Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.1 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.5 Cr+₹57.2 L (59.5%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹2.2 Cr+₹1.2 Cr (127.8%)Admitted-Finance 3 18 HIG BAHADURPUR HOUSING COLONY PATNA BIHAR 800026 | PATNA | BIHAR | 800026 | L3 | Admitted-Finance | |
| 4 | Rejected-Technical RC 9 SECOND FLOOR BESIDE BIHARILAL CHOUDHARY SHOWROOM NEAR IDBI BANK BARTAND HOUSING COLONY DHANBAD DHANBAD JHARKHAND 826001 | DHANBAD | JHARKHAND | 826001 | - | Rejected-Technical Technically and Commercially n | |
| 5 | Rejected-Technical | - | Rejected-Technical Technically and Commercially not approved |
| Sl No | Description | Qty | Unit | Apex India L1 | FILM CITY L2 | ASAP IMPACT PVT LTD L3 |
|---|---|---|---|---|---|---|
| 1.00Laying and Jointing PVC Pipe. Heading | ||||||
| 1.10 | Boiling water bath with lids having 8 - 12 | 1 | Nos | - | 13,000 ₹13,000 | 10,600 ₹10,600 Lowest |
| 2.00 | Balance semi micro | 1 | Nos | - | - | - |
| 3.00 | Balance micro | 1 | Nos | - | - | - |
| 4.00 | Vortex mixers | 1 | Nos | - | 9,000 ₹9,000 | 4,990 ₹4,990 Lowest |
| 5.00 | Constant temperature water bath | 1 | Nos | - | - | - |
| 6.00 | Magnetic stirrer | 1 | Nos | - | 7,000 ₹7,000 | 4,990 ₹4,990 Lowest |
| 7.00 | Calorimeters | 1 | Nos | - | 9,900 ₹9,900 | 7,990 ₹7,990 Lowest |
| 8.00 | Stop Watch | 1 | Nos | - | - | 450 ₹450 Lowest |
| 9.00 | Spirit Lamp | 1 | Nos | - | - | 99 ₹99 Lowest |
Tender Value
₹1.3 Cr
EMD Value
₹2.5 L
Closing Date
19 Jan 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Principal,SNMMC,Dhanbad
Principal,SNMMC,PO- Koyla Nagar,BCCL Township,Dhanbad,Jharkhand
Purchase Supply of Machine Equipment
2023_PMC_64631_4
2417/SNMMC
Open Tender
Miscellaneous Goods
Item Rate
30 days
Principal SNMMC
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹2.5 L
Yes
27 Mar 2023
3 Jan 2023
20 Jan 2023
3 Jan 2023
19 Jan 2023
7 Jan 2023
4 Jan 2023 - 18 Jan 2023
Amount
Laying and Jointing PVC Pipe. Heading
Boiling water bath with lids having 8 - 12
Balance semi micro
Balance micro
Vortex mixers
Constant temperature water bath
Magnetic stirrer
Calorimeters
Stop Watch
Spirit Lamp
Samplers (auto pipettes) different volume range
BP Blade surgical
Microtome (Leica 818) cutting blade
Paraffin embedding wax bath
Tissue floating bath
Hot plate
Fire extinguisher 2kg
Fire extinguisher 4kg
Monocular microscope
Distilled water plant
Anatomical Charts
Anatomical Diagrams
Plastic tank for storing soft & dissected parts
X- ray view box (LED)
X-ray view box 4 plate
Smart board
Dead body Refrigerator
Large bath tub for Cadaver (L -152 cm)
Drawer Cabinet
Treadmill Test (TMT) Machine
Airway Management Mannequins Adult
Male Catheterisation Mannequins
Nasogastric Tube Mannequins
Centrifuge Machine 12 tube brushless digital
Mannequins for IV injection basic model
Mannequins for IN injection
Mannequins for pleural aspirator
Mannequins for SC injection
Nervous System:The model should be minimum half life size. This should be a schematic representation of the Central and Peripheral Nervous system, including of spinal nerves radiated from central nervous system to other parts of the body. Display of positions minimum 39. Made of HSP Resin on a firm base.
Brain:The model should be suitable for understanding the correlation of brain parts. External features of the brain, cerebral hemisphere, brain stem and cerebellum. It should be dissectible in atleast 9 parts.
