Construction of Rest House Under R & B (P) Sub Division Dhanera at Dhanera, Ta. Dhanera, Dist.Banasakantha

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

1 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 660.00 Cu.m 122.94

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

2 and disposing of the excavated stuff as directed with in all lead & Lift (B) Dense or Hard soil. 214.00 Cu.m 157.16

Excavation for foundation 1.50mt. to 3.0 mt. depth including sorting out and stacking of useful

3 materials and disposing of the excavated stuff as directed with in all Lead & Lift (C) Hard Murrum 336.00 Cu.m 287.21

Filling foundation and plinth with sand under floors including watering, ramming and consolidating

4 dressing etc, comp. 86.00 Cu.m 444.75

Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not

5 exceeding 20cm. In depth consolidation each deposited layer by ramming and watering. 712.00 Cu.m 136.71

6 watering, ramming and consolidating etc. comp. 104.00 Cu.m 282.07

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075% concentration by mass) is

7 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of 515.00 Sqm 80.84

surface is recommended as per I.S

Providing and laying controlled cement concrete M-150 and curing complete excluding the cost of

8 form work and reinforcement concrete work in:(a) Foundation footing base of column and mass 62.00 Cu.m 4137.97

Providing and laying controlled cement concrete M-250 and curing complete including the cost of

9 form work but excluding the cost of reinforcement concrete work in Foundation footing bases of 187.00 Cu.m 4617.72

Providing and laying controlled cement concrete M-250 and curing complete including the cost of

10 form work but excluding the cost of reinforcement concrete work in Column upto floor two level. 48.00 Cu.m 7128.58

Upto ground level.

Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse sand : 6 graded B.T stone

11 aggregate 20mm nominal size) Curing comp. including cost of form work in foundation and plinth. 138.00 Cu.m 3247.28

Providing and laying Controlled cement concrete M200 using B.T. stone aggregate and curing etc.

12 complete including the cost of form work but excluding the cost of reinforcement. (a) Column for All 45.00 Cu.m 9046.79

Providing and laying Controlled cement concrete M 250 using B.T. stone aggregate and curing etc.

13 complete including the cost of form work but excluding the cost of reinforcement for (c) PLINTH 53.00 Cu.m 5897.39

BEAM having cross sectional area more than 0.12 sqm

Providing and laying controlled cement concrete M-150 and curing complete including the cost of

14 form work but excluding the cost of reinforcement for reinforced concrete work in Plinth PLINTH 43.00 Cu.m 4343.00

Providing and laying controlled cement concrete M-200 and curing complete including the costof

15 form work but excluding the cost of reinforcement for reinforced concrete workn in Wall caps / 5.00 Cu.m 6270.08

Coping / Lintel bends Ground Floor.

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

16 form work but excluding the cost of reinforcement for reinforced concrete work in BEAMS For All 43.00 Cu.m 6522.60

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

17 form work but excluding the cost of reinforcement for reinforced concrete work in LINTELS All 13.60 Cu.m 7650.53

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

18 form work but excluding the cost of reinforcement for reinforced concrete work in CHHAJJAS All 2.30 Cu.m 6800.79

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

19 form work but excluding the cost of reinforcement for reinforced concrete work in slabs for All Floor. 97.00 Cu.m 6466.47

Providing and laying controlled cement concrete M-200 using B.T. stone aggregate and curing

20 complete including the cost of formwork but excluding the cost of reinforcement for reinforced 3.00 Cu.m 9277.87

cement concrete work in staircases for all floor

Providing T.M.T. bar FE500/500D reinforcement confirmed to for R.C.C. work including bending,

21 binding, and placing. In position comp. Up to floor two level. For All Floor 74970.00 Kg 77.36

Brick work using common burnt clay building bricks having crushing strength not less than

22 Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. 85.00 Cu.m 4214.33

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

23 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 189.00 Cu.m 4508.22

two level ( for all floor ) Conventional

Half brick masonary in common burnt clay building bricks having crushing strength not less than

35kg./sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia mild steel round

24 bars every three coarse embedded in cement mortar in superstructure for Ground floor 80.00 Sqm 750.76

(Conventional)

Providing and fixing 12mm thick (tuffen) glass partition wall and rough surface with neccessay fitting

25 and fastening etc. Complete. 10.00 Sqm 4040.00

Providing and fixing door Double shutter having factory fabricated std. Extruded aluminium colour

anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion

of door frame shall be filled with wood to be insert for durable grip of door hinges, with 5cm x 15cm

size style and 5cm x 5cm size rails with 6mm thick water proof ply both side and both side pre

26 laminated with 6 Lever Mortice lock , SS Aldrop 30cm long, SS Handle size 60 Cm Long, Tower Bolt 22.00 Sqm 10497.94

size 30 cm and floor spring etc. as per detail colour & pattern approved by this office including

necessary anodized alluminum fixtures and fastenings.

