SPL REPAIR FOR CONVERSION OF LT OVER HEAD LINE TO UG CABLE INCLUDING CONNECTED ELECTRICAL ALLIED WORKS IN RANGE LINE AREA AND SPL REPAIR/IMPROVEMENT / REPLACEMENT OF BEG VERTICAL TURBINE PUMP TO SUBMERSIBLE PUMP CENTRIFUGAL PUMP AT BEG AND CENTRE ROO

Amount

Labour only for Dismantling existing HT/LT over head line including cross arms and insulators complete all as directed by Engineer-in-Charge for following number of conductors :-

2 Conductors with / without GI wire

3 Conductors with / without GI wire

4 Conductors with / without GI wire

5/6 Conductors with / without GI wire

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area as given below:-

4 Core 10 Sqmm

4 Core 16 Sqmm

4 Core 25 Sqmm

4 Core 35 Sqmm

3.5 Core 50 Sqmm

3.5 Core 70 Sqmm

3.5 Core 95 Sqmm

3.5 Core 120 Sqmm

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 3.0 meter in depth for laying of pipes and for poles/stay and struts not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

Excavation in trenches/post holes in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for laying of pipes and for poles/stay and struts not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus spoil to a distance not exceeding 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and directed.

Supply and laying river sand for cushioning with layers of sand 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified & directed. (Note: Thickness after punning shall be measured for payment)

Supply and laying brick protection cable cover using sub class ‘B’ bricks laid flat adjacent to each other across the length of cable laid dry complete all as specified & directed by Engr-in-charge.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm SDR-21 of 4kgf/cmsq with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

All as per item No 9 above but 95 mm outer dia

M&L for Feeder pillar bus bar box of size of size 600mmx450mm x550mm of outdoor type, double door, both side openable, locking arrangement, kiosk type, powder coated, 3.15mm thick MS sheet water proof hinged, having 4 Nos aluminium bus bar of 400 Amp duly colour coded mounted on porcelain insulator, with provn of 06 Nos outgoings including MCCB 200 Amps, 4 pole, 36 kA,= 01 No, LED indicator (RYB), 08 Nos, holes in bottom for inlet and outlet cable with suitable size of cable gland and mild steel stand for mounting of panel board made of angle iron of size 50 mm X 50 mm X 6 mm, 1.05 metre high (450mm below ground level and 600mm above ground) along with necessary cement concrete for grouting of panel stand and connecting the panel with earthing complete all as specified and directed by Engineer-in-Charge. Locaton :- Different location of New & Old range line and Trg Bn area. Note : (a) Feeder pillar box shall be got fabricated from CPRI approved and shall be from approved list of manufaturer only and depth of panel not less than 55CM. (b) Electric connection between MCCB and Busbar shall be with aluminium strip links duly colour coded. (c) MCCB shall be of make-Havells/Legrand/ABB/C&S (d) Cost of PCC for foundation as approved by Engineer-in-Charge is deemed to be included in quoted rate by the contractor.

Dismantling of HT/LT steel Poles from its existing location and re-erracting the same in its new location with street light bracket and making electrical connection including Earth work and civil works complete all as directed by Engineer-in-Charge. Note :- (i) Soil re-filling and compacting at place of dismanting of existing poles will be done by the contractor and cost of the same is deemed to be included in quoted rate. (ii) The rate quoted shall also included for Earth work, PCC 1:3:6 for foundation and PCC 1:2:4 for coping all as directed by Engineer-in-charge.

Supply & Fixing new steel tubular poles complete with cast iron base plate, final taper, plug, bolts, nuts & washers as specified type 410 SP-31 (9.0 mtr long) including painting two coats of aluminium paint on exposed surfaces to steel tubular pole of 11 mtr including crossarms, Bracket etc including 3 Nos. of strip / bands painted with postoffice red and nevy blue colour (300 mm each) in alternate layer from coaping, marking of pole number with black synthetic enamel paint 2.5 cm height including in 3" dia circle etc complete all as specified and directed by Engr-in-charge. Note :- (ii) The rate quoted shall also included for Earth work, PCC 1:3:6 for foundation and PCC 1:2:4 for coping all as directed by Engineer-in-charge.

Supply & fix PVC Junction box of size 350x250x150 mm with Aluminium bus bars 04 Nos fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40mm X 5mm thick with one No MCB SP 6 Amp capacity includes making suitable hole on pole to take out connections to fitting if required at site and PVC insulated sheathed multistranded copper conductor 3 core 1.5 Sqmm for making connection from junction box to security light fitting complete including provn of cable glands for incoming and outgoing cables all as specified and directed. Make : Syntex/Hensel/Napture.

Supply & fix PVC Junction box of size 250x200x105 mm with Aluminium bus bars 02 Nos fixed on pole with the help of MS nuts bolts and MS clamps-1 Nos of size 40mm X 5mm thick with one No MCB SP 6 Amp capacity includes making suitable hole on pole to take out connections to fitting if required at site and PVC insulated sheathed multistranded copper conductor 3 core 1.5 Sqmm for making connection from junction box to security light fitting complete including provn of cable glands for incoming and outgoing cables complete all as specified and directed. Make : Syntex/Hensel/Napture

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level and covered surrounded from all sides with mixture of charcoal and common salt in alternate layers upto 15cm above top of plate and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber (chamber size not less than 300x300x300mm interier diamentions), RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and directed. NOTE: The unit rate includes earth strip and new GI protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

Supply & Fix / lowering of Power driven Submersible pump set of capacity 25 HP suitable for 60 mtr head 1000 LPM, water cooling type complete with elctric motor of suitable size all as per manufacturer’s design including Supply & Making all fixing arrangement as per site requirement like NRV,flat iron clamp upto 10 to 12 mm thick, icluding making reducer as per pump dia and flange of suitable size and making electrical connection with jointing material complete all as specified and directed . Make :- KSB item code BPDN 302/08+UMAH150-15/23, or equivalent makes as approved by GE. Note : (i) The rate quoted is including Taking out motor & pump keep safe custody and deposit in MES store. (ii)The rate quoted is including of removing unserviceable submerable pump set from site and deposit in E/M store yard. (iii)The rate quoted is including suitable size of Angle iron base/Clamp asm directed mby Enginer-in-Charge.

Supply and fix Centrifugal type monoblock pump set suitable for 415 V, 3 Phase system having capacity 12.5 HP., 1450 RPM Three Phase foot mounted IE2 motor mounted on a base frame total head 19 mtr, discharge capacity 28 L/S including all fixing arrangement like cutting and welding of pipe, fixing of tee/ bend and providing angle iron base for pump set of sutiable size complete all as specified and directed Make : Kirloskar model no HEF43/XV-41or equevalent make as approved by GE. Note : (i) The rate quoted is including Taking out motor & pump keep safe custody and deposit in MES store. (ii)The rate quoted is including of removing unserviceable submerable pump set from site and deposit in E/M store yard. (iii)The rate quoted is including suitable size of Angle iron base/Clamp asm directed mby Enginer-in-Charge.

Supply & Making column pipe with Mild steel cold ERW column pipe 100 mm bore, 10 feet long, 7.20 mm wall thick and threading upto 80 mm from end including supply & fix / welded 10 mm thick mild steel flanged both ends duly drilled for fixing 04 Nos nut bolts & washers and fixing nut bolt of size 75 long & 12mm dia with 02 nos washer and suitable size of rubber gasket, including welding of three Nos 150 mm long 40x6 mm flat iron pieces one side with flanged and other side with column pipe complete all as specified and directed.

Supply & Making column pipe with Mild steel cold ERW column pipe 80 mm bore, 10 feet long, 7.20 mm wall thick and threading upto 80 mm from end including supply & fix / welded 10 mm thick mild steel flanged both ends duly drilled for fixing 04 Nos nut bolts & washers and fixing nut bolt of size 75 long & 12mm dia with 02 nos washer and suitable size of rubber gasket, including welding of three Nos 150 mm long 40x6 mm flat iron pieces one side with flanged and other side with column pipe complete all as specified and directed.

Supply & installed Star Delta Starter( fully automatic star delta) including with Power Contactor's, Relay, (for over load protection, high voltage protection,Low voltage protection, Phase reverseable protection, single phase preventer & Phase Changer protaction) & timer complete in Factory built Sheet Metal enclosure suitable for 25/30 HP Submersible pump complete all as specified and directed. Make L&T/ Schneider/Havells or equivalent make approved by GE.

Supply & Fix / Lowering PVC insulated and PVC sheathed flexible, flat, nominal size 16 Sqmm 1100 volts grade, ISI Marked three core, stranded copper conductor cable complete all as specified and directed. Make-FINOLEX / CCI / PLAZA / Gloster / KEI / Polycab

S&F safty rope 4 mm dia GI wire with pvc cover for hanging of pump assembly complete all as specified and directed.

VIJAY ENTERPRISES

M/S Konark Electric Sales Corporation

M/S ROORKEE ENGINEERING

AMAR NATH SHARMA

NITHYA INFRATECH

KISHORE ENTERPRISES