CA NO GE SOUTH AMB 11 2025 2026 SPECIAL REPAIR TO BLOCK NO 156 OF RWA RANE LINE UNDER GE SOUTH AMBALA CANTT

Amount

[B&R PORTION] Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed.

Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

Material and labour for coloured glazed ceramic tiles coloured (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and as directed.

Material and labour 20 mm thick black granite stone slab of any type with table rubbed and polished in cooking platforms , staircase and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Material and labour 20-25 mm thick Machine cut kota stone slab in flooring on treads, landing laid over 20mm thick cement mortar 1:4 screed jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed

Material and labour, 20-25 mm thick machine cut polished Kota stone slab in single piece for skirting , dado ,riser on vertical surfaces and over 15mm thick cement mortar 1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing befor fixing of kota stone complete.as specified and as directed

Material and labour PCC type B-1 (1:2:4) using 20 mm graded aggregate as in kerbs of mud stops, rounded or chamfered on edges , etc complete all as specified and directed

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.

Supply & fixing Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Fixing only Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.

Supply & fixing Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specified and directed .

Fixing only Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specified and directed .

Material & Labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) (brick walls) in cement mortar (1:3), complete all as specified.

Supply and fixing PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified.

Supply and fixing of kitchen cabinet in required sizes at site made out of 18mm thick lead free one side lamination and other side balancing lamination sheet, sheet and provn of shutter make out of 18mm thick one side decorative laminated pvc sheet all required brackets 5.5 screws etc the panel shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick edge bending tape or 90 degree edge bent fininsh as per make specification complete including taking existing cabinet of any type & any description complete all as specified and as directed

Supply and fixing Plain fillets second class hardwood .square,rectangular or triangular in section ,Exc 6 & n exc 13 sq cm clean sawn, secured with nails or brads, complete all as specified and directed.

Supply and fixing Plain fillets second class hardwood .square,rectangular or triangular in section n exc 3 sq cm bullnosed, splayed, chamfered or rounded on oneedge or face all as specified and directed.

Supply and fixing continuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 30mm completed as specified and directed.

Supply and fixing 100mm long hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws completed as specified and directed.

Supply and fixing 100mm long Aluminium handles, cast type,anodised, , complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all pillars, quoins aches, pillers, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Material & Labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified., complete all as specified.

Material and labour for brick work with sub class-"B" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any description all as specified.

Material and labour for 15 mm thick rendering on faces of brick or concrete surfaces in CM 1:4 . finishing the surface even and smooth without using extra cement.complete all as specified.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) finisheing the surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour for 10mm thick rendering on ceiling surfces in CM 1:3 finished even and smooth without using extra cement.complete all as specified and directed.

Material and labour for rough cast plaster on exterior walls in two layers, under layer 10mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm Rough cast plaster with sand gravel as specified as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the surface complete all as specified

Material and labour for two coats of cement base paint over a coat of alkali resistant primer of new surfaces of walls and incl preparation complete all as specified.

Material and labour for preparation new plastred surfaces of wall and applying two coats of oil bound distemper over a coat of primer applying with roller etc complete all as specified and directed.

Material and labour for preparing surfaces New plastered surfaces of ceiling and applying three coat of white washing complete as all specified and directed.

Material and labour for complete removal of existing treatment on surfaces of walls, chajjas, fascias etc and effloroscent salts and treating oil and greasy spots washing down with water and applying two coats of cement base paint over a coat of alkaline resistant primer including filling up all cracks with tar plastic (STP) crack filler and also, make good to plastered surface complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall and applying two coats of oil bound distemper incl chalk whitener etc complete all as specified and directed.

Material and labour for preparing surfaces old plastered surfaces of ceiling and applying one coat of white washing complete as all specified and directed.

Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified.

Supply and fixing (in repair) 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.

Supply & fixing (in repair) stop cock, fancy type, chromium plated, long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg) (Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply & fixed ( in repair) CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixinged (in repair) for vitreous China squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified.

Supply & fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified.

Supply & fixed in repair 10 litre capacity flush polypropylene cistern, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified.

Supply and fixing in repair towel rail 600mm long complete as specified and directed by Engr in charge.

Supply and fixing in repair Soap dish, any type, fixed to plugs with chromium plate brass screws complete as specified and directed by Engr in charge.

Supply and fixing in repair cast copper alloy, chromium plated shower rose incl long pipe complete as specified and directed.

Supply and fixinged (in repair) PVC connections 450/600 mm long and 15mm dia PTMT with PVC washers on both ends, complete all as specified.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long fixed in repairs complete as specified and directed by Engr in charge.

Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all asspecified.

Supply and fixing for 110mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall or in floors complete as specified and directed by Engr in charge.

Supply and fixing for 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall or in floor complete as specified and directed by Engr in charge.

Supply and fixing in repair 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

Supply and fixing in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) vent cowl of 75mm dia, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door all as specified and directed

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each, complete all as specified.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified.

