MANNING AND OPERATION AT RL 30 PUMP HOUSE INCLUDING MISC REPAIRS AT INA EZHIMALA

Amount

Note applicable for Item No.02 of BOQ:- (FOR SPECIAL ATTENTION OF BIDDERS) If the lowest quoted amount is less than the estimated cost of the work mentioned in NIT, the lowest bidder will have to submit FDR/BGB in favour of Accepting Officer within 7 (Seven) days of opening of financial Bid for the difference in estimated cost and quoted amount. In case the said FDR/BGB is not submitted within stipulated period as mentioned above, the contractor shall be banned for 6 months and his bid will be rejected. FDR/GBG will be released only after completion of entire work and production of proof for the payment of wages to all the workers employed under the contract is paid not less than the minimum wages notified by the Central Govt./State Govt. whichever is more

Outsourcing services for operation of SCADA based water supply pumping and distribution system, including servicing of all the programmable logic control based control panels, checking the circuits,changing the time of pumps/valves from the control panel/ SCADA system. Manual/ Remote operations from the Control panel/ SCADA System if in case of water deficiency - 01 Nos highly skilled technician /shift of 8hrs in three shifts. The technician should be having the trained certificate from the control panel manufacturer. a) The rate quoted is deemed to be inclusive of the charges for communication for all the existing SIM cards used in PLC based control panel. b) The rate quoted also include the charges for the existing Broad band connection with static IP(BSNL) at RL 30 pump house.

Notes:- a) The servicing of Motorised valve, PLC base control Panels, communication Panels, Mimic Panels shall be done by authorized representative of the Manufacturer only. The technician shall submit a letter from the manufacturer as proof of his being a authorized representative of the manufacturer. The technician shall also submit a signed report on original letter head of the manufacturer that servicing as been carried out by him. b) Any changes to the Programmable Logic Controller(PLC), e.g. Changes in ladder logic of programme, changes in operational timing, etc. (limited to the scope of work covered under this AMC) shall be carried out by authorized representative of the manfacturer of PLC based Panels only. The programmer shall submit a letter from the manufacturer as proof of his being an authorized representative of the manufacturer. The programmer shall also submit a signed report on original letter head of the manufacturer that servicing as been carried out by him. c) Any changes to the SCADA software, e.g. Changes in report format, changes in operational screens, creation of soft keys etc. (limited to the scope of work covered under this AMC) shall be carried out by authorized representative of the Manufacturer of PLC based Panels only. The technician shall submit a letter from the manufacturer as proof of his being a authorized representative of the manufacturer. The technician shall also submit a signed report on original letterhead of the manufacturer that servicing as been carried out by him.

Servicing of Motorised Butterfly Valve - size 100mm / 150 mm i/c removing, cleaning, greasing, checking for wear and tear, refixing, testing, installing, commissioning as directed by the Engineer-In-Charge. (Note : Cost of Spares required to be replaced are not included in the above item and the same will be measured and paid for seperately as supply only in repairs under relevant item of this schedule.)

Servicing of Motorised Butterfly Valve - size 200 mm i/c removing, cleaning, greasing, checking for wear and tear, refixing, testing, installing, commissioning as directed by the Engineer-In-Charge . (Note : Cost of Spares required to be replaced are not included in the above item and the same will be measured and paid for seperately as supply only in repairs under relevant item of this schedule.)

Servicing of Motorised Butterfly Valve - size 300 mm i/c removing, cleaning, greasing, checking for wear and tear, refixing, testing, installing, commissioning as directed by the Engineer-In-Charge. (Note : Cost of Spares required to be replaced are not included in the above item and the same will be measured and paid for seperately as supply only in repairs under relevant item of this schedule.)

Supply and fix in repair/replacement of Single Phasing Preventor complete all as specified and directed. Make:- MINILEC Part No. :- VSPD2 or equivalent in L&T.

