Associated works of Track maintenance under jurisdiction IMSD-TBAN of IMD-SAUS, CGM Ahmedabad unit for 24 months.

Item Breakup - A-USSOR - 2021

1000.00 material by wet mixing of different types of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips including all incidental transportation and stacking at site in Stacks. Note: Measurement shall be done in as per Stack measurement."

100.00 cement concrete of specified Nominal Mix for miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level : 22032 :- 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

50.00 25073 :- Pozzolana Portland Cement approved brands/makes

500.00 water from a n y location. Payment t o be done for Horse power of pump multiplied by pumping hours.

250.00 section & length from track, laid o n any Metre type & density of sleeper b y removing fi s h plates, fastenings & fi s h bolts and o t h e r materials including stacking all released materials w i t h i n a n average distance o f 5 0 0 metres a s directed by Engineer in-charge. N o t e : 1.Cutting of rails shall be paid separately. 2.Work to be done under traffic block." 61022 :- For Casual/Scattered Rail Renewal work

25.00 track with PSC sleepers lying on cess or at Bridge Approaches for casual renewal at isolated locations with all fittings complete to specified gauge & cross level with contractor's tools including packing and dressing of ballast, as directed by Engineer in-charge. Released materials shall be neatly stacked and handed over at specified location within an average lead of 250 m or near either side of Bridge approaches as directed. 62031 :- Locations other than Ballasted Deck Bridge

Each WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

500.00 plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt."

750000.00 area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert b y u s i n g w i r e brush, scrapper / sand emery paper etc., supply & provision of anti-corrosive treatment by application of graphite grease, as prescribed by Railway under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per Para-628 of Indian Railways Permanent Way Manual.

25000.00 curves, cross overs, points & crossings, Metre turn-in curves and at locations as required with contractor's grease graphite grade ""O"" IS 408 and as directed. "

50.00 PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process."

25.00 UTS, manually and perfectly vertical with contractor's labour, hacksaw blade and tools & plants - Note: 1.Manual cutting should be used only in emergencies with prior permission of sectional ADEN where machine cutting can not be arranged in time. 64031 :- On Cess

25.00 UTS rail WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

50.00 chamfering, in rail of any section and any UTS manually only inemergencies with contractor's labours, tools & plants, consumables etc." 64041 :- Hole of dia. 26.5mm and above

100000.00 procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer- In charge."

10000.00 Hopper Wagons, quantity distribution as p e r p r e - d e fi n e d site requirement, clearing infringements/jammed ballast, d i s t r i b u t i n g t h e u n l o a d e d ballast uniformly o v e r t h e track, profiling and boxing following all prescribed safety norms. 84041:- Under Traffic Block Conditions

30.00 block using Railway's welding portion and finishing of weld t o meet the p r e s c r i b e d tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding o f Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint t o original position and fixing o f joggled fi s h plate a t n e w weld, t o b e removed after passing o f w e l d i n U S F D t e s t as directed b y Engineer i n charge. Note: 1. Welding portion and related accessories as per Annexure - I shall be supplied by Railways. All other items required shall be supplied by the Contractor. 2. Welding s h a l l b e carrie d o u t o n l y b y trained w e l d e r h a v i n g v a l i d competency certificate. 3. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 4. Required nos. of Joggled fi s h plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track 92022 :- For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

4.00 (Cast Manganese Steel) crossings of all types as per reconditioning manual and ""Work Procedure for In-Situ Reconditioning of CMS Crossing using Robotic Welding Machine"" of RDSO through approved agency, finishing & grinding within permissible tolerance limit, as directed by engineer incharge. Note: (1) One obtuse crossing shall be considered equivalent to two nos. of crossing for payment. (2) Reconditioned crossing shall have Guaranteed service life of minimum 80 GMT. In case of pre- mature reconditioning, it shall be done by the contractor free of cost."