Providing and fixing door Single shutter having factory fabricated std. Extruded aluminium colour

anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion

of door frame shall be filled with wood to be insert for durable grip of door hinges door Single shutter

38 mm.thick flush door teak wood beading 75 x 35mm including both side in situ laminate with

27 18mm thick granite frame 6 Lever Mortice lock , SS Aldrop 30cm long, SS Handle size 15 Cm Long, 24.00 Sqm 4972.23

Tower Bolt size 20 cm etc. as per detail colour & pattern approved by this office including necessary

anodized alluminum fixtures and fastenings.

Providing and fixing door Single shutter 35 mm.thick flush door teak wood beading 75 x 35mm

including both side in situ laminate with 18mm thick granite frame SS Handle size 15 Cm Long,

28 Tower Bolt size 20 cm etc. as per detail colour & pattern approved by this office including necessary 16.00 Sqm 6370.07

anodized alluminum fixtures and fastenings.

Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System E (30mm)

series sction memebers THREE track window section bottom track 20928, frame top & side

shutter frame top rail & bottom rail 20993, side rail 20549, lock rail 20550 with 5mm thick

29 transparent Tinted float glass, with transparent silicon sealant with allu. anosized coated fittings and 30.00 Sqm 2622.97

fixture etc complete.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @

Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze

30 colour tinted float glass as details etc complete for Fix window. 2.00 Sqm 1525.00

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @

31 Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted 6.00 Sqm 1175.56

glass as details etc complete for Ventilation {Colour as directed by Engineer in charge except black &

Providing andsection andstandard

fixing glass GI Chanel frame for ventilation with fixed louvers 114mm wide

G.I.sheet with thickness of 0.55mm & wt. not less than 400gm per meter roll formed to create 84mm

32 wide louver snap fixed on special shaped GI channel. Fix louvers & Channels shall finished with 32.00 Sqm 2047.27

powder coating of 55microns etc. complete.

Providing and fixing 18mm thick Cement Fibre sheet with CNC Cutting as per design or Engineer

33 incharge with fixing on M.S. Pipe 50 mm sqaure pipe with necessary tools and materials etc. 24.00 Sqm 2558.33

Providing and fixing Safty grills of required pattern for windows Rectangular CRC pipes of size 50 x

30 x 2mm at required spacing as per design including fixing rat mesh and hold fasting with coach

34 bolts including one coat of primer and two coats of mattfinished oil painting etc complete. 900.00 Kgs. 111.40

Providing and laying Machine cut, Free edges, Machine polished Granite stone slab 18 mm

(Average) thick {Single piece not more than 150 cm } for stair steps and riser as per design incl. full

moulded round front edge & 1 cm nosing & necessary groobe on trade of steps laid on 20 mm thick

cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry including rubbing

and polishing etc. complete

Providing and laying machine polished machine cut Blue Kota stone slab ( 60 x 45cm Size) flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

36 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 16.00 Sqm 1018.88

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished Blue kota stone slab 25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

37 cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. 2.00 Sqm 1130.79

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and laying Double Charged Vitrified tiles 8 to 10 mm thick , 80 x 80 in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

38 finishing with flush pointing in white cement. etc. complete as per directed. 66.00 Sqm 1638.22

Providing and laying Double Charged Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand ) and jointed with white cement

39 slurry etc. complete as per directed. 5.00 Sqm 1698.82

Providing and laying Double Charged Vitrified tiles 8 to 10 mm thick , 60 x 60 in flooring treads of

40 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 105.00 Sqm 1308.96

finishing with flush pointing in white cement. etc. complete as per directed.

Providing and laying Double Charged Vitrified tiles 8 to 10 mm thick , 60 x 60 in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand ) and jointed with white

cement slurry etc. complete as per directed.

Providing and laying 60cm x 60cm matt finished GVT tiles in flooring treads of steps and landing

42 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 159.00 Sqm 1120.36

pointing in white cement. etc complete as per directed.

Providing and laying 60cm x 60cm matt finished GVT tiles in skrting risers of steps and dedo on

43 10mm thickcement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry. etc 10.00 Sqm 1195.02

complete as per directed.

Providing and laying 60cm x 60cm antiskid ceramic tiles flooring laid on a bed of 12mm thick cement

mortar 1:3 (1 cement, 3 sand ) finishing with flush pointing in white cement with 3mm groove epoxy

44 grouting as per architect's drawing, design and pattern of approved colour, shade etc complete as 159.00 Sqm 987.14

Providing and laying 60cm x 120cm antiskid ceramic glazed tiles in skirting / dedo on a bed of 10mm

thick cement mortar 1:3 ( 1 cement, 3 coarse sand) with 3mm groove epoxy grouting as per architects

45 drawing, design and pattern of approved colour, shade etc complete as directed. 49.00 Sqm 1000.51

Provding and filling the joint with epoxy grout 3 mm width and 8 to 10 mm deep, including cost of

necessary materials, PVC spacers, filling grout and cleaning etc complete as directed by engineer in

charge. { Colour and Pattern as directed by engineer in charge.}

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

47 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with 214.00 Sqm 701.90

sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm

C.C. 1:2:4 ( 1 Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for maintaining

slope for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one

or more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

containg one Kg. of water profing materials per bag of O P C at plain or / and slops and to be

48 tempered to bring mortar ceramic up to surface with using white cement and colour pigment 479.00 Sqm 1085.75

including rounding of junctions and extending them up to 15 cm along the wall and curing with

bends any pattens or design as per drawing and cleaning by using oxalic acid etc complete.