Heart:The model should be 3 times larger than life size to show external feature and internal structures of heart and it’s relation between large blood vessels. Should be dissectible at least into 5 parts. Made of pvc plastic material.
Pumping Heart: It should be 3D working plastic heart model with clear chambers. Should have squeeze bulb to pump simulation blood through clear heart chambers.
Respiratory system: It should be well illustrated and informative, upper half displaying nasal cavity, oral cavity, trachea, bronchia, bronchial tree in pulmonary lobe, right and left lungs cut open, heart in situ, pulmonary blood vessels and diaphragm with muscles attached to it. 24 positions marked. In lower half of the model should display enlarged pulmonary acinus displaying pulmonary alveoli, alveoli saccules, bronchial artery and veins and alveolar capillary network. Positions should be marked. It’s size should be atleast 40x80cm, made of HSP resin and mounted on a sturdy base.
Gastrointestinal Tract: The model of human digestive system should be in median section dissectible into 3 parts. Duodenum, caecum and rectum opened, rectum unfolded. Transverse colon and front half of the stomach should be removable. The oral cavity, pharynx, esophagus, stomach, liver with gall bladder pancreas, GI tract and spleen should be displayed. It’s size should be atleast of 40x80cm life size, made of HSP resin, mounted on a sturdy frame.
Kidney Macrostructure: The model should be detailed life size model featuring Kidney, adrenal gland, renal and adrenal vessels and upper portion of the ureter. It should be dissectible into 2 parts to reveal the cortex medulla, cortex vessels and renal pelvis. Model can be removed frm the stand for instruction and education.
Kidney Microstructure: The model should be 3D to show 5 sides view of structures in details of kidney section, parenchyma of kidney and nephron, renal corpuscle and arrociated structures, loop of henle and associated structures. It’s size should be atleast 30x20x24cm, atleast 45 parts labeled and made of HSP resin
Haemoglobine (Hb%) Analyser cuvette system o/p 25mm
Video Laryngoscope (CE certified USFDA approved, Blade curvature 85° to 90°)
Fibre Optic Bronchoscope with HD Screen & Eye piece (Outer dia. less than 5.2mm and more than 4.5mm, >160° tip movement in all 4 directions, with suction channel, ventilation channel and light source)
Fibre Optic Bronchoscope with Eye piece (Outer dia. less than 3.2mm, with suction channel, ventilation channel and light source, >160° tip movement in all 4 directions, CE certified USFDA approved)
Epidural Full Set Latex free continuous epidural anaesthesia kit containing G18/G16 epidural touhy needle with large crystal clear grooved transparent hub & epidural catheter of G20 /G19 with catheter connector. Epidural catheter in the kit made of 2 layers - inner layer of Polyamide & outer layer of Polyurethane.
Single Lumen Central Venous Catheters 16G polyurethane, length 15 cm, Seldinger Needle 18G, dilator, scalpel, Guidewire and connector to prevent back flow and air embolism, ECG lead.
Double lumen Central Venous Catheter 7F (16G/16 G), polyurethane, length 15/20 cm, 18 G valve needle having side port dilator, scalpel Guidewire and connector to prevent back flow and air embolism, ECG lead.
Triple lumen Central Venous Catheter 7F (16G/18G/18G) polyurethane, length 15/20 cm, 18 G valve needle having side port dilator, scalpel, Guidewire and connector to prevent back flow and air embolism, ECG lead.
Suction with pedal double chamber
Electronic Suction with pedal double chamber
Fully Automated ELISA Processor Fully Automated ELISA Processor Fully Automated ELISA processor for processing up to 4 microplates of ELISA. Instrument should not have any startup time after switching on. Should be Capable of performing sample dilution, sample pipetting, reagent pipetting, washing and reading, etc. Should have 4 independent incubators with optional facility to cover micro plates. The equipment should have four independent incubators with inbuilt shaking facility. The equipment should have programmable shake time. Should have up to 120 samples loading capacity along with more than 288 pinching tip loading facility. Reading method: Single/Mal method Standard filters: 405 nm, 450nm, 492nm, 620nm with two optional filter positions. Optical measurement range should be 0.00 - 4.0 OD Software should provide flexibility to use Control and Calibrator positions for sample loading. Software should be Windows based software for easy handling. Software should allow retrieving the older calibration curves and can be readjusted according to new values one or two calibrators. The equipment should have two syringes i.e., two needles for faster pinching of samples and reagents. The equipment should be capable of processing three steps simultaneously like washing a micro plate, reading a micro pate and at the same time pinching reagents/ samples into another micro plate The software should provide flexibility to use small tips for samples, large tips or reagents or similar tips for both samples and reagents Pipette tips should be disposable& non-carbonated non-conductive type Washer unit should have 16 needles, 8 needles for dispensing and 8 needles for aspirating wash buffer with level sensor facility Software should be capable of bi-directional host data interface, facilitating the creation of new work list Software should have an option of automatic creation of LJ graphs for QC samples. There should be provision for demonstration of equipment before final purchase if required. Should be 2KVA online UPS with battery backup 45minutes, Complete PC set, All accessories and startup reagents. 3 year warranty of Machine, UPS and Battery must be written on Affidavit, Brochure should be attached.