2000.00 Specifications and guidelines RDSO/2020/GE: IRS-0004 or latest in running line with suitable soil to the designed profile The work shall include uprooting and disposing of all the vegetation, benching at every 30 Cm vertical height, earthwork in benching portion and compaction using suitable slope vibratory Rollers/Compactors etc. to achieve prescribed MDD. Note: 1. Payment of cess repairs shall be based on the quantities worked out from the cross sectional calculations only and worked out from the initial ground levels before doing benching and final levels as done for new embankment. The earth work in benching portion shall not be paid extra as the same has been included in the rate. 2. The earth work shall be started only after Completing of the benching and certified. 3. The benching Work shall be done for a maximum height of 1.50 m at any time based on the progress of earthwork starting from toe of the embankment."

2000.00 for making cess on other side of the track (when no approaches available along track or no road vehicles to work at site) by dumping contractor's own earth, collected along toe of bank of any height on to other side of track & side slope of the existing bank by head load, duly crossing of tracks with all contractor's materials, labour, tools, plant including loading of earth in baskets, lifting, leading to the non-cess side of bank including crossing of tracks & dumping etc. and as directed by the Engineer in- charge." WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

300.00 location where caution order is imposed and ensuring to be on continuous vigil and exhibit necessary hand signals to the trains for their passage over caution spot. Note: 1) Prescribed protection equipment shall be supplied by Railways and the same shall be returned after work is over. 2) If Contractor fails to post watchman at any time during one day, penalty at double the accepted rates will be levied and 3) The watchman nominated by the contractor will be screened for suitability as per Railway norms." 124031 :- For one shift ( 12 Hrs)

250.00 clamp (supplied by Railway from nearest SSE Store) in running track conditions at welds on rail, as directed by engineer incharge (drilling of holes in rail, if required, shall be paid separately). Fixing Joggled Fish Plates with bolt / clamp (supplied by Railway from nearest SSE Store) in running track conditions at welds on rail, as directed by engineer in- charge (drilling of holes in rail, if required, shall be paid separately) 136013 :- With Clamps

2000.00 loops, Points & crossings etc . including special attention t o section f o r carrying out various maintenance works listed in Indian Railways P.Way Manual / Bridge Manual for safe running of goods and passenger trains with contractor's tools / labours etc. complete, as directed by E n g i n e e r in-charge. N o t e : Contractor shall arrange o n e gang a t a n y point of t i m e comprising o f minimum specified labours with sufficient experience in P.Way working 136041 :- One mobile Gang comprising of 15 physically fit labours plus 1 Mate. Note: ( 1 ) I n case, c o n t r a c t o r p r o v i d e s l e s s n o . of Labour/Mate or for non availability of vehicle, payment will be deducted for eac h suc h person o r non-availability of vehicle @ 20% of the accepted item rate, separately f o r each shortfall. (2) The Contractor shall keep one pick up Truck of minimum 1.5T payload capacity with Driver all the time a n d all expenditures for running at an average of 80 kms per day shall be born by the Contractor.

100.00 all types of PSC sleepers and fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge."

100000.00 including disposing of muck beyond Metre Railway boundary as per instructions of Engineer in-charge to keep drains clean and clear in cuttings etc."

300000.00 section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard." WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

300.00 6 m o f c e n t r e l i n e o f t r a c k & those obstructing views of Curves/LCs / Signal / Indicator at locations in section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. Note: Girth of more than 20 cm will only be considered as tree branch.

500.00 bottom width as 300mm and depth of Metre 450mm in cutting section by excavation in all types of soil including utilising excavated muck for dressing of cess, slopes etc. in Railway land."

4000.00 patrolling during cold / h o t weather on track for protecting track as per IRPWM. Note: 1.The person deployed for patrolling must have the following items: • Valid certificate o f competency issued b y Railways. • F i t f o r A - 3 medical category - certificate issued by registered medical practitioner 2.Necessary equipments prescribed shall be supplied by Railways for each patrolman and same to be handed over back to Railways in good condition. 3.The following equipment to be arranged by contractor for each patrol man: H.S.Flags Green - 1 N o (Standard size), H.S Flags Red- 2 Nos. (Standard size),Torch light 3 cell -1 no., Staff for flags -1 no., Whistle Thunder - 1no, Protective clothing to withstand climate, Gum boots, Haver sack. 136131: For duration of 8 hrs.

