Providing Installation Testing and Commissioning of 02 Two Nos floor mounting vertical split type AC machine in the New Conference Hall to be created in the existing hall at first floor of Tripura Legislative Assembly Building Agartala

Amount

Supply, Installation, Testing and Commissioning of ISO certified company made Air Cooled Floor standing Tower type split Air conditioners complete with Indoor unit(IDU), Outdoor unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) up to 3 Mtr (IDU to ODU), copper power cable up to 3.5 Mtr (IDU to ODU), R-32/R-410/R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut-off and 50 hz,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary with min 5 year OEM warranty both compressor and PCB. NABL accredited as per IS/ISO/IEC 17025 standards / CPRI/ERDA lab testing reports as per IS 1391 with OEM certificate must submitted to Engineer-in-charge. All as per pre approved by Engineer-in-charge. Cooling capacities are based on following condition - Indoor temp 27°CDB, 19° CWB; Outdoor temp 35° CDB, 24° CWB. Heating capacities are based on following condition Indoor temp 20°CDB, 7° CWB; Outdoor temp 7° CDB, 6° CWB. Piping connection should be 9.5 mm & 1 5.9 mm as per ISO manufacturing standards. Complete as per CPWD specification/drawings and as directed by Engineer-in-charge.

3.8 TR (rated cooling capacity should not be less than 11491 kcal/hr. or 45600 Bthu/hr. or 13364 watt).

Standard installation testing and commissioning of 3.0/4.0 TR tower/ floor machine vertical split type Ac machine including hole cutting finishing etc as per direction of the Engineer in charge

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge.

Supply, installation of additional length of copper pipe beyond 10 ft length of 5/8’’, 3/8’’, 1/2’’and1/for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge.

Eastern Commerce (BID ID -174342)