Construction of Mourner Shade in connection with the construction of Boundary wall surrounding Chhartandu Patowari para Graveyard

Earth work in excavation of foundation trenches or Drain in all sorts of soils ……….including removing spreading or stacking the spoils with in a lead etc. A) ( Depth not exceeding 1.50 m)

Earhtwork in Filling in foundation or plinth with good earth in layers not exceeding 15 cm including watering and ramming etc layer by layercomplete . A) with earth obtained from excavation of foundation.

Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand .

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes

Ordinary cement concrete(mis 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any , in ground floor as per relevant IS codes (a) M20 Grade ii) River Bazree in G. F.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel. I. SAIL/ TATA/RINL

Hire and labour charge for providing shuttering work with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing ……….…………etc complete without stagging in foundation.

a) 25mm to 30mm thick wooden shuttering as per decision and derection of E.I.C.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall , floor, celling ) with sand and cement Mortar including off or chamfering corner a) with 15 mm th Cement plaster(4:1)

Plaster (to wall , floor, celling ) with sand and cement Mortar including off or chamfering corner a) with 20 mm th Cement plaster(4:1)

c) with 10 mm th. Cement plaster (4:1)

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface)

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour

Neat cement punning about 1.50 mm thick in wall,dado,window sill etc.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two coats.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in- charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)

Aluminium sheet Ridging fitte with self tapping screws………………………………………………. A)300mm lapping each way (a) with 0.71 mm sheet

GST @ 18% of gross amount

Labour Welfare Cess @ 1% of gross amount