4000.00 monsoon / security patrolling whenever required for protection o f track a s per IRPWM (for a duration of 12 hours). Note: 1 . T h e p e r s o n deployed f o r patrolling must have the following items: • Valid certificate o f competency i s s u e d by Railways. • Fit for A-3 medical category - certificate issued b y registered medical practitioner. 2.The equipment supplied by Railways shall be handed over back to R a i l w a y s i n g o o d c o n d i t i o n : 3.The following equipment t o b e arranged by contractor f o r e a c h p a t r o l m a n : • H.S.flags (standard size): Green - 1 no. & Red - 2 Nos. • Torch (3 cell) - 1no.; Staff f o r flags - 1no.; Whistle thunder - 1no. •Protective cloth to withstand the climate; Gum boots; Haver sack" 136142 : For Night shift WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

100.00 Thermit welded rail joints on track or on cess for new welded joints to protect against normal corrosion for any rail section with two coats of ready mixed bituminous black paint of reputed make confirming to latest IS:9862 on welded area up to 10cm on either side including on the underside of rail foot by brush including surface preparation as per Railway's AT Weld Manual including lettering / weld numbering with approved enamel paint as directed Note: Before painting, dust, loose rust and mill scale and dirt shall be removed thoroughly by wire brushing. Scrubbing welded area with water to make it free from slag and other water soluble compounds to make it dry."

700.00 Thermit welded rail joints on track for old painted joints in normal corrosive prone area for any rail section with two coats of ready mixed bituminous black paint of reputed make confirming to IS:9862 latest version on welded area up to 10cm on either side including on the underside of rail foot by brush including surface preparation as per Railway's AT Weld Manual including lettering / weld numbering with approved enamel paint as directed Note: 1.Before painting, dust, dirt and flaked paint from the welded joint shall be removed thoroughly by scrapping with wire brush. Grease and oil shall be removed by use of appropriate solvent confirming to latest IS:1745. 2.Use of detergent followed by water washing should also be done to ensure removal of oil and grease apart from the greasing compound. 3.The paint should be procured along with the thinner recommended by the manufacturer of the paint. 4.No other thinner like kerosene oil should be used."

80.00 bordering etc. on new / old iron surface at various locations of Points & Crossings with details of turn-in / turn-out reference station mark on rail web for one set, duly preparing surface with contractor's wire brush and applying two coats of yellow synthetic enamel paint of approved quality as background and stenciling the details to suitable size, as described for every curve reference station mark / switch / crossing details with black enamel paint of approved quality complete, as directed : Note: Stenciling of letters is only permitted. No hand written letters are accepted." 137072 1 in 12 Turnout

250.00 Reference Post, Structures etc. with enamel paint of approved make with 2 coats of different colours & letters, as directed by Engineer in-charge." 137081 Kilometre & Gradient post

Each WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

250.00 etc. per station.

450.00 Boards, Structures etc. along track with enamel paint of approved make with different colours & letters, as directed by Engineer incharge." 137101 Bridge Board

General Jurisdiction Boards, Structures etc."

50000.00 tamping and posttamping work for tamping track with all types of rails, sleepers & sleeper density by various Track Tamping machines, like CSM,DUO/3X Machines which include : (1) Re-adjustment o f ballast, heaping-up of ballast, fillingup of cavities i n tamping z o n e b y picking ballast from stacks / shoulders / crib of adjoining track up to lead of 50 m to ensure effective packing; (2) Clearing of ballast on sleepers to make them visible to operator, (3) Clearing of ballast over rail foot to facilitate holding of rail by rollers of T T R M ; ( 4 ) D i g g i n g , s c r e e n i n g and replenishment of ballast at mud pumping / rounded ballast in sleeper crib location; (5) Tightening of loose fittings immediately before & after tamping; (6) Replacement of broken / missing fittings s u p p l i e d b y R a i l w a y ; ( 7 ) Correcting displaced sleepers to position along with squaring; ( 8 ) Re-setting of worked-out / fallen fittings; (9) Removing and re-fixing joggled fish plates & wooden blocks, wherever necessary; (10) Manual consolidation of ballast in c r i b / shoulders; (11) Removing and refixing of t r a c t i o n bonds during t h e block in electrified sections (12) Dressing of ballast Note: 1. Tamping blocks are not identical & it may be given at a n y time either during d a y o r night. 2 . Stages of payment a) 30% of the rate will b e paid o n completion o f pre tamping attention, b) Balance 70% of the rate will be paid on completion of post tamping. 3. Recovery at the rate of twice the above applicable rate will be effected i n case c o n t r a c t o r fails to carry out pre/during/post operation. 4.Payment shall be made only once in irrespective of numbers of T T R M packing r o u n d and after restoration of normal speed and restoration of complete ballast profile." 155011

