Stock Storage for Jal Shakti Division Jaisinghpur, District Kangra HP

Providing and fixing 10 mm thick Plaster of Paris (POP) ceiling up to a height of 5.00 m above floor level, over M.S. steel flat strips of size 25 mm x 6 mm, fixed at suitable spacing with 10 mm clear gap between the strips and properly supported/anchored to the soffit, including providing and fixing rabbit wire mesh reinforcement over the steel framework, cutting, drilling, fixing and tying of mesh, application of Plaster of Paris in required thickness, levelling, dressing, jointing and finishing to a smooth and even surface, including all necessary screws, fasteners, binding wire, labour, tools and tackles, scaffolding, carriage, leads, lifts and all incidental charges, complete in all respects as per approved drawings, specifications and as directed by the Engineer-in-Charge."

Providing and fixing 12.5 mm thick square edge PVC laminated gypsum ceiling tiles of size 595 x 595 mm, manufactured from natural gypsum plasterboard conforming to IS 2095 (Part-1), laminated with white 0.16 mm thick fire-retardant PVC film on the face side and 12 micron metallized polyester film on the back side, with all edges sealed with the face-side PVC film which extends around and wraps the edges and is securely bonded to the edges and back-side metallized polyester film, making the tile a completely sealed unit, including providing and fixing the tiles in an exposed/suspended GI T-grid ceiling system comprising main runners, cross tees, perimeter wall angles, suspension rods/hangers, clips, fasteners and all necessary accessories, including cutting and fitting of tiles around walls, columns, services and openings, making necessary openings for light fittings, AC diffusers and other services, providing additional supports wherever required, leveling, alignment and finishing complete in all respects as per manufacturer's specifications, approved drawings and as directed by the Engineer-in-Charge, including all materials, labour, tools and tackles, scaffolding, carriage, leads, lifts and all incidental charges.

Providing, fabricating, supplying and fixing Aluminium Composite Panel (ACP) ceiling/soffit in pan shape, of approved metallic colour and shade, made out of 4 mm thick Aluminium Composite Panel material consisting of 3 mm thick FR-grade mineral core sandwiched between two aluminium sheets, each 0.5 mm thick, the ACP panel being coil coated with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on the exposed face and polymer service coating on the back face, including providing and fixing necessary aluminium/G.I./M.S. supporting framework of approved section, brackets, cleats, stainless steel screws, nuts, bolts, washers, approved fasteners, SS 316 pins wherever required, nylon separators to prevent bi-metallic contact, weather-resistant silicone sealant, backer rods, edge profiles and all necessary accessories, including cutting, bending, forming, fabrication and fixing of ACP panels, treatment of joints and grooves, making necessary openings for light fittings, electrical fixtures and other services, providing additional supports wherever required, proper alignment, level and finishing, complete in all respects as per approved architectural drawings, approved shop drawings, manufacturer's specifications and as directed by the Engineer-in-Charge, including cost of all materials, labour, tools and tackles, scaffolding, carriage, leads, lifts, cleaning and protection of the completed ceiling until handing over.