Providing and laying Mirror polished Machine polished Grenite stone slab 18mm (Average ) thick for

doors & windows sill & Jams clading as per design including full moulded round front steps & 1cm

nosing & necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement :

coarse sand ) jointed with gray cement sluury including rubbing and polsihing etc. complete.for

Doors / windows sill & jams clading.

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

50 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse 1658.00 Sqm 288.44

sand) finished with trovel including scaffolding curing etc. complete. For Ground Floor

Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the

Brick.masonary and reinforcement cement concrete member including fixing materials scaffolding

labour etc. complete

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface free from mortar dropping

52 and other foreign matter and sand papered smooth. 1658.00 Sqm 40.59

Wall painting with Applying two coats of putty & two coats of primer of approved brand (three

coats) plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give

53 an even shade including throughly brushing the surface free from mortar droppings and other foreign 1658.00 Sqm 125.73

matter and sand papered smooth.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

54 1:1 (1-cement : 1-sand) with 1cm x 1cm groovs as per pattern sample approved by the engineer 746.00 Sqm 320.70

incharge etc. complete.

Providing and fixing 90 cm high Stainless steel railing made from anticorrocive S S pipe of 50 mm

dia (16Gauge) as hand rail with S S 38 mm dia (16Gauge) as a vertical support fixed in RCC slab at

55 1.2m c/c including three horizontal S S pipes of 25 mm dia (16Gauge) at eqal distance fixed by 16.00 Rmt 3144.13

18.75 mm dia (16Gauge) S S pipe including accessories as per detailed drawing as directed etc.

complete.(316 grade S.S.)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

56 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 135.00 Rmt 72.65

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

57 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 110.00 Rmt 91.84

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials. [B] 25mm dia.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

58 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 40.00 Rmt 148.12

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.[D] 40 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

59 fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. 76.00 Rmt 170.36

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

60 fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. 58.00 Rmt 253.82

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

61 fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. 80.00 Rmt 447.72

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

62 fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (B) 8.00 Nos 373.70

25mm dia.,

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C)

40mm dia.,

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

64 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 60.00 Rmt 933.05

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete with special flange compression type fittings, wall

65 clipsetc. including making good the wall ceiling and floor.(A) 110mm dia. 97.00 Rmt 339.05

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

66 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 124.00 Rmt 1053.73

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x

67 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 80.00 Rmt 834.38

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing M.S. clamp made from 40mm x 6mm thick M.S. flat as per design given by

Engineer in charge foor fixing the C.I./ G.I. / PVC on wall of duct to stay away from wall etc.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with C.I scread down or hinged grating including

69 the cost of cutting and making good the walls. 15.00 Nos 733.26

Providing and fixing Jaguar ALICHR85079k, ALD-179 Brass complete Divertor set , silver crome

finish divertor outer body of high flow single lever concealed mixer & divertor for bath & Shower

70 system with divertor assembly & cartridge sleeve inclusive exposed parts kits hindware make or 5.00 Nos 10423.20

equivalant make complete as ditrected by engineer in charge

Providing and fixing Spout heavy duty of following size Brass chromium plated (i) 15mm dia. (

71 Hindware, Plumber, Mark, Escco or equivalent brand ) 5.00 Nos 3827.90

Providing and fixing AKP- 35753P Toilet paper Roll holder with Flap of Jaguar or equivalent brand

72 as directed by Engineer in charge including fixing as and where directed etc. complete.(A) C.P. Brass 5.00 Nos 2003.84

Providing and fixing Flush cock Metropole heavy duty of following size (A) Brass chromium plated

73 ( Plumber, Mark, Escco or equivalent brand ) 5.00 Nos 915.06

Providing and fixing C.P. Brass health faucet hindware showers F-16 0013 with cleaning system

1.25mt. Long P,V.C. flexible tubes and ABS wall hook with angular stop cock hundware plazza F-18 Nos

003 with extension nipple 62mm log etc. complete.

Providing and fixing AKP-35731P Soap Dish Holder of jaguar or equivalent brand as directed by

Engineer in charge including fixing as and where directed etc. complete.