Blood & Body Sterile Fluid Culture Instrument The system should be a fully automated, walk away system capable of culture and detection of Bacteria & fungi from blood and sterile body fluids. The same system should be capable of mycobacterium culture. Should have capacity to hold at least 120 bottles at a time. The capacity should be upgradable. The system should continuously monitor the samples for growth and report it as and when it occurs. System is based on Colorimetric/ fluorescence technology for interpretation of results. The culture media provided should have sufficient mechanism to neutralize the inhibitory effect of antibiotics and other substances in blood. a) Culture media should be available for detecting bacteria and fungi, including fastidious organisms. b) The culture bottles should be unbreakable in normal conditions. c) The culture system should be suitable for processing blood and sterile body fluids. Should be capable of processing both adult and the pediatric samples. The system should be maintenance free without any need for regular calibrations, controls or standards run by the user. The system should use leak proof and on noninvasive system to avoid contamination of equipment and environment. The culture bottles should have high stability and (4-6) months shelf life. The system should be supplied in a complete system with all accessories and startup reagents. Any software or database updates should be done free of cost by the firm, during the life of equipment, as and when it is released by the manufacturer. Required training, technical literature and support should be provided by the firm. Safety Feature Should have CE ("Conformite Europeene") from European Union notified body having 4 digit Safety identification number and US FDA There should be provision for demonstration of equipment before final purchase if required. Should be supplied 2KVA online UPS with battery backup 45minutes. 3 Years warranty of Machine, UPS and Battery must be written on Affidavit. Brochure should be attached.
Microbial Identification and Susceptibility Testing System The system should be fully automated, walk away system for identification and antibiotic susceptibility testing for bacterial isolates. Including automated filling of cards/ test system/dispensing based on colorimetric technology with sealed bar coded disposables cards. The system should be capable of simultaneous testing of minimum of 55 samples, (either 55 ID or AST). Should be able to anaerobic identification & sensitivity analysis of Gram positive bacteria, Gram negative bacteria and yeast like organisms. The system should be capable of identifying for fastidious organisms like H. Influenza, N.meningitidis etc. The system should be able to detect antibiotic resistant organism like MRSA, VRE, HLAR,VRSA, B-lactamase and ESBL production. It should be an intelligent system and should give alert for any unusual antimicrobial resistance. The system should have barcode scanning system for Easy management of samples and which capable of testing for antimicrobial susceptibility of yeast and yeast like organisms. The system should be maintenance free without any need for regular calibrations, controls or standards run by the user. The system should use leak proof and noninvasive system to avoid contamination of equipment and the environment. The identification system should complete in itself without the need of an additional test done manually. The system should have panels for identification alone or antibiotic susceptibility alone. The Reagents/Strips should have high stability and (4-6) months shelf life The system should have facilities for data management and storage and quality control. The system should be supplied in a complete system with all accessories, hardware's like computer, printer etc and the required software and startup reagents. The system should have expert software for analyzing the raw data and provide detailed interpretive results. Any software or database updates should be done free of cost by the firm, during the life of the equipment, as and when it is released by the manufacturer. Should have CE ("Conformite Europeene") from European Union notified body having 4 digit identification number and US FDA. There should be provision for demonstration of equipment before final purchase if required. Should be 2KVA online UPS with battery backup 45minutes. 3 Years warranty of Machine, UPS and Battery most be written on Affidavit. Brochure should be attached.
