REPAIRS AND MAINT OF OTM MD ACCN OF INF BN III AT MIL STN SHAHJHANPUR UNDER GE EAST BAREILLY

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Refixing of shutter in the same opening after minor repair like change of hinges, minor carpentory work for proper fixing etc complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed. .

S&F steel ventilator with top hang shutter including hinges steel pag complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framed guard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. .

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. .

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F hasp and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws complete all as specified and directed.

S&F 75 mm butt hinges (medium weight) cold rolled mild steel and fixed etc complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed etc complete all as specified and directed.

S&F 150 mm long mild steel pressed handles oval type stove enamlled black etc complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all labours articles n. exc 200 cu cm each complete all as specified and as directed.

S&F 200 mm long mild steel Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed etc complete all as specified and directed.

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails etc complete all as specified and directed.

S&F 20mm thick boarding with nails as in cup board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) for filling in bed block of hold fast etc complete all as specified and direcetd.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed. .

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 etc complete all as specified and directed.

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down aluminium door/window of any size and refixing the same in same opening after minor repair including change of bidding etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair Aluminium Mortice lock 4 lever of size 75mm complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer (g) Making good of wall surface to match with existing surface complete all as specified and directed. ( Make of aluminium section shall be -Jindal/Indulco and Aluminium Fittings shall be -Sandhu ISI marked or equivalent as approved bu GE.)

S&F aluminium anodised windows,ventiletators frame with side/top hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg tay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed ( Make of aluminium section shall be -Jindal/Indulco and Aluminium Fittings shall be -Sandhu ISI marked or equivalent as approved bu GE.)

S&F aluminium anodised sliding fixed window / ventilator with 100 x 44mm frame including 4.5mm tinted glass fixed with rubber gasket with aluminium beading clips, frame with duco pattern grill of size 75mmx75mm fixed with aluminium beading 0.7mm thick. Making good to wall surfaces to match with existing surface complete all as specified and directed. ( Make of aluminium section shall be -Jindal/Indulco and Aluminium Fittings shall be -Sandhu ISI marked or equivalent as approved bu GE.)

S&F for 0.63mm thick plain, galvanised, mild steel sheeting, in crumple section joints, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified & directed.

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed.

M&L 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F non asbestos fibre cement building boards 4mm thick , fixed or laid / inserted to anodised Aluminium framework/ snapgrid size of grid 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedcomplete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed. .

M&L for machine cut mirror polish kota stone slab flooring 20-25mm thich laid over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shade of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers laid over and including 10mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path & finished the cement concrete surface even and smooth with out using extra cement complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.

M&L for Plain cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Sand filling under floors/ paver block or in foundation including watering and consolidation complete all as specified and directed

M&L for machine pressed precast conctete interlocking paver block any shape and any size conforming to IS 15658-2006 of 80mm thickness ,M -40 grade with grey cement and pigment complete all as specified and directed

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed. .

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling complete all as specified and directed.

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified and directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified and directed.

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick cement screed bed in CM (1:6), including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement laid over and including 10 mm thick backing coat in CM 1:4, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc laid over & including 15 mm thick screed bed in CM 1:6 set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc including 10 mm thick screed bed/backing coat in CM 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM (1:6), including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering/backing coat in CM 1:4 complete complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern of size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe complete all as specified and directed.

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed complete all as specified and directed.

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. .

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) complete all as specified and directed. .

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr but n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene multilayer water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene multilayer water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed. .

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed. .

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed.

S&F 75 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

Taking up or down existing GI Tubing 20 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

S&F, GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed. .

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed. .

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (minimum wt. 90gms). Make : Prayag

S&F (in repairs) Bib taps cast copper alloy with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed all as specified (Minimum wt 40 Gms) complete all as specified and directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

S&F GI cover/ Lid 0.45m dia 0.20m height of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 to 1000 ltr capacity with poper fixing arrangement complete all as specified and directed

S&F in repair fancy type curtain rod 20 mm MS conduit rod PVC coated including fancy nob and ms bracket for hangging curtain rod complete all as specified and directed

M/s Super Electric Works

GAYATRI CORPORATION

M/S WASEEM KHAN CONTRACTOR

m/s udit constructions

dm enterprises