Supply and fix in repair/replacement of Relay with base - 4 C/O, 240V DC complete all as specified and directed. Make:- IDEC (Part No. :- RU4S-A220) or equivalent in LEONE/ Omron

Supply and fix in repair/replacement of Relay with base - 4 C/O, 24V DC complete all as specified and directed. Make:- IDEC (Part No. :- RU4S-D24) or equivalent in LEONE/ Omron

Supply and fix in repair/replacement of LED Indicators of Colour : Red / Yellow / Green complete all as specified and directed. Make:- TELEMECHANIQUE (Part No. :- Red-XB7-EV 04 MPN,Yellow-XB7-EV 05 MPN,Green-XB7-EV 03 MPN) or Equivalent in ESBEE/TEKNIC.

Supply and fix in repair/replacement of LED Indicators of Colour : Blue complete all as specified and directed. Make:- TELEMECHANIQUE (Part No. :- XB7-EV 06 MPN) or Equivalent in ESBEE/TEKNIC.

Supply and fix in repair/replacement of Pressure Transmitter complete all as specified and directed. Make: DANFOSS (Part No. :- 060G1133MBS3000 (0-16 Bar)) or Equivalent in INDFOSS.

Supply and fix in repair/replacement of Push Button with LED Indicator – 240V A.C, Colour : Red / Yellow / Green. complete all as specified and directed. Make:-TELEMECHANIQUE (Part No. :- Red-XB5-AW 34 M 2 N,Yellow-XB5-AW 35 M 1 N,Green-XB5-AW 33 M 1 N) or Equivalent in TEKNIC/ ESBEE

Supply and fix in repair/replacement only NO Contact - 240V A.C.,3 A complete all as specified and directed. Make:-TELEMECHANIQUE (Part No. :- 2BE-101N) or Equivalent in TEKNIC/ ESBEE/L&T.

Supply and fix in repair/replacement only NC Contact - 240V A.C.,3 A complete all as specified and directed. Make:-TELEMECHANIQUE (Part No. :- 2BE-102N) or Equivalent in TEKNIC/ ESBEE/L&T.

Supply and fix in repair/ replacement SMPS Input Voltage: 230 V, Output Voltage: 24 V. complete all as specified and directed. Make:- NHP (Part No. :- NHP-ES-240) or Equivalent in TELEMECHANIQUE.

Supply and fix in repair/ replacement Programmable Logic Controller complete all as specified and directed. Make:- MESSUNG or as approved by GE. Note:- Downloading and uploading of the PLC Programs carried out only in the presence of authorized panel manufacturer and the Engineer in charge

Supply and fix in repair/replacement I/O Module complete all as specified and directed. Make:- MESSUNG (Part No. :- NEXGENIE-2000) or Equivalent in INDFOSS. Note:- Replacement of the I/O Module should be carried out ,with out harming the existing PLC Programm,and in the presence of authorized panel manufacturer and the Engineer in charge

Supply and fix in repair/ replacement of wireless modem complete all as specified and directed. Make:- MAESTRO HERITAGE (Part No. :- M1003G) or Equivalent in LEO/MAXON

Supply and fix in repair/ replacement of Antenna for wireless communication complete all as specified and directed. Make:- KENSTEL (Part No. :- KSA-5800) or Equivalent in MAXON.

Supply and fix in repair/replacement of Transformer Input voltage: 230v AC Output voltage: 12V AC 3 phase complete all as specified and directed. Make:- AIM or Equivalent in L&T/ABB/Legrand/Schneider.

Supply and fix in repair/replacement of MCB 3P,10 A.complete all as specified and directed. Make:- HAVELLS ( Part No. :- Havells C10) or Equivalent in L&T/ TELEMECHANIQUE

Supply and fix in repair/replacement of Ultrasonic Level Sensor complete (sensing element for ULS Part No. QT50ULB of make- BANNER and PCB for ULS Part No. 20010973 of BANNER) as specified and directed. Make:- BANNER (Part No. QT 50 ULB P/N 2726 ) or equivalent in Endress+Hauser/Siemens.