Large bath tub for adult (L- 152 cm )
Radiant Heat Warmer (Servo controlled)
Multipara Monitor with infant & pediatrics SPO2 probe & Pedia cuff
Syringe Pump
Blood Gas Machine
Bubble CPAP with compressor with 5 disposable interface
HFNC with compressor with baby interface
Portable OAE Instrument
O2 Hood
O2 flowmeter
Pediatric Laryngoscope (Curved & straight)
Pediatric Ambu bag with different size mask
Emergency crash cart trolley
Portable suction
Endotracheal tube from 2.6 to 6 no.
O2 Nasal cannula neonatal & Infant
Procedure Spot light
Digital BP Machine
Glucometer
Platelet Concentration system Centrifugal Machine
Battery operated Drill & Saw • Dual Function Drill • Combines the function of Acetabulum Reaming and normal Drilling. • 1200 RPM & High Torque. • 1Drill Hand Piece. 1Drill Chuck, 1Reamer Adopter. 2NOs. Battery. 1C-'arger, 1Chuck Key, 2 Ring in safety Box. • Saw Spec: RPM-0-18000 osc/min. • Oscilating Saw. • Powerfu1 , Portable. Variable speed without step. • 1 Saw Hand piece, 2 Saw Blade, 2 Battery, 1 Charger. 1chuck Key, 2Ring • Company should be CE & Iso 9001: 2015Certified
Pneumatic Tourniquet double cuff • Cuff Pressure range: 10 to 460mmhg. • Pressure regulation: better then+-5mmHg of set point. • Battery Backup: 3 hrs battery backup (in case of full charge) • Digital Display: Digital Display of set pressure, actual pressure, elapsed time and set time • Cuff: Different Sizes of Five Cuffs- Washable and easy fitting large, big, medium, small & pediatric).
Horizontal high pressure steam sterilizer (Autoclave) • Autoclave should be shell consist of chamber jacket. The chamber is made of thick stainless steel sheet. To minimize the heat loss the shell has been insulated with glass wool and covered with SS 304G Cover. • The Shell is mounted on a sturdy MS Tubular stand. Boiler id fitted with auto pressure control device to set and maintain the chamber pressure. • Door and ring should be made of thick stainless, steel plate. Fitted with semi-automatic temp. control system steam lock mechanism & jointless silicon gasket. • Should be supplied with: Water inlet/outlet valve, water level indicator with safety valve fitted with boiler, pressure gauge. Semi automatic temp. controller & Low water cut of system with alarm. • Size: 20"x48", Load 12 KW.
Stethoscope (Single bell tube)
Olfactometer
Self illuminating snellen’s chart
Centrifuge Machine Platelet concentration system or centrifugal Machine 1. Maximum speed should note exceed3500 RPM 2. Should have half HP brushless DC Centrifuge Motor. 3. Can be programmable to 0 to 99 minutes. 4. Machine should have 2 stage horizontal Roter can hold 4 tube buckets at a time 5. Machine should have air flow System to cools down the rotor chamber protect the blood samples and maximize the sample intefrity. 6. Machine should equipped with shatterproof clear lid and with safety interlock system. 7. Machine should have lock and unlock iner on the panel. 8. Machine can be used to prepare30 ml 60 ml PRP and same amount of bone marrow concentration
Microtome
Digital Physiograph with data acquisition system • Number of inputs 4 channels. 2 amplifiers for recording bio-potentials & 2 general purpose amplifiers channels. • 1 stimulation unit capable of delivering square wave pulse of over defined parameters, Voltage range 0-10V, pulse duration range 1-1000msec, frequency range 0-100Hz, Current range 0- 20mA,Integrated and synchronised with software. • Data Sampling frequency more than 10Khz and linked to the computer through high speed USB2 port. • Facility for ECG leads (I, II, Ill, aVL, aVF, aVR etc) with real time cardiac axis and vector analysis. • Four force sensor balance board for body sway analysis that communicate with the software. • Online & offline analysis with various export options for common formats. • Software with step by step instructions, protocol and experimental design for performing various experiments in physiology teaching applications. Also should have sample data for animal experiments for demonstrating to the students. • Online facility for students to preview and analyse the data from anywhere outside the laboratory through internet would be preferable.(Optional) • Licensed Software It should have various automatic analysis modules for ECG, HRV, Blood Pressure, Peak analysis, spike histogram etc • Real time data streaming with Excel, MatLab and other common formats. • Necessary certificate for safe use for human. • Dual core 13 processor based desktop computers with DVD RW, 4 GB RAM, 11013 500 GB, 19’’ LED Monitor, Original Windows OS, UPS and suitable printer should be supplied. • Demonstration and training at site. • ISO, IEC and other safety and quality Certificate.