Providing and fixing AKP-35735P Soap Dispenser with glass bottle of jaguar or equivalent brand as

76 directed by Engineer in charge including fixing as and where directed etc. complete. 6.00 Nos 2033.13

Providing and fixing screw down quarter turn heavy duty bib taps of following size (A) Brass

77 chromium plated screw down bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent brand ) 2.00 Nos 785.78

Providing and fixing C.P. brass shower rose heavy duty with 15mm or 20mm inlet.(A) 200mm dia.

78 Each 5.00 Nos 919.10

Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with

79 screw, shanks and back nuts (A) 15 mm dia {Long pipe or equivalent brand} 7.00 Nos 930.21

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or

M.S brackets painted white including cutting cutting holes and making good the same including C.P.

80 brass waste and waste pipes and bottal trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 5.00 Nos 1890.72

400mm size.In colour.

Providing and fixing Wall Mounted Water Closet with integral "P" and "S" trap including jointing

the trap with soil pipe in cement mortar 1:1 (1-cement, 1-sand) of approved brand including seat

cover for wash down WC with CP brass hinges and rubber buffers including providing 12.50 Litres

low level flushing cisten with a "P" pair of CI or MS bracket with complete fitting such as lead valve

Sipron 15mm dia brass ball valve with polythene float CP brass handle, unions and couplings for

81 connection with inlet outlet and overflow pipes 40mm dia porcelain enamelled flush bend, including 5.00 Nos 23107.79

Health Faucet operated with necessary valve of approved make including cutting holes in walls and

making good the same connecting the flush bend with cistern and closet etc. complete.(Brand of All

parts to be approved by the Engineer In-charge)

Providing and fixing Special Needs Range CRUSE SET, EWC, 710 x 370 x 810 mm, New Cat No:

S1021113 S Trap, S1021114 P Trap, S1060106 Cistern, B1520118 Soft Close Seat Cover,

B1810112 Twin Flush Fittings, S2040101 Wash Basin 510 x 400 mm, F9030451 Spatula Lever

basin mixer, B2210106 Wall mounted Grab bar 600 mm long, B2210106 Wall mounted Grab bar

600mm long, B2210108 Wall mounted Hinged rail 750 x 750 {Cera or equivalent} as

directed by Architect Office {SUGAMYA BHARAT Instruction}

Providing erecting and fixing double coated 4-layer tough virgin plast ISI water tank of required

83 capacity each with all necessary fittings and connection etc. complete on terrace. 3000.00 Litre 9.54

Providing and fixing Art Street frameless wall mirror for bathroom bevelled frameless wall mirrior

84 (16 x24 inches silver ) etc. complete. 6.00 No 3194.63

Providing and fixing Towel Rack : AKP-35781P of jaguar or equivalent brand as directed by

85 Engineer in charge including fixing as and where directed etc. complete. 8.00 No 3659.23

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

86 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 8.00 No 1246.92

150mm x 100mm size P of R type

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing CP brass screw down stop cock of approved quality 15mm size with adjustable

87 wall flange..or as per instrction of engineer incharge. 20.00 No 205.83

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

88 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 8.00 No 2932.93

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

89 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 12.00 No 3660.76

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or

two inlets.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse

90 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 6.00 No 7180.44

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(iii) Inside dimensions 600mm x 850mm and 450mm deep for pipe lines with three

or more inlets

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

91 watering, remming and consolidating etc. complete. 3.00 Cum 621.46

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

92 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of 746.00 Sqm 73.83

loose powdered materials.etc complete

Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 25 mm thick

Kota stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges with waterproof

rigid adhesives including macking necessary grooves in walls with Vertical Kotastone 30 mm x

93 No sandwitch thick every 60 cm centre to cenre including all labour material of approved quality 6.00 Sqm 9206.15

incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and fixing stainless steel kitchen sink glossy ASIS 304 grade and 1 mm thick with overall

size 510mm x 432mm x 330mm deep having bowl size 410mm x365mm x 165mm of Nirali or

94 equivalent brand with all fittings CI or MS brackets painted white or fixing on stone base including 2.00 Nos 1275.63

cutting holes and making good the same brass valve and fisher union fitting including all necessary

Constructing Washing Platform 18mmm thick Polished Black Granite at top and 25 mm thick Kota

stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges with waterproof rigid

adhesives including macking necessary grooves in walls with Vertical Kotastone 30 mm x 2 No

95 sandwitch thick every 60 cm centre to cenre including all labour material of approved quality incl. 2.00 Rmt 8911.23

full moulded round front edge fixed in wall for partition and jointed with grey cement slurry including

cutting and fixing wash basin including rubbing and polishing etc. complete

Providing thoruting or plaster drip and moulding to R.C.C. chhajja. Rmt

Providing 12mm wide groove throating / notch in plaster including finishing the same etc. complete

for all height.

