SPECIAL REPAIRS TO BLDG NO P 280 AT INS VALSURA JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of entire debris as ordered outside MD land complete all as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.

Dismantling of Plain or Corrugated or semi corrugated steel sheet including ridges fixed in roof covering and stacking at site where directed.

Dismantling wrought iron or mild steel work any description not otherwise provided for .and stacking at site complete all as directed,

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 7 here-in-above, but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of pipe line, cable etc and getting out in .soft/ loose soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L for PCC 1:3:6, type C1 (using 20 mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified.

M&L for providing precast cement concrete Type B1 1:2:4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed. (Note: Reinforcement shall be measured and paid separately.)

M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:4 complete all as specified.

M&L factory made pre cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks or slabs, 10 cm thick (plain or interlocking joints) and setting in CM 1:4 complete all as specified.

Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification with out any extra cost complete all as directed.

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved.

S&F first class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as directed.

S&F 35 mm thick first class hard wood factory made plain framed panelled door shutter (any number of panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle boards with commercial veneering on both face the size of rail and style as per IS - 1003 (Part I) kiln seasoned and chemically pressure treated and fixed to chowkats complete all as directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames and shutters for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed.

S&F 12 mm thick toughened glass door shutters (area of each shutter exc 1.5 sqm but n. exc 3 sqm ) provided with 2 Nos stainless steel brackets for fixing each shutter, 2 Nos 25 mm dia stainless steel handles 600 mm long of approved design, locking arrangements including floor spring, cutting/drilling holes as required for fixing all fixtures complete all as directed. Make: Ozone / Doma or equivalent as approved.

S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs in-cluding roller and roller plate complete all as directed.

S&F 70 mm long floor door stopper of aluminium body with rubber stud complete all as directed.

S&F brass mortice lock, vertical type of size 100mm, 4 lever.

S&F floor door closer aluminium (extruded section body), hydraulically regulated, designation No.3 universal type, suitale for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as directed..

S&F framed bracket of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, rivering etc. as per sample complete all as dircted..

S&F mild steel hold fasts of flats iron 25x5mm confirming to Fe 410-O or Fe 310-O and similar items.

S&F rolled Mild Steel sections confirming to Fe 410-W (Gde-E-250) Quality - A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fatening and heavy brackets framing (Beam, tee, angle, channel, flat section or ERW) including distance pieces, cleats, etc. IS 1161 Grade 1161

S&F plates any thickness (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes and fixed by welding as required in stairs , cable duct cover etc as instructed complet all as directed.as directed . steel conforming toFe 410-W(Gde-E- 250) quality 'A'.

S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified.

S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 36 here- in – above but 5 mm dia and over upto 10 mm dia as in stirrups

S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified.

S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based plain or curved steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified.

S&F antibird net UA black in colour made of material polyfin all weather proof co-polymer of machine knotting using CNC machines with DSLS technology fo antislip knoting, diameter of the net is 1mm and size of mesh 25X25mm fixing in wall with necessary fitment complete all as directed.

Material and labour for removal of existing WPT course or any other kind of treatment surface over roof slab and cleaning of surface with wire brushes and water removing of unsolvent materials and depositing of the same outside MoD land and provide 15 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil bound bituminous primer @ 0.30 Kg/Sqm, then apply a coat of blown type bitument, grade 85/ 25 conforming to IS:702 heated to a working temperature of 180 degree celsius and applied @ 1.2 Kg per Ssqm of the surface area and providing 4mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure as directed and finally finished the top surface with two coats of thermal resistant paint complete all as specified and as directed. Note: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris , 15 mm thick 1:3 screed & complete APP treatment. (ii) WPC will be paid seperately (iii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.

M&L for 40mm avg thick plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) for levelling course complete all as directed.

M&L double charged vitrified ceramic tiles in Dark shade of size 800x800x10 mm thick (square/ rectangular) polished, in floors etc. tiles laid over and including 15 mm thick screed bed in cement mortar 1 :6 set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed in floor and wall surfaces complete all directed.

