Providing, Installation, Testing and Commissioning of multi stage Horizontal centrifugal pump 5000 GPH x 250 MH along with allied electro-mech equipment at Pumping station Bhatian.

Amount

Providing Installation Testing and Commissioning of HCP 5000GPH x 250Mtr Head.Providing& installation of Horizontal pump set 5000GPH X 250 Mtr Head along with suitable Induction motor & base frame. The pumping machinery should confirm to relevant ISO standard with all latest amendment. The equipment should also be accompanied with test certificate and performance curve. Carriage/ shifting of pumping machinery up to site of work in the pump room at pumping station Bhatian By mechanical transportation and head load including loading unloading charges with the help of manual labour and tools /tackles. Laying of RCC foundation block for HCP set by way of excavation of trench in the pump room as per the size of HCP set and disposal of exuviated waste material outside premises with the help of manual labour. The job includes fabrication, welding, laying of steel mesh made from 10mm tar steel placed horizontally, vertically, and diagonally at equal distance including form work. Placing/ levelling the base frame with the help of levelling tool. Fabrication/fixing of foundation/anchor bolts. Laying of foundation block of RCC in the ratio (1:1.5:3) cement, sand, bajri mix sufficiently elevated with respect to floor level. The entire block to be laid in such a way that it can dump all types of mechanical vibrations created by dynamic load of HCP set. Fastening the foundation bolts and curing properly. The job includes cost of cement, sand, Bajri, steel &labour charges .Mechanical Installation of HCP set 5000GPH X 250MHby way placing pump & motor on base frame & proper Coupling, levelling with steel shims, tools/ tackles etc. Fabrication/Laying of Suction/ delivery line of HCP set by way of providing/cutting GI pipe 80mm Ø (Medium). in required lengths as per alignment / layout conditions of suction /delivery lines at site , providing/ fitting of M.S. flanges as per size of suction/delivery head flanges of pump with an expender nipple 3x3 inches for delivery side. Providing/ fitting of heavy duty Sluice valves 80mm dia.- 02 no’s with flanges as per size of valves (one number each at appropriate place at suction and delivery line of HCP set). Providing/ fitting of heavy duty reflex valve of 80mm dia.-01 no with flanges as per the size of valves at delivery side. Interconnecting the suction line to the sump tank and delivery line to the rising main. The Job includes providing/fitting of M.S bends, flanges, nuts/ bolts, washers etc as per site requirement. Complete welding of suction/delivery lines in precise manner with good quality electrodes to make leak proof joints. Both suction /delivery lines should be supported independently at appropriate locations so that stress/strain will not be transmitted to the pumping set during operation of machinery. Electrical Installation by way of providing/fitting of 200 amp. 415 volt, 3 phase Main Switch on panel board by way of drilling holes providing of nuts, bolts washers etc. Providing fitting of aluminium cable of 185mm sq armoured 3.5 core from LT poles to Main Switch in four leads with neutral with proper thimbling and insulation. P/F of 60 HP star delta starter along with T-oil. Providing / fitting of 16 mm square copper for making of connection from starter to motor with proper thimbling and insulation. Checking continuity of electrical circuit with proper thimbling /insulation of complete electrical connections. The complete job includes cost of material, carriage/shifting charges of material, transportation charges, welding charges, skilled/semi-skilled labour charges and hire charges of tools/tackles at site of work. (Complete job)

M/s RK Elect. Mech. Engg and fabrication works

M/S FASTTRACK ENGINEERS