Providing and fixing 18MM TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH

BOTH SIDE LAMINATE & PVC BEADING ON PERIPHERY and Providing and Fixing Stainless

Steel (Grade -316) accessories, sheet cutlery basket (2 Nos), Thali Basket(2 Nos), Plain Basket(2

nos), Cup Saucer Basket (2 Nos) of size 520 x 485 x 100 mm fixing on telescopic channel (GODREJ

98 OR EQUIVALENT) having hardware like handles, dead lock, magnet etc with fixing all expose 3.00 Sqm 22361.40

surface are decoartive laminate sheet and other inner surfaces are 1.0 mm thick lamiate including all

necessary fixture and fastening ( Steel handle, hinges, stopper , chains and locking arrangement etc.

complete as directed by Engineer-in-charge.

Providing and fixing in position 300mm high , 150mm wide englsih letter made from 1.0mm thick

99 stainless steel sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 30.00 No 707.00

Providing and fixing in position 150mm high , Englsih letter made from 1.0mm thick stainless steel

100 sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 80.00 No 404.00

Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone

101 aggregate 40mm nominal size) and curing complete excluding cost of form work in :(a) Foundation 10.00 Cum 2653.42

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

102 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 46.00 Cum 4496.05

two level ( for G.F ) Conventional

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing mild steel door with 40 x 40 x 6 mm angle for frame and for shutter frame 30 x

30 x 3 angle. For windows frame of angle 35 x 35 x 5 & for shutter windows 25 x25 x 3 mm size

angle and 18 gauge sheet for panels & 10 mm dia bars at 10 cm c/c for grill and 40 x 6 mm flats on Kgs.

edge of shutter, & 20 x 6 mm binding patti, including one coat of primer and two coats of oil painting

etc. comp. as per detail / as directed by Engineer in charge.

Providing 15mm thick cement plaster ( Mala Trowel finish) in single coat on brick/concrete walls for

104 interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1- 319.00 Sqm 215.65

cement:4-sand) for Ground Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

106 1:1 (1-cement : 1-sand) etc. complete. 344.00 Sqm 320.70

Providing 20 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall

for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-

107 cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement 37.00 Sqm 246.84

mortar in proportion recommended by the manufacturer for All Floors.

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed

108 of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white 11.00 Sqm 955.41

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

109 cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 37.00 Sqm 1030.57

Providing and laying hand dressed polished blue Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey

cement slurry including rubbing and semi miror polishing with emery No. 600 etc. complete. (A)

25mm thick

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on

111 undecorated wall surface to give an even shade including throughly brushing the surface free from 111.00 Sqm 125.73

mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

112 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of 566.00 Sqm 73.83

loose powdered materials.etc complete

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

113 cement finishing, watering etc. complete. 14.00 Rmt 24.28

114 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 2.00 No. 958.17

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall

115 with the help of clamp at every two metre C/C or shall be concelled as directed including necessary 90.00 Rmt 195.67

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.[E] 50 mm.

116 Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 50mm dia. 2.00 No. 808.00

Providing and laying Controlled cement concrete M200 using B.T. stone aggregate and curing etc.

117 complete including the cost of form work but excluding the cost of reinforcement. (a) Column for 7.00 Cum 9046.79

Ground floor.

Providing and laying ordinary cement concrete M200 using B.T. stone aggregate for R.C.C. coping

118 curing etc. complete including the cost of form work but excluding the cost of reinforcement. 4.00 Cum 5652.97

Providing and fixing M.S.Compund gate of required pattern to fix on wall as per given detailed

119 drawing using M.S. flats, M.S. Square bars, Cast iron decorative pattern and fixing with necessary 675.00 Kgs. 160.85

required nuts, bolts and welding works etc. comp. ( B) Ornamental

Painting two coats including priming coat on new steel and other meatl surfaces with enemal paint

120 brushing interior to give an even shade including cleaning the surface of all dirt, dust and other 14.00 Sqm 128.13

foreign matter.

Providing , laying animal protector and fixing in position ISMC 125MM x 65MM conformation to IS

: 2062 M.S. channel section as main frame including providing and fixing 50MM dia G.I. pipe "C"

Class 1st guid (IS 1239-Part-1) Zindal or equvivalent in parallel to road direction as per given

drawings and design including excavation the trench 6.00M x 1.80M x 0.75M, P.C.C. 1:2:4 (1 cement

121 : 2 sand : 4 graded stone aggregate).0.30M x 0.45M size R.C.C. Beam alaround with Fe-500 T.M.T. 6.00 Rmt 23636.02

bar reinforcement as per design, 75mm dia UPVC pipe etc. Complete with required all tools, welding,

pipe, M.S. Cleats, redoxide to M.S. channel framing as direction by engineer inh charge and as per

given drawing and design.. etc. complete as per directed.

