Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹3.6 L
Closing Date
21 Aug 2026, 10:10 pmClosed
Public Works Department
EE PWD Dharwad
Construction of bridges on Ron Cross to Gudisagar, Naganur, Kadadalli, Kongwada, Datnal MDR at CH 3.80 km, CH 4.70 km, CH 5.30 km, CH 6.10 km and 9.30 km in Navalgund taluk of Dharwad district.
PWD/2026-27/BR/WORK_INDENT37234
PWD/2026-27/BR/WORK_INDENT37234
Open
Bridges/Culverts
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
7 documents required · 7 mandatory
List of existing commitments and ongoing works
List of works for which tenders already submitted
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Work Done Certificates obtained from the Competent Authorities
The Tenderer should be a PWD Registered Class II & Above contractor
To qualify for award of this contract each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 Satisfactorily completed at least 50 Percent of the contract value as prime contractor at least one similar work such as Construction of Bridge works of value not less than Rs.120.37Lakhs.
3.3) Each Tenderer should further demonstrate: (a) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification.1) Concrete Batch mix Plant, 2).Transit Mixer, 3)Excavator like JCB / Hitachi, 4).Tippers , 5)Water Tanker, 6).Shuttering Materials.
Liquid assets and or availability of credit facilities of not less than Rs.80.25 Lakhs Credit lines or letter of credit or certificates from the banks for meeting the fund requirement etc. LOC or Letter of Credit should be in prescribed format as per KW-4 Bid Document. if not attached then the tender will not be accepted
To qualify for the award of this contract each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 executed in any one year the following minimum quantities of work 1). Earth work excavation/ Embankment/Subgrade- 6511.32 Cum, 2) TMT Steel- 38.88 Tonne, 3) PCC/RCC/PQC - 704.51 Cum.
Contact details of contractor Should mention valid Email ID, communication Address, Phone Number
BID Capacity AxNx1.5-B
Total value of civil engineering construction works executed and payments received in the last five years 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 a Achieved in at least Two Financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 481.48 Lakhs. with UDIN number
Annual Turnover Certificate along with profit and Loss account statements ITR Returns UDIN is preffered in Turnover Certificate. From 2021-22 to 2025-26.
Total value of civil engineering works executed and payments received in the last five years (year-wise)
As per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted.
₹5,000
₹3.6 L
14 Aug 2026
14 Aug 2026
24 Aug 2026
20 Aug 2026
20 Aug 2026
Kw-4 Construction of bridges on Ron Cross to Gudisagar, Naganur, Kadadalli, Kongwada, Datnal MDR at CH 3.80 km, CH 4.70 km, CH 5.30 km, CH 6.10 km and 9.30 km in Navalgund taluk of Dharwad district.PWD/2026-27/BR/WORK_INDENT37234
FOR TENDERS upto RS.300.00 LAKHS 392.19
Tender amount 24073854.18 240.74 For Milestone 1: 7222.16 Rs. per day
EMD 1.5% 361107.81 361500 For Milestone 2: 7222.16 Rs. per day
Completion period 9.00 100000 For Milestone 3: 9629.54 Rs. per day
Annual turnover 481.48 261500 239.86
Similar nature work 120.37 59.97 0.00
LOC Liquidity assets 80.25
Estimated quantities 80%quantities
Total Quantity 80% Quantity
Earth work excavation/ Embankment/Subgrade- 6511.32 Cum 6511.32 Cum
TMT Steel- 38.88 Ton 38.88 Ton
PCC/RCC/PQC - 704.51 Cum 704.51 Cum
Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions 80% 15%
1 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 719 754.95 195 147215.25 156.00 0.61
Item Code : 2.8.ii.a 0.00 0.00
Item Description : Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - Lime /Cement Concrete - By Mechanical Means - Cement Concrete Grade M-15 & M-20 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 116.84 921.62 107682.08 737.30 0.45
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
3 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 6778.8 120.18 814676.18 96.14 3.38
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
4 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7418.05 261.99 1943454.92 209.59 8.07
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7846.02 130.1 1020767.2 104.08 4.24
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7846.02 57.73 452950.73 46.18 1.88
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9256.19 139.16 1288091.4 111.33 5.35
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
8 Category : Vol - 1 -Chapter -II- Concrete Works 0 87305 91670.25 19.89 1823321.27 15.91 7.57
Item Code : 2.11.b 0.00 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Foundations of Bridges 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
9 Category : Vol - 1 -Chapter -II- Concrete Works 0 87532 91908.6 18.8 1727881.68 15.04 7.18
Item Code : 2.11.c 0.00 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sub structure of Bridges 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 87758 92145.9 9.91 913165.87 7.93 3.79
Item Code : 2.11.d 0.00 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Super structure of Bridges 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
11 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 2677 2810.85 207.03 581930.28 165.62 2.42
Item Code : 12.4 0.00 0.00
Item Description : Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Ref to MoRT&H : IRC - 710.1.4. of IRC :78 & 2200 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
12 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 1168 1226.4 599.98 735815.47 479.98 3.06
Item Code : 12.3.A 0.00 0.00
Item Description : Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1.4. of IRC :78 & 2200 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
13 Category : Vol - 1 -Chapter -I- Earth Work --- 266 279.3 161.33 45059.47 129.06 0.19
Item Code : 1.9 0.00 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
14 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 6727 7063.35 29.61 209145.79 23.69 0.87
Item Code : 13.8 0.00 0.00
