Electrical and Mechanical Components for LIS Phase 1st ( Stage 2nd) Khudpora

Providing of single core unarmored, XLPE Aluminum Cable of 630sq-mm size . The cable shall be provided and fitted with suitable size aluminum thimbles /lugs ,to its terminal duly crimpled with hydraulic crimpling tool the job includes providing and fitting of other fitting material.

Supply, installation testing and commissioning of 400 mm DI Dual Plate Double flanged Check Valve of pressure rating PN 2.5 (VAG/ IVC/ SigmaFlow/ Tallis/ Bikaner or equivalent conforming to IS-5312 with latest amendments or equivalent international standards to following a)Body: Ductile iron GGG40 (EN-JS-1030) b)Plate/Door : Ductile iron GGG40 (EN-JS-1030)/Cast Steel c)Shaft and Spring: Stainless Steel Surface Protection: epoxy powder coating. The job includes fabrication of By-pass arrangement as under:- Providing and fitting of 50 mm dia GI/ steelpipe of required length along with 02 No. of elbows of reputed make Providing and fitting of 01 no. steel/brass ball valve 50 mm of reputed make

Fabrication, providing, fitting and installation at site of 400mm diameter Mild steel expansion joints to be fitted to the rising main pipe line. The job comprises of following specifications, fabrication details and involvement of material etc. The expansion joint shall have to be fabricated out of Mild steel plate of 12mm thickness dully rolled in perfect circular formation and shall consists of:- I. Female pipe piece. II. Male pipe piece. III. Gland. IV. Flanges. I. Female pipe piece:- Female pipe piece shall be fabricated out of Mild steel plate having thickness 12mm and diameter as 400mm, 425mm and 450mm. the length of each pipe piece shall be 150mm duly welded with each other. The 425mm dia central piece shall be duly turned and finished to proper size to accommodate the male piece with its easy movement to and fro during expansion and contraction. The female pipe piece shall be welded with M.S flange on both sides, i,e 400mm and 450mm. II. Male Pipe Piece:- The male pipe piece shall be fabricated out of 12mm thick Mild steel plate duly rolled in perfect circular formation having length 550mm The male pipe piece shall be turned to accurate size on lathe machine to give easy movement during operation. III. .Gland:- The gland shall be fabricated out of 12mm thick Mild steel plate having length 150mm duly turned to move over the male piece to make the packing material tight to avoid leakage. The gland shall be flanged on one side for lifting of the gland during operation. The job includes painting with one coat of steel primer the job also includes providing and fitting of nuts and bolts etc IV: Mild steel flanges for Male/female/Gland and Matting Flanges having the following specifications:- a.Inner dia of flange ...400mm b.Number of holes on flange ....16 Nos. c.Thickness of flange.....32 mm.

Providing and fitting of Cleats to exisiting joints. The cleats shall be made out of 45x45x5mm angled iron of each 6 inch in length. Three number of cleats shall be fitted per joint for strengthening of joints.