Providing water harvesting pit 2.40 mt dia x 2.40 mt depth with excavation in any strata filling the pit

with brick bats in 0.60 mt depth, 0.30 mt with 25mm to 40mm kapchi 0.30 mt with 10mm to 20mm

122 kapchi & 2.00 mm depth with coarse sand in layer including maing the lines (PVC) for water inlet 2.00 Nos. 77985.13

etc. as directed including 250mm dia bore work with 6" PVC" pipe upto 35mt etc, comp.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying & installing of Dry Chemical Powder type 6 Kg. Capacity fire extinguisher as per I.S.

123 ISI. Mark with necessary fittings etc. complete. 4.00 Nos. 2222.00

Providing Carben doxide type fire extinguisher 4.5Kg. Capacity with I.S.I. Mark and test certificate

124 of explosive deprtment of Nagpur 4.00 Nos. 5706.50

Providing and laying ordinary cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone

125 aggregate 20mm nominal size) and curing etc. complete including the cost of form work but 1.00 Cum 3638.79

excluding the cost of reinforcement.(a) Footing.

Providing and laying Controlled cement concrete M200 and curing etc. complete including the cost of

126 form work but excluding the cost of reinforcement for R.C.C. work in SLABS 12 cm thickness. for 1.00 Cum 6466.42

Ground Floor

Providing T.M.T. bar reinforcement for R.C.C. work including bending, binding, and placing. In

127 position comp. Up to floor two level. 90.00 Kgs. 77.29

Box cutting the road surface to proper slope and chamber for making a base for road work including

128 removing the excavated stuff and depositing on the road side slope as directed up to 50 mts. Lead. 297.00 Cum 109.08

Supplying and laying, spreading and compacting coarse clean sharp specified sand (C.B.R. not less

than 10%) below sub base course including carraige of material spreading in uniform layers manually

129 on prepared base and compacted with power roller to achieve desired density including all materials, 54.00 Cum 384.81

labours etc. complete. and spreading coarse clean sand as directed.

Providing & Laying 150mm thick WBM of grade-II in 2 layers each of 75mm using BTMC metal of

size 45 to 63mm in layers including 13% stone screening 13.2mm size and 7% stone dust as filler

130 including spreading, watering, consolidation by vibratory roller as per MORTH specification etc 81.00 Cum 1168.57

complete as directed by Engineer in charge

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

131 formwork and reinforcement for reinforced concrete work in(A) Foundations, footings, Base of 108.00 Cum 4347.04

columns and Mass concrete

Compaction and finishing of cement concrete road by tremix process, providing extra labour charge

for tremix ( Vaccum dewatering service ) process on cement concrete road surface by using vaccum

132 dewatering pump floater surface vibrator including making groove 5mm width and filling with 540.00 Sqm 85.85

polyvynile polymer and rough finish to surface as per instruction including leveling etc. complete.

Providing and fixing junction board of M.S.plates and angles as per standered IRC design including

133 fixing in C.C. 1:4:8 with necessary excavation , painting, figuring and lettering on board etc. comp. 2.00 No. 5236.70

Providing and fixing 150 x 150 x 3.2 mm thick M.S. pipe parking shed post & Rafter & Cross , MS

50 x 50 x 2mm pipe purlines with necessary M.S. plate 8mm hick including cutting , bending

grinding , welding , drilling for nut bolts including painting two coats of oil painting over primer coat

etc. complete.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw

135 and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as irected by Engineer 134.00 Sqm 1441.90

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing

136 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 8.00 Sqm 1120.36

pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on

137 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 2.00 Sqm 1195.02

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i)

Not exceeding 3 Sq.M. in area.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with

139 all lead and lift. (i) R.C.C. work 78.00 Cum 1082.35

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

140 disposal of unserviceable materials with all lead and lift. 435.00 Sqm 49.12

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

141 of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 178.00 Cum 562.89

142 Dismentling steel work including distempering and stacking the materials with all lead and lift. 5436.00 Kgs. 3.85

Disposing of Dismentalled and demolished unsufull materials including loading , carting and

143 disposing to 5.0km from the site and clearing and leveling the ground 69.00 Cum 541.18

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

144 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 96.00 Pt. 582.77

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Bell Point Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor Pt.

Half Point Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

145 box, single mounting base frame covered with textured/metallic/white front plate modules erected on 33.00 Pt. 809.01

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires,

in below type of pipe to be erected complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling Pt

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

147 following type of accessories. 31.00 Pt. 612.06

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f)with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 29.00 Pt. 894.86

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

148 modules erected on / in wall / ceiling with following type accessories 39.00 Pt 309.06

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front

149 plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or 12.00 Pt 725.18

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[B] For Two Gang Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(4) TV Co-axial Socket outlet Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(5) Electronic hum Free steps EME Fan regulator Cat.III Make:- Honeywell, L&T, Crabtree,

Indoasian, M.K, Anchor 6.00 Ea 398.95

(7) Blank Plate Single Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 20.00 Ea 25.25

(8) Computer RJ-45 socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(19) Modular Indicating Call Bell Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K,