10000.00 over slab bridges during machine packing with all contractor's m e n and materials duly removing fittings, leading guard rails t o bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

25.00 t a m p i n g a n d posttamping w o r k s for tamping of Turnouts o f a l l types Under Traffic Block Conditions which include : (1) Re-adjustment o f ballast, heaping-up of ballast, filling-up of cavities in tamping zone by picking ballast from stacks / shoulders / crib of adjoining track up to lead of 50 m to ensure effective packing; (2) Clearing of ballast on sleepers to make them visible to operator; (3) Clearing o f balla st o v e r r a i l f o o t to facilitate holding o f r a i l b y rolle rs of U N I M AT ; ( 4 ) D i g g i n g , s c r e e n in g and replenishment of ballast at mud pumping / rounded ballast in sleeper crib location; (5) Tightening of loose fittings including check rails immediately before & after tamping; (6) Replacement of broken / missing fittings supplied by Railway; (7) Correcting displaced sleepers t o position a l o n g w i t h s q u a r i n g ; ( 8 ) Re-setting worked-out / fallen fittings; (9) Removing a n d re-fixing joggled fi s h p l a t e s & w o o d e n b l o c k s , O H E b o n d s & other obstructions, wherever necessary ; (10) Removing and re-fixing stretcher bar, as directed ; (11) Adjustment i n opening and housing of switch f o r testing operation o f p o i n t s (12)Manual consolidation o f b a l l a s t i n cribs and shoulders; (13) Stages of payment a) 30% of the rate will be paid on completion of pre tamping attention, b) Balance 70% of the rate will b e paid on c o m p l e t i o n o f p o s t t a m p i n g ; (14) Re c o v e r y a t t h e r a t e o f t w i c e the applicable rate w ill be effected in case contractor fails to carry out any of the pre/during/post operation." 156011 1 in 8½ Turnouts (Under Traffic Block Conditions)

25.00 Conditions)

10.00 Conditions)

125.00 all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)" 161011: 60 Kg - 110/90 UTS - Outside Track

1000.00 from cess to BFR / BRH wagons and vice- versa by jib crane attachable to BFR / BRH for handling concrete sleepers with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge." WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

120000.00 concrete sleeper track by Hand Held Off Track Tamper (Power Pack Version) with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge. Off-track tamper (Power Pack Version) will be as per RDSO Specification No. TM/SM/OTT/320, dated 28.01.2009.

50.00 sleepers with fittings from the running track under traffic block for TBTR & stacking the same neatly at specified places with contractor's tools & labour, as directed by Engineer incharge."

50.00 Circuited area including handling of released PVC washers on bolts and extra rubber pads on sleepers"

50.00 sleepers with all Railway supplied fittings complete for TBTR work to specified gauge under traffic block with contractor's tools including aligning, levelling to make track fit for 20 kmph speed and as directed by Engineer in- charge. Note: Transportation of track material if supplied beyond 250m of bridge approaches, shall be paid separately under relevant item."

50.00 Circuited area including handling of released PVC washers on bolts and extra rubber pads on sleepers."

of /broken/corroded isolated Steel Channel/H-beam sleepers with Railway supplied steel channel sleeper with its fittings during traffic block by removing the guard rail and foot path plates with its fittings and loosening of adjacent sleepers hook bolts and lifting of track to required height for removal of old sleeper and insertion of new steel channel sleeper with all fixtures including fixing GR/ER pad in position with epoxy adhesive to neat gauge without disturbing alignment of the track as a whole using with contractors own non infringing jacks and labour, consumables, wooden packings and refixng back in position guard rails and foot path plates along with fittings and tightening of loosened hook bolts etc as a complete job as directed by Engineer in charge at site. The rate includes trucking of new steel channel sleepers and its fittings from bridge approaches and trucking back released steel channels and its fittings to bridge approaches/ nominated locations." 193011 Broad Gauge Track WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