CAL for amphibian experiment • The software program should be a user-friendly interactive desktop application, capable of running several applications simultaneously within one program including: data collection, background materials, data analyses, and reporting options. • The software should have interactive experiments including content, procedure, literature, videos etc. • It should allow students to save their laboratory progress and PDF report of their data. • Human Physiology, Airflow, Autonomic Nervous System (ANS), Blood Clotting, Blood Counting, Blood Pressure, Body Temperature, Breathing, Cerdiorespiratory Effects of Exercise, Cardiovascular Effects of Exercise, Diving Response, Electroencephalography (EEG), Electro-oculography (EGG), Energy Expenditure & Exercise, Glucose Absorption Heart & ECG, Licari & Peripheral Circulation, 'lean Sound, Kidney & Urine, Lung Volumes Mechanics of Ventilation, Muscle & EMG, Peripheral Nerve Function, Reflexes and Reaction Times, Sensory Illusions, Sensory Physiology, Skeletal Muscle Function Spinal Reflexes, Stroop Test, Water Balance. • Animal Physiology Animal Metabolism, Frog I lean, Frog Nerve,Frog Neuromuscular Junction, Frog Skeletal Muscle, Gin Trap Closure Reflex, Intracellular Action Potentials. • In Vitro experiments - Guinea Pig ileum experiment Dose Response Curve, Guinea Pig Trachea Experiments-Physiological antagonism, Experiments on the isolated, perfused mammalian heart. • In Vivo experiments -Effect of Drugs on Blood Pressure - Dog Blood Pressure, • 58-Effect of Miotics and Mydriatics on Rabbit Eye , Study the effects of several pharmacological agents on rat blood Pressure • Other experiments Pharmacology Airways Resistance and Vascular Resistance Mammalian Atria, Heart, Jejunum, Uterus Stimulated Ileum, Rat Vas Dcfcrens Unstimulated Ileum, Rat Vas Deferens. Rota Rod Experiments to test Sedative agents. Cooke's climbing experiment to differentiate between sedative agents and anti-psychotic drugs Analgesic Drugs -Using Hot Plate, Using Tail Flick Test and Writhing Test, Anti-Inflammatory Drugs -Using Carrageenan Rat Paw Edema Model, Local Anesthetics -Rabbit Corneal Reflex, Guinea pig- Infiltration anesthesia, Frog withdrawal Relex • Compatible Computer with 19-inch LED monitor, to be provided with system. • Lifetime license cost for offline model and subscription cost (5 years) can be provided separately. The software must have a facility to edit and customize lesion and create their own experiments as per the lecturer choice for at-least warranty terms. • The system should be upgradable to online cloud-based system in future so that the student can the data from any¬where using internet facility. • instrument- Four channeldata acquisition system for Human & Animal Physiology Experiments for Biophysical Parameters interfaced with above cited software for better hands-on training to students. • Mandatory demonstration and training. • Necessary certificate for safe use for human.
Software Ex-Pharm version T2.00 and EI for Windows
Mannequins for intravenous Arm training Adult
Ophthalmoscope
Schiotz tonometer
Over head shadowless light (For dissection work )
Scalpel Blade no-22
Knife handle (BP handle) no-4 L
Knife handle (BP handle) no-4
Knife handle (BP handle) no-3
Surgical Rectangular Tray
Surgical Rectangular Tray
Gastric Lavage Tube
Ryle’s tube
Plain Rubber Catheter size 12
Digital weighing machine for viscera
Complete set of FMT Projector Slides
Machine for pointing of knife
Presser Machine for washing
Fully Automatic Immuno Analyzer (CLIA Machine) Fully Automated immunodiagnostic system, should be based on enhanced micro-well based chemiluminiscence , walkaway, high throughput system for HIV I & II (4th Generation), HBsAg, HCV and Syphilis with latest acceptable Technology. Machine should be Newly Branded. It should have a capability to do the assay in continuous, random or batch mode. It should have continuous loading capacity of 80 or more samples. It should have the disposable tip sampling system to overcome the carryover and or cross contamination probability. It should have an ability to do on board dilution and tube dilution for high and abnormal samples. It should have the disposable tips system to avoid reagent carryover. Pipette tips should be disposable & non-carbonated non-conductive type. It may have continuous random access to loading and unloading reagents. Equipment should be latest version and must not be refurbished. At least 4 parameters must be done at one time. The instrument should provide comprehensive process check that performs monitors and verifies each step throughout sample and assay processing. Throughput of at least 70 or more tests/hr. The software should provide flexibility to use small tips for samples, large tips for reagents or similar tips for both samples and reagents. Instrument should not be more than 20 minutes start up time after switching on. Software should be capable of bi-directional host data interface, facilitating the creation of new worklist. Software should have an option of automatic creation of LJ graphs for QC samples. Software should allow retrieving the older calibration curves and can be readjusted according to new values of one or two calibrators. Software should provide flexibility to use Control and Calibrator positions for sample loading. Software should be Windows based software or any secured software with easy handling facility. Should be Provided 2KVA online UPS with Battery backup 45minutes. Brochure must be attached of the Equipment. System with UPS & battery should have five years warranty and it’s must be written in affidavit.
