Installation of Hand Pump alongwith 1.50 HP submersible motor at ward No. 2 near CSC Centre or house of Shri Desh Raj Vidya Devi Parveen Sharma and other Villagers at Village Langhu GP Gadiara in Tehsil Baijnath District Kangra HP under Deposit Work

Transportation of suitable truck/tractor mounted where only road available DTH & ODEX / Percussion Calys / RC Drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including leveling etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Development of site inlcuding levelling at site through all kinds of roads, approaches field etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Drilling tube well of 152 milimetre dia as per IS 2800-1979 using percussion / Calyx / RC / ODEX method required for drilling in collapsible strata conglomerate, boulders, pebbles, sand gravels, silt, clay etc. including cost of attachements, extra casings, consumables stores, bits, water, POL, gravel pack in a space etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Supply and lowering of IS makred electric resistance welded mild steel pipe 125 milimetre dia nominal size housing 5.0 mm thickness confirming to IS 4270-2001 with up to date amendments if any, 3 to 6 metres in length, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps including cost of all cutting, threading and welding of pipes etc complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Collection and preservation of soil samples in polythene bags complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Providing and fixing casing shoe for 125 milimetre dia MSERW pipe as per requirement of ODEX attachement complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Development of bore well and yield testing with Air compressor through V-notch and disinfection etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Providing, Installation,Testing and Commissioning of 1.50 HP Submersible motor set of KSB/ Kirloskar make conforming to IS:8034-1976 (latest with upto date amendment) Suitable for operation on under mentioned characterstics complete as per manufacture standard including required accessories coupled directly to submersible motor suitable for operation 230 Volts three phase 50 H.Z. A.C supply minimum class 'B' insulation. The power of the motor should be 10% in excess of maximum powers required by the pump in the complete range of (-) 25% and +10% of duty point head. The motor should be conforming to BIS 325-1970 and latest with up to date amendments and also complete earthing with copper strips as per HPSEBL rules and IS code 3043-1966 of latest Complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 2.5 mm2 of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing and fixing of starter ( direct on line) of standard make such as L&T/ MEI/ Havels/ AVON/ Crompton/Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 300 ampere of standard make as per the Engineer in Charge.

Supply and fixing mild steel angle from steel 16 SWG fabricated floor mounting type switch board comprising and capable of mounting the following accessories and with all internal electrical connection dully painted. The drawing of the pannel board will be subject to approval of Engineer in Charge.

Providing and fixing electric material for energisation of hand pump wooden board 3"x3" MCBICTP including switches, wire 3/29 , 1/ 18, 7/22 fuse 32 Amp. DP switch with sheet insulation switch board with sheet including sockets and switch angle holder bulb ( lamp 100 Watt) nut & bolts and all other petty items required for electrical connection as per requirement complete in all respect as per the satisfaction of Engineer in Charge.

Providing and fixing in position threaded mild steel plate with nipple 32/40 milimetre dia welded, galvanised iron reducer 32/40 milimetre dia M. Seal & PVC tapper etc. Complete in all respect as per the satisfaction of Engineer in Charge.

Providing , fixing and fitting 3 - layer PP-R (Polypropylene random copolymer) pipes UV stabilized and antimicrobial fusion welded, having themal stability for hot and cold water suply including all PP-R plain and brass threaded polyproylene random fittings complete to ISI 15801-2010 and testing of joint including high steel carbon rope size 5 milimetre square for holding of submersible pump set within all leads and lifts as per the direction of Engineer in Charge.

a) 40 milimetre dia ( PN-16)

Providing , fixing and fitting 3 - layer PP-R (Polypropylene random copolymer) brass light weight (Peet valve) fitting within all leads and lifts as per the direction of Engineer in Charge.

a) 40 milimetre dia