Anchor 10.00 Ea 329.26

(21) Foot Light as per colour requirement with concealed box, modular accessories, acrylic glass

cover with suitable LED watt with all accessories as per following module (b) Four modules Cat-III 10.00 Ea 473.69

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

152 Check-nuts etc. complete of following sizes.(1) 20 mm 20.00 Mtr 17.17

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

153 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 160.00 Mtr 78.78

following size (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm Make-

RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB

(b) 2 wire 2.5 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB 564.00 Mtr 104.03

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size Mtr

(A) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm Make- RR Kabel,

Havells, Avocab, KEI, Johnson, Polycab, ADCAB

(h) 4 wire 6 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB Mtr

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & Mtr

control wiring) with required size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

(f) One wire 10.00 sq. mm 25.00 Mtr 115.14

(g) One wire 16.00 sq. mm 10.00 Mtr 177.76

(h) One wire 25.00 sq. mm 10.00 Mtr 295.93

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly -

156 Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC 140.00 Mtr 62.62

insulation.(e) RG-11

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

157 Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following 185.00 Mtr 20.20

size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

(5) Ten Pairs

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

158 [C] CAT - 6 225.00 Mtr 47.47

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard

159 approved with krone strips (a) Suitable for 10 pair 1.00 Ea 994.85

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K,

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light indicating

161 lamp with Red light button to attend the call suitable for 240 v 50 c/s supply to be erected. 10.00 Ea 148.47

Decorative call bell Ting-tong box type 250 volts complete erected

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K

163 to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required 6.00 Ea 165.64

LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

Tube Light with integral driver(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-III

Make;- Jaquar, Wipro, LT, Havells, Luker

(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Make;- Jaquar, Wipro, LT, Havells, Luker 5.00 Ea 373.70

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

164 driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description 113.00 Ea 589.84

wattage capacity between the ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (iii) 16-20 watts, Surge-2

KV Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

(D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral

suitable Driver complete Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker 87.00 Mtr 220.18

(F) Spot Light 425 Lumens, Surge-2KV (ii) 8 to 11 Watts Cat-lll Make;- Jaquar, Wipro, LT,

Havells, Luker 12.00 Ea 1367.54

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Make;- Jaquar, Wipro, LT, Havells,

Luker 9.00 Ea 312.09

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

165 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver 7.00 Ea 6177.16

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

capacity between the ranges shown.)(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection.(iv) 90 - 119 watts Cat-lll Make;-

Jaquar, Wipro, LT, Havells, Luker

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (i)20- 30W Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

166 thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, 5.00 Ea 6790.23

spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III Make- Indoasian, L&T, Schneider,ABB

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal &

167 magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned 2.00 Ea 8861.74

copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Make-

Indoasian, L&T, Schneider,ABB

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Make- Indoasian, L&T, Schneider,ABB

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting

169 with operating mechanism A.C.23 duty confirming to IS for (A)32-40A Cat-lll Make- Indoasian, 1.00 Ea 2611.86

L&T, Schneider,ABB

(D)200A Cat-lll Make- Indoasian, L&T, Schneider,ABB

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current Rn.Mtr

carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.(A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. capacity

0.90 Rn.Mtr 3202.71

Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity erected on

171 existing block board.(vi) 200 A. 500 V. 3.00 Ea. 420.16

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

172 capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 9.00 Ea. 297.95

Make- Indoasian, L&T, Schneider,ABB

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III Make- Indoasian, L&T, Schneider,ABB

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B)

Amp. Cat.III Make- Indoasian, L&T, Schneider,ABB

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp.

Cat.III Make- Indoasian, L&T, Schneider,ABB

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

176 breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp. 2.00 Ea. 702.96

Cat.III Make- Indoasian, L&T, Schneider,ABB

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

177 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of 3.00 Ea 1492.78

MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way Make- Indoasian, L&T, Schneider,ABB

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii)6 way Make- Indoasian, L&T, Schneider,ABB 3.00 Ea 2913.85

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed (ii) 40Amps.

DP Cat. III Make- Indoasian, L&T, Schneider,ABB

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

181 3.00 Sq.Mtr 14902.55

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers

with following size.(B) The standard companies switch gear shall be used and only manufacturers at

CPRI approved factory (i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding,

182 grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of 45.00 Kg 77.77

engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) Make- RR Kabel, Havells, Avocab, KEI, Johnson,

Polycab,ADCAB

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Make- RR Kabel, Havells, Avocab, KEI, Johnson,

Polycab,ADCAB 40.00 Mtr 589.84

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

183 following size of cables 120.00 Mtr 151.50

(B) 4 core 6 Sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab,ADCAB

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all

184 over the run and back filling the same and making the surface as normal ground. 25.00 Mtr 55.55