Hi Speed Centrifuge Machine (Digital) Should be automated rotor detection. Should be Maximum Speed 15000 RPM or more RPM, Rotor tube capacity 24 or more (5-7ml). Should be Controlled by microprocessor and backlit color LCD display. Should be Brushless motor and maintenance free and no carbon deposits.
Platelet Incubator with Agitator Platelet Incubator – Should have single pane tempered glass door for safety and better visibility of platelet bags Should have built in microcontroller based temperature recorder and controller unit (TRCU) positioned at eye level for better visibility Must have 7-day circular chart recorder and accuracy should be +/- 1 degree Celsius Should be able to maintain a temperature of 22 degrees with +/- 1 Degrees variations Should have display of 4*7 Segment LED with 0.5ºC display resolution Should have refrigeration with Thermo electric cooling method & 4W LED tube for uniform lighting Should comply IEC safety /EMI/EMC standards, ISO 9001 ,ISO 13485 certified and CE marked Should have chamber mounted electrical outlet agitator Should have built in voltage stabilizer Should have CFL lamp inside the incubator Should have magnetic gaskets for doors to prevent loss of air Must incorporate a inbuilt battery back up of 2 hours to ensure continuous operation of the TRCU during power failure Should have CFC free PU Insulatiom Platelet Agitator - Should be able to store minimum of 48 platelet bags Should have 65 +/-7 cycles motions per min Should have agitation pause function for 10 sec Should have LED indication for blown fuse Should have SS304 grade sliding stainless steel trays Should comply IEC safety /EMI/EMC standards, ISO 9001 ,ISO 13485 certified
Conference Room: 1. Supply and installation of Conference table one side semi-circular 35’x 5.5’, with 1.5’ space in the middle for walkway, wire management, etc., 2 nos. of electrical socket for all seats. 2. Podium with required sockets, switches, gooseneck mic. Etc. 3. Supply of revolving executive chair high back cushioned. 4. Supply of revolving without wheel chair medium back cushioned with arm-30nos. 5. Providing fixing cabinet matching to table 6’x3’ for storage. 6.Supply of Computer table & revolving computer chair. 7.Laptop: intel i5 processor, 8GB RAM, 512 GB M.2 SSD, Windows 10, Microsoft Office, with anti-virus software. 8. Laser MFD with more than 20ppm printing capacity. 9. Full HD Pan/Tilt/Zoom (PTZ) camera with USB 3.0 video output interface. Equipped with 1/2.7 inch image sensor with Full HD 1080p output resolution. 10x optical zoom, wide shooting angle, low light compatible. With IR Remote Control. 10. Ceiling Tile Microphone for Clutter free Setup with built in AEC, DARE Feedback Eliminator Algorithm as well as Voice Lift & noise cancellation. 11. Audio DSP which provides professional grade audio with built in AEC, Noise Cancellation and Feed back eliminator. 12. AV USB Hub for unififed connectivity on a single cable. 13. Powerful, energy efficient class D amplifier with 240W power driving capability. 14. 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. 15. 4k UHD 75” Interactive Flat Panel with atleast 20 points multi touch capability. 16. Laser pointer. 17.Laser pointer. 18.Installation and programming of the conference system including all wires, cables, connectors and accessories as required. 19. Providing fixing auto door closure in door, curtains including providing curtain rods, good quality. 20. Providing fixing auto door closure in door, curtains including providing curtain rods, good quality. 21. Supply and installation of electrical wiring, switches, LED ceiling lights, fans, etc. as required. 22. Light dimming facility for central lights. 23. Supply and installation of 1.5T 5star inverter split AC with all connection and suitable stabilizers. 24. Supply and installation of Online UPS 2 kvs with required 65Ah SMF batteries and it’s connection. 25. Cutlery, flower vas, etc.