Item Description : PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
15 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 11201 11761.05 59.22 696489.38 47.38 2.89
Item Code : 13.9 0.00 0.00
Item Description : Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 1500, 1600, 1700 & 2704 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
16 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 2126 2232.3 98.82 220595.89 79.06 0.92
Item Code : 13.4 0.00 0.00
Item Description : Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, c/c spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. Ref to MoRT&H : IRC - 2703, 1500, 1600 & 1700 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
17 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 3271 3434.55 24 82429.2 19.20 0.34
Item Code : 13.7 0.00 0.00
Item Description : Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 0.00 0.00
Unit : No 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
18 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 137 143.85 106.8 15363.18 85.44 0.06
Item Code : 13.15.ii 0.00 0.00
Item Description : Filler joint - Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. Ref to MoRT&H : IRC - 2605 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
19 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 138 144.9 73 10577.7 58.40 0.04
Item Code : 12.1 0.00 0.00
Item Description : Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Ref to MoRT&H : IRC - 2706 & 2200 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
20 Category : Vol - 3 -Chapter -14- RIVER TRAINING AND PROTECTION WORKS --- 1912 2007.6 63.45 127382.22 50.76 0.53
Item Code : 14.1.A 0.00 0.00
Item Description : Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid Dry Without Wire Crates. Ref to MoRT&H : IRC - 2503 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
21 Category : Vol - 2 -Chapter -17- Rain Water Harvesting 0 1002 1052.1 230.16 242151.34 184.13 1.01
Item Code : 17.1 0.00 0.00
Item Description : supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
22 Category : Vol - 1 -Chapter -I- Earth Work --- 474 497.7 1534.15 763546.46 1227.32 3.17
Item Code : 1.8 0.00 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
23 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 493 517.65 2559.6 1324976.94 2047.68 5.50
Item Code : 3.6 0.00 0.00
Item Description : Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
24 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2359 2476.95 888.75 2201389.31 711.00 9.14
Item Code : 4.2.B.v 0.00 0.00
Item Description : Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
25 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2559 2686.95 740.63 1990035.78 592.50 8.27
Item Code : 4.17 0.00 0.00
Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
26 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 63 66.15 2962.5 195969.38 2370.00 0.81
Item Code : 5.1.A.i 0.00 0.00
Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
27 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 109 114.45 133.3 15256.18 106.64 0.06
Item Code : 8.10 0.00 0.00
Item Description : Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 803 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
28 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 13087 13741.35 33.72 463358.32 26.98 1.92
Item Code : 13.2 0.00 0.00
Item Description : Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
29 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 10377 10895.85 148.13 1614002.26 118.50 6.70
Item Code : 5.6.i.C 0.00 0.00
Item Description : Bituminous Macadam Grading - I for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Ref to MoRT&H : IRC - 504 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
30 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 14785 15524.25 74.07 1149881.2 59.26 4.78
Item Code : 5.31 0.00 0.00
Item Description : Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. Ref to MoRT&H : IRC - IRC-37:2018 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
31 Category : Vol - 1 -Chapter -I- Earth Work --- 102 107.1 2523.8 270298.98 2019.04 1.12
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
32 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 6213.9 12.3 76430.97 9.84 0.32
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
33 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6799.88 24.75 168297.03 19.80 0.70
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
34 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7192.18 11.88 85443.1 9.50 0.35
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
35 Category : Vol - 5 -Chapter -9- HDPE PIPE WORKS --- 469 492.45 68 33486.6 54.40 0.14
Item Description : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 - HDPE Grade PE80-PN6.0,110mm dia 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
36 Category : Vol - 3 -Chapter -9- CROSS DRAINAGE WORKS --- 9479 9952.95 20 199059 16.00 0.83
Item Code : 9.1.i 0.00 0.00
Item Description : Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . - 1000 mm dia. Ref to MoRT&H : IRC - 2900 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
37 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 25 26.25 2962.5 77765.62 2370.00 0.32
Item Code : 5.33 0.00 0.00
Item Description : Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. Ref to MoRT&H : IRC - 503 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
38 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 4735 4971.75 6 29830.5 4.80 0.12
Item Code : 8.6.A.ii 0.00 0.00
Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. - 90 cm equilateral triangle 0.00 0.00
Unit : each 0.00 0.00
Rate Analaysis Performed ?: Yes 0.00 0.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
road specification.pdf
Tender Document • 1.52 MB
government notification BC LOC letter to be issued by the Bank.pdf
Tender Document • 1.73 MB
37234.xlsx
Tender Document • 0.07 MB
concrete specification.pdf
Tender Document • 0.14 MB
bid document kw-4 wi 37234.docx
Tender Document • 1.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .