee) 110mm bore equal or unequal with access door complete all as specified and directed.

PVC (SWR) vent cowl 75mm bore fixed in repair complete all as specified and directed.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as specified and directed.

Complete removal of existing treatment on walls, including preparation and applying wall putty 1.5 mm thick and finally applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as directed.

Solid PVC wall lining consisting of 5 mm thick wood grain / coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawings in SSR in repair, complete all as specified and directed.

5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing in repair complete all as specified and directed

PCC (1:3:6) type B-1 (using 20mm graded stone agg) as in roof kerbs, mud stops, coping, kneelers, apex stone, bed plates, kerbs roofrounded or chamfered on edges complete including demolition of existing cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

PCC (1:2:4) type B0 (using 12.5mm graded stone agg) as in roof kerbs, mud stops, coping, kneelers, apex stone, bed plates, kerbs roofrounded or chamfered on edges complete including demolition of existing cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

50mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof padding and finishing the concrete surface fair and even complete all as specified and directed.

Screed bed 10mm thick in CM 1:4 finished even and smooth without using extra cement on roof mixed with water proofing compound as per manufacture instruction (WPC shall be measure and paid separaterly) etc complete all as directed.

Supply only water proofing compound complete all as specified and directed.

A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment from RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance n.exc 500m complete all as directed. Note:- The work shall be executed through authorised applicator approved by GE.

Powder coated aluminium anodised door with frame and shutter, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm fixed with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos including taking down existing doors etc and making good of wall complete all as directed.

Powder coated aluminium anodised windows/ventilators with side hung shutter and frame made with aluminium section shall be of size:- Frame 65 x 40mm x 1.98mm thick, Top/bottom and side style/rails of Shutter - 44 x 47mm x 1.98mm thick, rubber gasket, aluminium beading. Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and including taking down existing and making good of wall surface with matching to existing surfaces complete all as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed in repairs complete all as specified and directed.

5.5mm thick frosted glass fixed in aluminium door/window complete all as specified and directed.

75mm bore cost iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) fixed in repair complete all as specified and directed

15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gm) fixed in repair complete all as specified and directed.

20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gm) fixed in repair complete all as specified and directed

Vitreous china bowl urinal flate back size 430 x 370 x 340 mm with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1.2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixed in repair complete all as specified and directed

Vitreous china urinal, half stall type white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1.2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixed in repair complete all as specified and directed

Vitreous china urinal, full stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1.2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixed in repair complete all as specified and directed.

Push cock with wall flange size 25mm with plain KNOB complete all as specified and directed. Make- Jaguar ESSCO Cat part No- MVF-553 or equivalent of Cera/Hindware

Grinding of existing mozaic / kota stone flooring including mirror polishing complete all as specified and directed.

Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed

Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed

40mm thick PCC type B-1 1:2:4 (with using 20mm graded stone aggregate) as in flooring and finishing the surfaces even and smooth using extra cement complete including demolition of concrete complete all as specified and directed

Glass dividing strips 3mm thick and 38mm wide inserted in position and confirming to design complete all as specified and directed.

Overhead Shower 125 mm dia Round shape single Flow (ABS body chrome plated with Gray face plate) with Rubit cleaning system complete all as specifie and directed. Make- Jaguar ESSCO Cat part No- EOS-542A or equivalent of Cera/Hindware

Clean the surface of roofs, walls, corner of window and door frame, slab and similar works by removing dust, loose particles, oil & grease to enusure the surface is clean, dry and sound and spread smart care hybrid polyurethan sealant in joint, cracks, and spread at edges to ensure adhension of sealant at both edges of joint/crack and then level the sealant with spatula/putty knife and finally finishing by tooling the surface with a concave shape with shop water complete all as per manufacturer instrcution and as directed. Make:- Asian paint product code no 5428 or equivelent of STP BERGER/Shalimar/Pidilite Industries Ltd/Structural Water Proofing Co Pvt Ltd/ Apar Infotech Pvt Ltd.

All as per per item No 132 here in before but sealant filling spreaded to cover holes of L/J hooks average dia 6-8 mm on CGI/PGI/Steel/AC roof sheet complete all as specified and directed. Make:- Asian paint product code no 5428 or equivelent of STP BERGER/Shalimar/Pidilite Industries Ltd/Structural Water Proofing Co Pvt Ltd/ Apar Infotech Pvt Ltd.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners brass handles etc as specified in clause 10.24 of SSR Part -I errected in position and securing runners with holdfasts and brackets including taking down existing steel gate complete all as specified and directed.

Sharda Enterprises

Aggrawal Builders and Furnishers

Aron Water Proofing and Pest Control

M/s Vinod Singh Negi