3.00 144458.62 Channel Sleepers made from ISMC 150mm x 75mm / 175mm x 75mm / 200mm x 75mm standard rolled section conforming to IS:2062 as per RDSO approved drawing No 1636/R1/R2 with latest crrection slips complete and as directed by Engineer In charge. Note: Cost of Steel fittings and GRSP shall be paid separately"

1000.00 of RDSO drawing no B/1636/I/R2 from approved sources of RDSO and replacement with old crushed rubber pads of 10mm thickness and fixing by approved adhesive on steel channel sleepers on bridges complete, as directed by Engineer Incharge."

1500.00 /Stainless Steel chequered plates between guard rails on un-ballasted deck bridge for gang pathway, overlapping at regular intervals of 2m to 2.5m with bolts duly drilling holes in chequered plate, as directed on new bridge or replacement of existing gangway on old bridge including removal of old chequered plates and stacking near approaches of bridge clear from all infringement.. Note: Overlapping of chequered plates shall not fall in between sleepers." 195041 MS chequered plates 6 to 8mm thick on new bridge

2000.00 fittings i.e. hook bolts, running rails bolts, guard rail bolts on girder bridges with contractor labour tools, plants etc., including oiling, greasing of fittings complete and as directed by engineer in charge. Note: Before execution of work specific approval of ADEN to be obtained by duly indicating the locations with specific reasons along with date of last tightening done."

850.00 28mm dia. & 320mm long as per RDSO Drg. no. BA-1636/I/R2 from RDSO approved sources. As per direction of Engineer-in-charge"

500.00 Grooved Rubber Pads as per drg. No. RDSO/T-5199 & RDSO's Spec. no. IRS-T- 47-2006 (Prov.) from RDSO approved sources with all contractor's lead, lift, labour, tools, plant and transportation etc. complete as instructed by Engineer incharge. Note: One set constitutes two nos. As per direction of Engineer-in- charge"

500.00 Pads 25mm / 30mm thick as per RDSO drawing No. B/1636/I/R2 to suit Insulated steel channel sleepers from RDSO approved sources with all contractor's material, lead, lift, labour, tools, plant and transportation etc. complete and as instructed by Engineer in-charge. Note: One set constitutes two nos." WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

and Galvanised MS Inner and Outer Clips for Steel Channel Sleeper (RDSO Drg. No. T- 6150 & T-6151) from RDSO approved sources. Note: One set constitutes two inner & two outer clips."

200.00 Beam sleepers of 52/60Kg Rails procured from RDSO approved firms as per RDSO approved drawing with up-to-date correction slips and specifications with all contractor's lead, lift, labour, tools, plant, transportation etc. complete as per instructions of Engineer in-charge. Note: Complete fixture for 1 sleeper shall constitute 1 set."

fabricating supplying retro-reflective Engineering Indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro- reflective sheeting conforming to type-IV of ASTM-D4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by Engineer In- charge or as per IRPWM guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of size 25mm x 2 5 m m x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non- peelable weatherproof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. Vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed." 202021: Caution Indicator Board of size 1400mmx400mm with back support frame fixed t o vertical p o s to fM Sa n g l eo f size 50mmx50mmx6mm of 3650 mm long

8.00 triangular shape having each s i d e of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long

8.00 1400mmx400mm w i t h back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long

8.00 shape having diameter o f 1000mm with bac k support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long WDFC FIELD UNIT-AHEMDABAD-CIVIL/WDFC

8.00 Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately)"

125.00 Engineering Indicator Board or any other board at specified locations without causing infringement to track etc. complete and as directed. 211021 For erection

of miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. 211201: JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity

250.00 Carry crane o f 12T capacity for misc. works of handling of material

750.00 transportation or other misc. works.

2500.00 b y t h e Engineer i n charge, f o r various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. a s p e r specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Officer in charge. 82 Lump Lumpsum 1.00 3000000.00 3000000.00 Misc. items USSOR 2021 Sum Total 86587045.45

Item Breakup - B-NS Items