All same as per item No. 43 here-in-above but as in skiting / verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item No 43 & 44 : i) Quoted rate is deemed to be inclusive of cement screed/ back coat. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L for durastone ultra strong dark colour outdoor vitrified tiles of size 600x600x10 mm thick in floor, providing 5mm thick spacer and filling with apoxy, tiles laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed in floor surfaces complete all directed. Note: (i) Quoted rate is deemed to be inclusive of cement screed, (ii) Shade and colour approved by GE

M&L 16-18 mm thick granite slab (Jet Black) work (table rubbed, polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (Note: Quoted rate is deemed to be inclusive of Screed bed)

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick/ block masonry surfaces other than fair faces of brick work mixed with WPC as per manufacturer instruction, and finished the surface fair and even complete all as specified and directed. (Note : WPC measured and paid separately).

M&L for rendering 15 mm thick in CM 1:6 on brick/ block masonry surfaces other than fair faces of brick work finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified.

M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for preparing new plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer over a coat of 1mm thick white cement based wall care putty complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer over a coat of 1mm thick white cement based wall care putty complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) over a coat of exterior primer complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) over a coat of exterior primer complete all as specified.

M&L for two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

M&L for two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M&L for one coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

All as per item No 61 hereinbefore but on old painted steel surface.

M&L for complete removal of existing treatment and applying two or more coats of French polishing till to obtain mirror finish on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works complete all as specified.

M&L for newly wooden surface applying coats of French polishing till to obtain mirror finish on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified.

S&F 5 mm thick sheet glass, ordinary quality and glazing with 25 micron solar reflective film in squares exceeding 0.5 sq. m in each pane.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections not exceeding 0.5 Sqm in each pane complete all as directed.

E&M Items: Taking, down carefully copper/ aluminium point wiring (Light, Fan, socket or power) complete (fittings such as switches, celling roses, pendants, regulators, sockets, DB's) etc all as specified and directed.

M&L for concealed suitable for POP pattern point wiring with 1100 V, 1.5 Sqmm single core PVC FRLS insulated unsheathed cable, copper conductor multistranded passing through including concealed on top of POP PVC conduit 20mm, concealed MS box/ PVC/ MS/ Cast Iron box and logic modular whtie plates of suitable as required at site with PVC insulated unsheathed stranded copper of size 1.5 sqmm earth copper cable, for one light point, bell point, fan point controlled by one switch including cutting and making good surface of walls applying suitable painting as required all as directed.

All as per item No. 68 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in same board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable complete all as directed.

All as per item No.68 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in independent board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

All as per item No. 68 here-in-above, but size of cable 2.5 Sq.mm for 16 Amp and 6 Amp (3 pin) combined, modular switch socket in independent board with earth wire 2.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

All as per item No. 68 here-in-above, but size of cable 4 Sq.mm for AC Metal socket in independent board with earth wire 4 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

S&F in repair Modular switch 1 way 6 Amps,1 module all as specified and direced.

S&F in repair Modular switch 1 way 16 Amps,1 module all as specified and direced.

S&F in repair Modular Socket 6A -2/3 pin combinaed 2 Module all as specified and directed.

S&F in repair Modular Socket 16A -2/3 pin combinaed 2 Module all as specified and directed.

S&F in repair Ceiling rose surface bakelite White/ Ivory/ Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.

S&F 10 W LED deep recess mounted, COB based round fixed downlight with die cast aluminium housing and 24 degree beam angle fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LERS02R010XW 10W or equivalent of Bajaj / Osram/ Philips/ Schreder/ Havells.

S&F 12 W surface mounted, COB downlight with die cast aluminium housing and gold finish reflector and 38 degree beam angle fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LERSWGS012SC or equivalent of Bajaj / Osram/ Philips/ Schreder/ Havells.

S&F 12 W surface mounted, square panel with die cast aluminium housing fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LNVE02S0012SC or equivalent of Bajaj / Osram/ Philips/ Schreder/ Havells.

Taking down existing light fittings fixed in any description S&F new 42 W ultra slim, LED panel light fittings extrucded aluminium housing frame (Pendant) 1x4 ft. The CCT should be 6000 K including suspended accessories etc fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LSVR03S042XW or equivalent of Bajaj / Osram/ Philips/ Schreder/ Havells.