Supply and fix in repair/replacement of Electric motor suitable for actuator for 150mm dia Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. RT 10) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of Electric motor suitable for actuator for 200mm dia Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. RT 20) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of Electric motor suitable for actuator for 300 mm dia. Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. RT 30) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of M.S. Spiral gear for gear box of actuator for 100mm dia. Butterfly valve complete all as specified and directed. Make: RITETORK ( Part No. Worm RT 5) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of M.S. Spiral gear for gear box of actuator for 150mm dia. Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. Worm RT 10) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of M.S. Spiral gear for gear box of actuator for 200mm dia. Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. Worm RT 20) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply and fix in repair/replacement of M.S. Spiral gear for gear box of actuator for 300mm dia. Butterfly valve complete all as specified and directed. Make:- RITETORK ( Part No. Worm RT30) or equivalent in MARSH/ Mitsubishi/Grundfos.

Supply only in repair/replacement of Butterfly valve of size 100 mm dia complete all as specified and directed. Make:- AUDCO ( Part No. IBFLPC100) or Equivalent in VIRGO/ INTERVALVE/LEADER/ZOLOTO/SANT/L&T/KIRLOSKAR.

Supply only in repair/replacement of Butterfly valve of size 150 mm dia complete all as specified and directed. Make:- AUDCO ( Part No. IBFLPC150) or Equivalent in VIRGO/ INTERVALVE/LEADER/ZOLOTO/SANT/L&T/KIRLOSKAR.

Supply only in repair/replacement of Butterfly valve of size 200 mm dia complete all as specified and directed. Make:- AUDCO ( Part No. IBFLPC200) or Equivalent in VIRGO/ INTERVALVE/LEADER/ZOLOTO/SANT/L&T/KIRLOSKAR.

Supply only in repair/replacement of Butterfly valve of size 300 mm dia complete all as specified and directed. Make:- AUDCO ( Part No. IBFLPC300) or Equivalent in VIRGO/ INTERVALVE/LEADER/ZOLOTO/SANT/L&T/KIRLOSKAR.

Supply and fix in repair/replacement of Capacitor for Actuator suitable for 100/150/200/300mm dia Butterfly Valve complete all as specified and directed. Make:- L&T/HAVELLS/LEGRAND/SCHNEIDER.

Supply and fix in repair/replacement of Resistor for Actuator suitable for 100/150/200/300mm dia Butterfly Valve complete all as specified and directed. Make:- L&T/HAVELLS/LEGRAND/SCHNEIDER.

Supply and fix in repair/replacement of Hand Wheel for Actuator suitable for 100/150/200/300mm dia Butterfly Valve complete all as specified and directed.

Supply and fix in repair/replacement of Limit Switch for Actuator suitable for 100 /150/200/300 mm dia Butterfly Valve complete all as specified and directed. Make:- L&T/HAVELLS/LEGRAND/SCHNEIDER.

Supply and fix in repair/replacement of Top Cover for Actuator suitable for 100mm/150mm/200mm/300 mm dia Butterfly Valve complete all as specified and directed. Make:- AUDCO/VIRGO/ INTERVALVE/LEADER /ZOLOTO/SANT / L&T/KIRLOSKAR.

Supply and fix in repair/replacement of 6 Core 1.5 sqmm dia armoured cable complete all as specified and directed. Make:- POLYCAB/ HAVELLS/ FINOLEX

Supply and fix in repair/replacement of battery for 1.1 KVA UPS battery 12v 7.5 AH complete all as specified and directed.

Supply and fix HMI for Programmable Logic Controller complete all as specified and directed. Make :Mitsubishi, Siemens or existing make/brand of defective components/ spare parts or any reputed suitable make and as approved by GE.

CIMCON SOFTWARE INDIA PVT. LTD.