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying

any size of cable or locating the fault all over the run and back filling the same and making the

surface as normal ground.(B) If additional machinery like hammer driller or JCB use [Add]

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at

186 required depth in existing trench for laying of cable. below ground / road surface for enclosing 38.00 Mtr 95.95

cable (C))90 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 2 to

4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following

188 size of cables. (C) 3 & 1/2 core 70 Sq. mm 2.00 Ea 103.02

(D) 3 & 1/2 core 95 Sq. mm

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

189 plated nut bolts in an approved manner. 56.00 Ea 6.06

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

190 with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be 33.00 Ea 1948.29

approved by Engineer in charge)) Make:- USHA, CROMPTON, HAVELLS, ORIENT

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly

191 painted for fan complete with proper insulation without leakage and earthing. 33.00 Mtr 108.07

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site

192 as original. 33.00 Ea 43.43

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with

193 necessary hook of 10 mm M.S. Round Bar. 33.00 Ea 98.98

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.200mm with 1350RPM Cat.II Make:- USHA,

CROMPTON, HAVELLS, ORIENT

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty

ring mounted low noise operation suitable for medium duty having following dia size and maximum

196 speed in RPM [A] 300-305 mm dia 900 RPMCat.II Make:- USHA, BAJAJ, CROMPTON, 2.00 Ea 2054.34

HAVELLS, ORIENT

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

197 mob & hinged doors as per requirement having locking arrangements with mounting clamp with 9.00 Ea 515.10

nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of

box.(B) 250mm x 200mm x 100mm [deep]

Supplying & erecting approved make Digital time switch having lithium cell 6 yNos.rs operative and

operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also

198 comprised permanent ON/OFF switching. Programming switches & housed in fire proof 1.00 Ea 3168.37

thermoplastic enclosure & transparent cover erected as required with necessary connection erected as

directed.Make- Indoasian, L&T, Schneider,ABB

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction

199 Cat III (C) 4 pole 440V 16 Amp.Make- Indoasian, L&T, Schneider,ABB 1.00 Ea 857.49

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal

slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling

GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet,

public address cord, shall have unrestricted simultaneous dialing facility,QSIG protocol on PRI, 95 /

STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode,

Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call

200 Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base 1.00 Ea 45398.49

ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global

Directory Printing with following capacities [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ][A] No of Extension 16, No of Junctions 6, 8 Port IP Resource in-built,

Port Web base Video Conferencing, No of expandable ports : 48, Operators Console - 01 Compatible

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands

201 free dialing system & 30 memories with display system Single line [[Approved by Competent 7.00 Ea 565.60

Authority i.e. not Below the rank of Executive Engineer ]

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit,

202 water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & 1.00 Ea 54515.76

outlet connection. The body of water cooler will be made from Stainless Steel. and ISI Certified.

Make- VOLTAS, BLUESTAR, USHA

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder

coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high

203 pressure switches with following size of storage tank & LPH capacity & erected as directed 1.00 Ea 29187.99

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container

housed in M.S./S.S./ABS body insulated with glass wool/puff complete with heating

elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers & cementation (A) 10 Ltr. with 3 KW. heating Ea

element Premium Category Make:- Racold,A.o.Smith,Venus,JAQUAR

Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from

G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic water level

205 crimped, main contactor & overload relay, start - stop push buttons, to be erected on angle iron 2.00 Ea 7722.46

frame grouted on wall as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED

display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc

206 .with manufacturers calibration certificate. 2.00 Ea 1275.63

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC

207 erected on existing panel board with all connection, wiring etc .with manufacturers calibration 2.00 Ea 1558.43

certificate.

208 existing panel board with necessary connections. 4.00 Ea 317.14

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden

erected in existing CRCA box duly secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete

erected with necessary connections.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for

three phase submersible motor having

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr

211 head suitable for 50 mm dia delivery pipe Make:- PRIMA, AMRUT, DUKE, LUBI. CROMPTON 2.00 Ea 11807.91

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and

size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with

212 water (D)For Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP 2.00 Per Job 856.48

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size. (B) 3 Core x 2.5 Sq. mm.Make- RR Kabel, Havells, Avocab,

213 KEI, Johnson, Polycab,ADCAB 60.00 Mtr. 104.03

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating

material, water proofing material, & making the joint complete.

Total Tender amount

Rupees One Crore Ninety Seven Lakh Thirty Two Thousand Two Hundred Fourteen And Paise Fifteen Only

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of

my/our tender works out as under.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

* Estimated amount put to tender

Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be made.

2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.

3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.

4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017

as stated i. S.O.R therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted

from the rate of orignal item at the rate of input rate mentioned in all the tender.

5.Credit Amount Rs 69715.80 for Credit for Dismantled materials will be deducted from First Running account bill.

Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.

Deputy Executive Engineer Executive Engineer

R & B (Pan) Sub Division R & B (Pan) Division

Dhanera Palanpur