Providing & fixing of three shutter vajra series Sliding Windows made of Pre Painted Steel and Galvanised Steel (Base Steel as per IS 513,D quality ,galvanised as per IS 277 with zinc of 120 GSM),using factory made section powder coated with pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for outer frame and 0.58mm thickness for Sliding Shutter Section,the outer frame for three tracks with grill provision size of 107mm x 44 mm and the window shutter section of 58 mm x 36 mm and the outer frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the shutter / sash frame and also have a groove of 21mm x 5mm to provide additional track and facilities with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass reputed make and fixed with EPDM weathering seal resistant accessories and S.S. Mesh for fly mesh shutter (304 grade) incl handle made of aluminium 1 Nos per each shutter and cut to length mitre jointed with corner brackets including installation of window system at site using anchor fasteners ,inclusive of conveyance of all materials accessories ,labour charges and erection at site with complete finished item of work, complete all as specified and directed and directed by Engineer-in-Charge.

Supply & fixing of ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitable provision as in ventilator in toilet/bathroom/staircase complete all as specified and directed by the Engr-in-Charge.

Supply & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete all as specified and directed by the Engr-in-Charge.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, complete all as specified and directed and directed by Engineer-in-Charge. Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, complete all as specified and directed and directed by Engineer-in-Charge. Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length , complete all as specified and directed and directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws , complete all as specified and directed.

Supply and fixing of providing 30 mm thick factory made 100% Solid WPC (Wood polymer Composite) Jointless gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),calcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 250 mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

Supply and fixing for Aluminium anodised, 200mm long barrel tower bolts of extruded section and fixed complete all as specified.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring , complete all as specified and directed.

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as inrepairs , complete all as specified and directed.

Supply and fixing in repair stainless steel curtain rod (Grade 304) 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each rod length at both end etc complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete in grounds floor and paving n.exc 15cm thickness (below or above ground level) all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

Material and labour for providing and laying factory made PVC moulded, dark red/yellow coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling existing paver block of any type complete all as specified & as directed

Material and labour for rendering 10 mm thick in CM 1:3 admixed with an including integral waterproofing compound @ 3% by weight of cement and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surface complete all as specified and directed.

Material and labour for cement concrete in foundations, filling and mass concrete type E2 1 : 5 :10 using 40 mm graded aggregate as in under sunken floor etc including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for cement concrete in foundations, filling and mass concrete type C2 1 : 3 :6 using 40 mm graded aggregate as in under sunken floor etc including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof complete all as specified and directed.

Material and labour for plain cement concrete,1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in roof padding, levelling coarse and finished top surface finished even and smooth including necessary form work complete all as specified.

Material and labour providing and laying 3mm th. APP (atactic polyproylene polymer) modified prefabricated five layer weight not less than 3.60 kg/sqm water proofing membrane black finish reinforced with non woven polyster matt and applying on top of it one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 at the rate of 1.2 kg/sqm, make as approved consisting of a coat bituminous primer @ 0.40 ltr/sqm by the same membrane manufactures of dercity 0.87 ro 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end , the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete all as per standered parctice as per manufacture's instructions The vital plysical and chemical parameters of the membrane shall be under:- (i) Joint strenth in longitudinal and transverse ditection at 23'c at 650/450 N/5cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane nor less then 150'c when tested in according with ASTM (d-5147) (iii) The laying if membrane shall be got down through the authriosed applicator or manufactures of membrane only complete all as spcified and directed.

Material and labour for hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in in CM 1:6 mixed with water with 5% water proofing compound and jointed , pointed in CM 1:3 mixed with 5 % crude oil by weight of cement complete all as specified and as directed .

Material and labour for PCC in 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 50mm thick as in plinth protection path, finished even and smooth without using extra cement with and including 10mm wide, 30mm deep joints at rate of 3 mtr centre to centre and every turning and filling the joints with 85/25 bitumen and sand(1:3) ratio mixture applied hot , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel sink with draining board made out of 1mm thick sheet for kitchenor laboratry with plug washer waste pipe, cast iro cantilever rackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mmx160mm complete all as specified and directed by Engineer-in-Charge.

[E&M PORTION ] Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 89.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 89.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

Description all as per srl item No 89.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Supply and fixing modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fixing modular switches, one way, 16Amps, one module, 230 volt , AC supply, complete all as specified and directed.

Supply and fixing modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed.

Supply and fixing modular socket outlet 6/16 amps,3 pin, 2 module, complete all as specified and directed.

Supply and fixing fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specified and directed.

Supply and fixing modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified.

Supply and fixing sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad top with one single pole MCB 32 Amp complete all as specified and directed.

Supply and fixing of LED light fitting 1x20W (lumen efficacy of >100 lm/W) , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed

Supply and fixing batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light,aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed.

Supply and fixing bracket for security light made up of 25/40/50mm dia suitable for security light, 0.6 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fixing LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE:-3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE:- 3 run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, ISI complete all as specified and directed.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, ISI marked complete all as specified and directed.

Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, 'B' Series complete all as specified and directed.

Supply and fixing of LED lamp 9 watt B-22 base complete including taking down old existing lamp any type complete all as specified and directed.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

NOTE:- Amount of credit of Rs. 76,779.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Anil jindal and sons (BID ID -3304921)

ANIL CONSTRUCTION CO. (BID ID -3310444)

power house batteries (BID ID -3305661)

Gupta Enterprises (BID ID -3310801)

M/s Gautam Electro Engineers (BID ID -3303380)