Taking down existing Decorative type light fittings fixed on any description of after necessary electrical disconnection & refixing the same in existing / different location as ordered after repair work is carried out in all respects & making necessary electrical connections & testing on completion complete all as directed..

S&F 300mm sweep metal Body Exhaust Fans AC single phase 230/ 240 V of size with lower shutter complete all as directed. Make: Bajaj Model No. Supreme Plus 300 mm 900 rpm Ind EX Fan or equivalent in Khetan/ Havells/ Orient.

Taking down existing any & capacity of split type AC fixed in any description of after necessary electrical disconnection & refixing the same in existing / different location as ordered after repair work is carried out in all respects & making necessary electrical connections & testing on completion complete all as directed.

S&F Single pole sheet metal enclosure with a two pin and earth plug and socket complete 240V with one single pole MCB 20 amp all as specified and directed by Engr-in-Charge

S&F MCCB DB's VTPN (Vertical DB) type double door in wall/ nitch when MCCB's to be used four pole and neutral, 8 way, 415 Volt with rated busbar, suitable for flush mounting and surface mounting with 160 Amps copper busbar for each pahse and 2 neutral bar, 2 Earth bar and cable ties for cble management, fully insulated busbar and shrouded Neutral bar, improved pan assembly for ease of intallation, Prefitted masking sheet, Reversible door for IP 43 & IP 54 DBs with provision for DPX3 160 MCCB as incomer and TPN/ SPN/ DP/ SP outgoing IP 54 Protection Make: Legrand Cat No. 5077 52 (No. of modules DPX3 160+24) or equivalent in Indo Asian, Standard and incuding MCCB DPX3 160 Amp 415 V with adjustable thermal and magnetic setting of breaking capacity 36 kA complete all as specified and as directed by Engineer-in-Charge. Make: 4200 87 (MCCB 160 Amps) or equivalent in Indo Asian, Standard.

S&F sheet metal enclouser for DB's double door (Vertical DB) in wall/ nitch when MCB's to be used Triple pole and neutral, 8 way, 415 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F in repairs MCB TPN 63 Amp, 240 V, 50 Hz, AC supply. Make: Legrand Cat No. 4086 83 or equivalent of Havells / L&T / ABB

S&F in repairs MCB SPN 32 Amp 240 V 50 Hz AC supply, 10 kA. Make: Legrand Cat No. 4086 17 or equivalent of Havells / L&T / ABB

S&F in repairs MCB SP 6 to 32 amp, 50 Hz, AC supply, 10 kA. Make: Legrand Cat No. 4085 92 to 4085 95 / Havells / L&T / ABB

Taking down existing submain wiring and M&L for concealed type submain wiring with two runs of single core 6 Sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawing in and including PVC rigid medium grade conduit concealed of suitable size complete including provision of 6 Sq mm copper unsheathed cable PVC insulated as earthwire connected to earth doll inclusive of al tees, bends, elbows,reducers etc all as specified and directed. Note: 3 runs of 6 sqmm cable and one run of PVC concealed conduit shall be measured as one unit length.

Taking up existing Cable and Supply, laying, testing XLPE insulated screened, PVC innersheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sq.mm, 3.5 core complete all as directed.

Supply and lay 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2, laid in trenches as cable protection with all fittings complete all as specified.

M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead wire protected by Gl light grade pipe 15 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, char coal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point, complete all as specified including testing on completion.

S&F in repairs three phase AC Electronic energy meter of accuracy class 1.0, 3X240V, 50Hz with backlit LCD display of rating 10-60A (Measures & Displays kWh, V, I, kW, PF, Hz, Last month history of kWh & MD in kW) with special features like TOD, Tamper logging, Optical Communication port & Display in absence power including (CT) complete all as directed. Make: HPL Electric & Power Ltd Cat No. TPPB1521130000ME01 or equivalent of MECO, SECURE, L&T (Note: Old meter shall be deposited at AGE E/M Store yard.)

Hirachand Sunderji and co

1R K Traders

S t modi

Quick Building Service

ruturajconstruction

M/s. Jayant G Rampariya

JAMNAGAR ELECTRIC AND MACHINERY CO