Medical Education Unit: 1.Auto-Tracking PTZ Camera is a professional-grade high quality 10x Zoom PTZ camera that also can track a moving presenter automatically while shooting video. Combining a high-performance pan/tilt/zoom camera, motion-sensitive tracking, ideal for mid to large-size lecture capture, bridging the feature of webcam and professional PTZ cameras in the market providing output over USB, HDMI & IP Stream. 2. Media Station: all-in-one device to combine 2 video and Upto 2 audio sources in a Full HD mix video for recording, editing and live streaming. Automatically perform backup to a server via FTP and SFTP if configured or even Cloud. 3.Multimedia Projector: Short throw Projector 16:10 Aspect Ratio, WXGA resolution, 1280p Full HD, 3400 ANSI Lumens, with bracket for the Projector. 4. Interactive white board 92” ceramic for projection display and writing with multi touch capability upto 10 touch points, with smart pens. 5. Laser MFD ( Scanner+ Printer+ Copier) with more than 20ppm printing capacity. 6. Laptop: intel i5 processor, 8GB RAM, 512 GB M.2 SSD, Windows 10, Microsoft Office, with anti-virus software. 7. Green chalkboard, magnetic, steel with aluminium frame 4’x3’. 8. Interactive Digital Podium with Controlling software, touch Control panel, Min. 22” interactive touch screen, (CPU 10th Gen Core i5Processor, 8GB RAM, 1TB HDD, DVDRW Optical drive, Windows 10, Microsoft Office) Central Control Panel for one touch On and Off switch and Module for Laptop connection. Input/Output Port USB, XLR, HDMI, VGA In & Out, Audio In & Out, LAN, Power Socket, LED Light with Switch, Digital Camera, Central Power Control with desired number of power output plugs. Equipments /Gadgets used in the podium should be based on International Qualitative Standard, space to incorporate Amplifier, Gooseneck Microphone, Document Camera/Visualiser and Matrix switcher, etc. capable for presentation also from Android & Apple. With Gooseneck Microphone, easy to use all-in-one wired system for presenters. 9. Webcam: 1080 Full HD quality video with omnidirectional mics. 10. Document Camera/Visualiser to capture A3size, min. 8 MegaPixels camera, min. 12x Digital & 20 x Optical zoom, LED lights, 1080P full HD output, Image tilt / rotation. 11. Handheld Microphone System, easy to use all-in-one wireless system for presenters. Rely on a solid transmission with up to 10 compatible channels in a stable UHF band-2nos. 12. Lapel Microphone System, easy to use all-in-one wireless system for presenters. Rely on a solid transmission with up to 10 compatible channels in a stable UHF band. 13. Professional grade audio DSP to provide a single usb cable for clutter-free,connection of peripheral devices like usb cameras, speakerphones as well as panels or displays to computer or laptop. 14. Powerful, energy efficient class D amplifier with 240W power driving capability. 15. powerful 2-way performance speaker, high fidelity reproduction of music and speech-4nos. 16. Oval Table 4’x3’ wooden with good quality laminates-6nos. 17. Executive Table 6’x3’ with side drawers & cabinet wooden with good quality laminates-4nos. 18. Executive revolving Chair medium back-6nos. 19. Supply of good quality cushioned chairs for participants-50nos. 20. Auto door closure in door, curtains including curtain rods, good quality. 21. Proving fixing Vertical blinds good quality-4. 22. Electrical wiring, switch socket, LED lights and accessories as required. 23. Installation and programming of the audio video system including all wires, cables, connectors and accessories as required. 24. Supply and installation of 1.5T 5star inverter split AC with connection and stabilizers-2nos. 25. Supply and installation of Inverter 1700VA (24V) with 150Ah battery and it’s connection.
FILM CITY
ASAP IMPACT PVT LTD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.02 MB
tender23.pdf
Tender Documents • 0.09 MB
BOQ_86730.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .