C/O Veternary Dispensary building Kasladhi at Dhanali

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of soil such as pick work, Jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling work and wedging out rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in layer when required into plinth, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead ,dressing of sides and bottom and backfilling in trenches with excavated suitable material within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Excavation in drains and channels etc. in earth work in all kinds of soil such as pick jumper work, blasting work and hard blasting work saturated soil including chiselling or any other mixed variety of soil dewatering and removal of slush and other incidentials lift upto any height stacking the excavated soil upto any lead from the ede of excavation and then retuming the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of al surplus excavated earthwithin all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Excavation in earth work and disposal of all excavated earth upto any lead and lift disposed earth to be leveled and neatly dressed in pick jumper work within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm (Three point One five millimeter) thick welded with angle iron in frame 30x30x5mm (Thirty x Thirty x five millimeter) so as to give a fair finish including centering, shuttering, strutting and proping including with wooden betttens and ballies etc. for all height of propping and centering below supporting floor to ceiling and removal of same for in situ reinforced concrete and plain concrete work within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i) Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. upto any thickness.

ii)Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights up to any floor level.

iii)Edges of slabs and breaks in floors and walls up to any width.

iv)Vertical surfaces such as walls(any thickness) partitions and the like including attached pillasters buttress, plinth and strinig courses and the like.

Providing and laying cement concrete 1:6:12 (One cement: six sand: twelve graded/ crushed stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and laying concrete for plain/ reinforced concrete 1:6:12 (One cement :Six sand : Twelve graded stone aggregate 40mm (Forty millimetre nominal size ) in open foundations complete as per drawing and technical specification clause 802,803,1202 and 1203 within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (One cement:Four sand:Eight graded stone aggregate 40mm(Forty millimetre ) nominal size) and curing complete excluding cost of form work in Foundation and plinth within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Stone masonry work in cement mortar for sub structure complete as per drawing and technical specifications clause 702,704,1202 and 1204 Random rubble masonry in cement mortar 1:6 (One cement : Six sand ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 machenically mixed and vibrated(One cement : One point five sand : Three graded stone aggregate 20(Twenty millimetre ) nominal size and curinig complete excluding cost of form work and reinforcement for reinforced concrete work in within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.i)Wall (any thickness but not less than any thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor all level

ii)Lintels, beams girders bressumers and cantilevers upto floor all level.

Providing and laying uptoall floor level cement concrete 1:2:4(One cement :Two sand : four graded stone aggregate 20mm(twenty millimetre) nominal size) and curing complete including form work in string courses, copings, bed plates, anchor blocks, plain windows sills and the like within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and laying cement concrete work 1:2:4 (One Cement:Two Sand:Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies ,beams, girders, bressumers and contilever upto floorall level within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (One cement : Three sand) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing mild steel/ tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto floor any level within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Brick work using common burnt clay building bricks in super structure above plinth level upto floor any level in cement mortar 1:6 (One cement : Six sand ) second class bricks within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Brick work using common burnt clay building bricks in super structureabove plinth level up to floor any level in cement mortar 1:5(One cement : Five sand ) 2nd class bricks within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Random rubble masonry /polygonal rubble masonry ( uncoursed / brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(one cement: six sand: twelve graded stone aggregate 20mm (Twenty millimetre ) nominal size )at plinth level in cement mortar 1:6(one cement: six sand ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Boulder filling tightly hand packed under floor within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Back filling behind abutment, wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 Granular material.within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Construction of dry rubble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and technical specification clause 704.6 & 1302.5 within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing 25mm (Twenty five millimeter ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position 2nd class deodar wood within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 40mm (Forty millimeter) thick 2nd class deodar wood within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (Zero point fifty six millimetre ) for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 30mm (Thirty millimetre ) thick 2nd class deodar wood within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen millimetre x six millimetre) section including mitring at junctions with wood screws and nails complete. 1st class Indian teak wood within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws Plain grill within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing 40x3 mm (Forty x three millimetre ) flat iron hold fast 40cm.(Forty centimetre ) Long including fixing to frame with 10mm (Ten millimetre ) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm.(Thirty x ten x fifteen centimetre ) 1:3:6 ( One cement : Three sand:Six graded stone aggregate 20mm (Twenty millimeter ) nominal size) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing 100mm (One hundred millimetre ) bright finished brass floor door stopper with rubber cushions crews etc. to suit shutter thickness complete within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 300x 16mm (Three hundred into sixteen millimetre ) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge. a)200x10mm (Two hundred into ten millimetre)

b)150x10mm(One hundred fifty into ten millimetre )

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete 125mm (One hundred twenty five millimetre) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing bright finished hard drawn hooks and eyes within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing 50mm (Fifty millimetre ) bright finished brass cup board or ward robe knob within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Cement concrete flooring 1:2:4 (One cement : Two sand: Four graded stone aggregate 20 mm (Twenty millimetre ) nominal size) laid in one layer finished with a floating coat of neat cement 50mm(Fifty millimetre thick within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Kota stone slab flooring 20 mm (Twenty millimetre ) (average) thick base of cement mortar 1:4 (One cement :Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete 25mm (Twenty five millimetre ) thick within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

40 mm(Forty millimetre ) thick marble chips flooring rubbed and polished to granolithic finish under layer 34 mm(Thirty four millimetre ) thick cement concrete 1:2:4 (One cement Two sand Four graded stone aggregate 10 mm(Ten millimetre) and down gauge and top layer 6 mm (Six millimetre) thick marble chips of required sizes laid in cement marble powder mix 3:1 ( Three cement : one marble powder by weight) in proportion of 4:7 (Four cement marble powder mix : seven marble chips by volume) medium shade pigment with approximately 50% white cement and 50% & ordinary cement (in top layer only) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Kota stone slab 25 mm(Twenty five millimetre ) thick in risers of steps , skirting, dado and pillars laid on 12 mm (Twelve millimetre ) (average) thick cement mortar 1:3 (One cement :Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Marble chips skirting or dado upto 30 cm.(Thirty centimetre ) height (rubbed and polished to granolithic finish) laid in cement marble powder mix 3:1 (Three cement :One marble powder by weight) in proportion of 4:7 (Four cement marble powder mix: Seven marble chips by volume) in top layer:- Medium shade pigment with approximate 50 % white cement and 50 % ordinary cement (in top layer only) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and laying spartic ceramic tiles 5.5mm (Five point five millimetre) thick in flooring (300 x 300 mm(Three hundred x three hundred millimetre size) treads of steps laid on a bed of 12mm (Twelve millimetre ) thick cement mortar 1:3(One cement: Three sand) finished with flush pointing in white cement within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and laying granite stone in flooring 20mm (Twenty millimeter ) (average)thickness base of cement mortar 1:3(One cement: Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm (Twenty millimeter ) thick within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Coloured glazed tiles 6mm(Six millimetre) thick in skirting, risers of steps and dado 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 5mm(five millimetre) thick within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing 19mm( Nineteen millimetre) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing 1.00mm (One point zero millimetre ) thick coloured or plain lamination sheet (sun mica) on boards/ply wood sheets with approved adhesive & nails etc complete within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing 0.60mm(Zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5(Five) microns primer coating to back coat of polyester of 5(Five) microns over 5(Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm( Six millimetre dia metre with prepainted limpet and rubber washers complete with all accessories within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 Cm (Zero point sixty centimetre ) overall with 0.60mm (Zero point sixty millimetre ) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20(Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required per direction of Engineer-in-charge within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5(Four point five kilogram/square metre including filling the joints with approved adhesive complete 100mm dia pipes within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in-charge. a) PVC Plain bend 150mm(One hundred fifty millimetre) dia

b) PVC corner type bend 150mm (One hundred fifty millimetre) dia

c) PVC shoe 150mm (One hundred fifty millimetre) dia

Providing and fixing M.S. BP Sheet 1.66mm(One point sixty six) to 2mm (Two millimetre ) thick in eaves board / facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge. a) In gratings framed guard bars ,ladders ,railing, brackets & similar works

b) In trusses and trussed purlins in buildings.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint bruising to give an even shade including cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil, grease ,dirt and other foreign matter) sand papering and knotting Ready mixed paint brushing wood primer pink within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Painting two coats (excluding priming coat)on new wood and wood based surfaces, with ready mixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping: Ready mixed paint other then white within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

15mm(Fifteen millimetre) cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor any level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(Eighty millimetre in girth and finished even and smooth Cement Mortar 1:6 (One cement: Six sand) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

20mm(Twenty millimetre ) cement plaster in single coat on rough side of brick /stone masonry for interior plastering upto floor all level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(Eighty millimetre ) in girth and finished even and smooth Cement Mortar 1:3 (One cement : Three sand ) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

15mm(Fifteen millimetre ) cement plaster in single coat on the rough side of brick / concrete /stone walls for interior plastering upto floor all level including arrises ,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(Eighty millimetre ) in girth and finished even and smooth cement mortar 1:6 (One cement : Six sand ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equalized on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Providing plinth protection 50mm(Fifty millimetre ) thick in cement concrete 1:3:6 (One Cement : Three Sand : Six Graded stone aggregated 20mm(Twenty millimetre ) nominal size) within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Providing under layer for plinth protection of 75mm (Seventy five thick (unconsolidated) bed dry brick/stone aggregated 40mm(forty millimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm (Fifteen into twenty two centimetre ) in cement mortar 1:6 (One Cement : Six Sand) and inside plastering with cement plaster 1:3 (One Cement: Three Sand) including earth work and laying 10 cm (Ten centimetre) cement concrete in 1:5:10 (One Cement : Five Sand : Ten graded stone aggregate) of 40 mm (Forty millimetre ) nominal size) and 7.5 cm(Seven point five centimetre ) cement concrete 1:2:4 (One Cement : Two Sand : Four Graded stone aggregate of 20 mm (Twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lift including carriage of material in all respect and as per the direction of Engineer-in- charge.

Supplying cast iron cover without frame for manholes from frame of internal diamension 455x610mm (Four hundred fifty five x six hundred ten millimetre) rectangular CI cover( light duty single seal pattern-I) the weight of cover to be not less than 23 kg.(Twenty three kilogram. ) within all leads and lift including carriage of material in all respect and as per directiono of Engineer-in- charge.

Providinig and placing in horizontal layers filtering media duly grade screened washed and cleaned as specified by the Engineer-in-charge within all leads and lift including carriage of material in all respect and as per directiono of Engineer-in- charge. i)Top layer fine sand(Effected size 0.20mm(Zero point twenty millimetre) to 0.40mm (Zero point forty millimetre ) and uniformity-co-efficient 2.00 to 3.00 (Two point to zero to three point zero)

ii) 2nd layer course and 3mm(Three millimetre) to 6mm ( six millimetre )

iii) Third layer Bajri 66m(Six millimetre ) to 20mm(Twenty millimetre )

WS&SI Providing and fixing to wall , ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floor within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i) 20mm (Twenty millimetre )

Providing and laying in trenches, galvanized mild steel tubes (Medium grade), tube fittings(earth work in trenches to be measured and paid for separately ) 15mm (Fifteen millimetre ) nominal bore within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type WC pan) size 580mm (Five hundred eighty millimetre ) (earth work , bed concrete, foot rest and trap to be measured and paid for separately ) Orissa Pattern.within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing 100mm(One hundred millimeter ) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement : One sand ) Sand cast iron within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings with flat back 630mmx 450mm (Six hundred thirty millimeter x four hundred fifty millimeter ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing 32mm( Thirty two milimetre) dia C.P. brass waste for wash basin and sink within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing 600mmx 450mm(Six hundred millimetre x four hundred fifty millimetre) beveled edged mirror of superior glass mounted on 6mm (Six millimetre ) thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws 600mm x 20mm (Six hundred millimetre x twenty millimetre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing 600mm x120mm (Six hundred millimetre x one hundred twenty millimetre )glass shelf with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass bib tap with capstan head 15mm(Fifteen millimetre) dia within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass pillar tap with capstan head 15mm (Fifteen millimetre) dia within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing C.P. stop cocks 15mm (Fifteen millimetre ) dia within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing P.V.C. connection with brass unions 300/450mm (Three hundred/four hundred fifty millimetre ) length and 15mm(Fifteen millimeter ) nominal bore within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre nominal bore within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing PVC water storage tank of ISI: 12701 marked GI inlet and outlet connection, 15mm(Fifteen millimeter ) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level 1000(One thousand ) litres net capacity tank within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110mm x 75mm (One hundred ten millimetre x seventy five millimetre ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i)110mm(One hundred ten millimetre )

ii) 75mm (Seventy five millimetre )

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete dia 110mm(One hundred ten millimetre ) dia within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i)110mm(One hundred millimetre ).

ii) 90mm (Ninety millimetre)

Providing and fixing stainless steel kitchen sink of approved standard ISI lmarked with drain board and CP waste with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting 470x420mm (Four hundred seventy x four hundred twenty millimetre ) with bowl depth 178mm(One hundred seventy eight millimetre ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing PTMT coloured/ white automatic flushing cistern with a pair of PVC/ CI or MS bracket complete with fittings including PVC symphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same(over flow pipe to be measured and paid for separately 10(Ten) litres net capacity within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing PTMT waste coupling of approved quality and color 32mm(Thirty two millimetre ) nominal bore. within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Providing and fixing 100mm(One hundred millimetre ) dia chromium plated grating of superior quality for floor, gully or Nahani trap within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix in ( 1cement: 2 sand: 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:4:8 ( 1 cement: 4 sand: 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with C.M. 1:3 ( 1cement: 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i) Inside size 800x800x500mm (Eight hundred x eight hundred x five hundred millimetre ) deep including C.I. cover with frame (Light duty single seal pattern 1) 455mmx610mm (Four hundred fifty five x six hundred ten millimetre ) internal dimensions total wt. Of cover and frame to be not less than 38 Kg (Thirty eight kilogram ) (weight of cover 23 Kg.(Twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram ) . a) With 200mm (Two hundred millimetre ) thick walls of brick masonry using common burnt clay building bricks in CM 1:3 ( One cement: Three sand)

RAJESH KUMAR

VINDER SINGH CONTRACTOR