Loading…
Loading…
Tender Value
₹32.0 L
EMD Value
₹32,000
Closing Date
20 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Panchayat R. & B. Division, Palanpur
Construction of Taluka Panchayat TDO Quarter (Cat D type) at Palanpur Under Panchayat R and B Sub Dn. Palanpur Under CDP-3/ 2024-25/ Package No.08 Ta. Palanpur Dist. Banaskantha
301386
01 (2026-27)
Open
Civil - All
Banaskantha
8 documents required · 7 mandatory · 1 optional
₹1,500
Executive Engineer, Panchayat {R. &B.} Division Palanpur
₹32,000
11 May 2026
11 May 2026
11 May 2026
20 May 2026
11 May 2026
Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials
1 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 102.00 Cu.m 122.94
Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials
2 and disposing of the excavated stuff as directed with in all lead & Lift (B) Dense or Hard soil. Or 35.00 Cu.m 157.16
Excavation for foundation 1.50mt. to 3.0 mt. depth including sorting out and stacking of useful
3 materials and disposing of the excavated stuff as directed with in all Lead & Lift (C) Hard Murrum 62.00 Cu.m 287.21
Filling foundation and plinth with sand under floors including watering, ramming and consolidating
4 dressing etc, comp. 8.00 Cu.m 444.75
Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not
5 exceeding 20cm. In depth consolidation each deposited layer by ramming and watering. 59.20 Cu.m 136.92
6 watering, ramming and consolidating etc. comp. 72.00 Cu.m 282.07
Applying general insecticide pest control treatment to floors, cupboards etc including labour materials
etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075% concentration by mass) is
7 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of 98.00 Sqm 80.84
surface is recommended as per I.S
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates
8 20 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 8.00 Cu.m 3955.16
Providing and laying cement concret 1:1.5:3 (1 Cement : 1.5 coase sand : 3 graded stone aggregrate
20mm nominal size) and curing complete exculding cost of form work and reinforcement for
reinforced cement concrete work in (a) Foundation footing base of column and mass concrete
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in
column Upto plinth level.
Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse sand : 6 graded B.T stone
11 aggregate 20mm nominal size) Curing comp. including cost of form work in foundation and plinth. 14.10 Cu.m 3247.28
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
12 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 8.00 Cu.m 7420.21
column for All Floor
Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work (c)
PLINTH BEAM
Providing and laying nominal cement concrete M-150 in R.C.C. 1:2 :4 (1 cement : 2 coarse sand :
graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete
14 including the cost of form work but excluding the cost of reinforcement for R.C.C. work PLINTH 7.40 Cu.m 4237.96
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
15 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 8.20 Cu.m 6672.29
BEAMS For All Floor.
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
16 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 2.20 Cu.m 7681.02
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
17 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 1.60 Cu.m 6830.26
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
18 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 21.00 Cu.m 6494.62
Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse
sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing
19 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 1.10 Cu.m 7826.06
staircases.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing T.M.T. bar FE500/500D reinforcement confirmed to for R.C.C. work including bending,
20 binding, and placing. In position comp. Up to floor two level. For All Floor 9920.00 Kg 77.37
Brick work using common burnt clay building bricks having crushing strength not less than
21 Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. 28.00 Cu.m 4214.33
Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./
22 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 33.00 Cu.m 4506.53
two level ( for G.F ) Conventional
Half brick masonary in common burnt clay building bricks having crushing strength not less than
35kg./sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia mild steel round
23 bars every three coarse embedded in cement mortar in superstructure for Ground floor 33.00 Sqm 750.76
(Conventional)
Providing and fixing door Single shutter having factory fabricated std. Extruded aluminium colour
anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion
of door frame shall be filled with wood to be insert for durable grip of door hinges, with factory
made 38 mm.thick flush door both side pre laminated with 6 Lever Mortice lock , SS Aldrop 30cm
long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern approved
by this office including necessary anodized alluminum fixtures and fastenings.
Providing & fixing FRP Frame size100 x 50mm and 28mm think FRP depress pannel shutter having
extra reinforcement on sides ad edges and in gel coat finish. The cores of the shutter is to be filled up
with intected fire extinguishing grade polyurethane wooden pieces for stiffening and also for taking
25 hinges and fixtures. The FRP shutter is to be water proof, weather proof, termite proof and resistance 5.00 Sqm 2377.76
to mild acid / Alkali including S.S hinges with necessary screws and alluminium fixtures and
fastenings & Fastener Sleeve.
Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System C (20mm)
series sction memebers THREE track window section bottom track 21651, frame top & side
shutter frame top rail 20530, bottom rail 20529, side rail 20544, lock rail 20531 with 5mm thick
26 transparent plain float glass, with transparent silicon sealant with allu. anosized coated fittings and 10.00 Sqm 2749.22
fixture etc complete.
Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System E (30mm)
series sction memebers TWO track window section bottom track 20879, frame top & side
27 shutter frame top & Lock rail 21675, bottom rail 20772, inter lock rail 20550 with 5mm thick 1.00 Sqm 2296.74
transparent plain float glass, with transparent silicon sealant with allu. anosized coated fittings and
fixture etc complete.
Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @
Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted
28 glass as details etc complete for Ventilation {Colour as directed by Engineer in charge except black & 1.00 Sqm 1175.56
Alluminum section and glass
Providing and fixing M.S. box pipe 75mm x 50mm grill at 10cm interval vertical at required spacing
as per design including hold fasting with coach bolts including one coat of primer and two coats of
29 mattfinished oil painting etc complete. 8.00 Sqm 3167.36
Providing and fixing Safty grills of required pattern for windows Rectangular CRC pipes of size 50 x
30 x 2mm at required spacing as per design including fixing rat mesh and hold fasting with coach
30 bolts including one coat of primer and two coats of mattfinished oil painting etc complete. 300.00 Kgs 111.40
Providing and laying 18mm thick GVT slab ( Single Piece for riser 1250 x 150 and tread 1250 x
mm & 600 x 600 landing ) for stair steps and risers as per design including full moulded round front
31 steps & necessary groove on treads of steps laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 15.00 Sqm 2667.41
coarse sand ) jointed with gray cement slurry including rubbing and polsihing etc. complete.
Providing and laying machine polished machine cut Kota stone slab ( 60 x 45cm Size) flooring over
20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime
32 putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match 5.00 Sqm 1018.88
the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick
Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars
laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury
33 mixed with pigment to match the shade of slab including rubbing and polishing etc. complete 6.00 Sqm 1130.79
Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as
detailed approve by architect ( 10% Dark colour tiles Pattern ) in flooring treads of steps and landing
34 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush 65.00 Sqm 1120.36
pointing in white cement.
Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as
detailed approve by architect ( 10% Dark colour tiles Pattern ) in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and laying 30cm x 30cm in size Ceramic tiles 6mm thick in flooring treads of steps and
36 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 6.00 Sqm 987.14
flush pointing in white cement
Providing and laying 30 x 45Cm size glazed tiles 6mm thick in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry
Provding and filling the joint with epoxy grout 3 mm width and 8 to 10 mm deep, including cost of
necessary materials, PVC spacers, filling grout and cleaning etc complete as directed by engineer in
38 charge. { Colour and Pattern as directed by engineer in charge.} 38.00 Sqm 40.40
Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm
C.C. 1:2:4 ( 1 Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for maintaining
slope for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one
or more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )
containg one Kg. of water profing materials per bag of O P C at plain or / and slops and to be Sqm
tempered to bring mortar ceramic up to surface with using white cement and colour pigment
including rounding of junctions and extending them up to 15 cm along the wall and curing with
bends any pattens or design as per drawing and cleaning by using oxalic acid etc complete.
Providing and laying Mirror polished Machine polished Grenite stone slab 18mm thick for doors &
windows sill & Jams clading as per design including full moulded round front steps & 1cm nosing &
40 necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand 25.00 Sqm 2528.03
) jointed with gray cement sluury including rubbing and polsihing etc. complete.for Doors / windows
sill & jams clading.
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :
41 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse 285.00 Sqm 283.95
sand) finished with trovel including scaffolding curing etc. complete. For Ground Floor
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering
upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
42 including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 90.00 Sqm 215.32
Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the
43 Brick.masonary and reinforcement cement concrete member including fixing materials scaffolding 35.00 Sqm 92.92
labour etc. complete
Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing the surface free from mortar dropping
44 and other foreign matter and sand papered smooth. 375.00 Sqm 40.59
Wall painting with Applying two coats of putty & two coats of primer of approved brand (three
coats) plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give
45 an even shade including throughly brushing the surface free from mortar droppings and other foreign 285.00 Sqm 125.73
matter and sand papered smooth.
Wall painting with Applying two coats of putty & two coats of primer of approved brand & (three
coats) with plastic emulsion paint of approved brand and manufacture on undecorated ceiling surface
46 to give an even shade including throughly brushing the surface free from mortar droppings and other 90.00 Sqm 131.26
foreign matter and sand papered smooth.
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting
of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.
1:1 (1-cement : 1-sand) with 1cm x 1cm groovs as per pattern sample approved by the engineer Sqm
incharge etc. complete.
Providing and fixing 90 cm high Stainless steel railing made from anticorrocive S S pipe of 50 mm
dia (16Gauge) as hand rail with S S 38 mm dia (16Gauge) as a vertical support fixed in RCC slab at
48 1.2m c/c including three horizontal S S pipes of 25 mm dia (16Gauge) at eqal distance fixed by 8.00 Rmt 3144.13
18.75 mm dia (16Gauge) S S pipe including accessories as per detailed drawing as directed etc.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the
49 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 25.00 Rmt 72.65
etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of
all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the
50 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 35.00 Rmt 91.84
etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of
all materials. [B] 25mm dia.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the
help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings Rmt
etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of
all materials.[D] 40 mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having
National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube
52 fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. 13.00 Rmt 170.36
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having
National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube
53 fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. 19.00 Rmt 253.82
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having
National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube
54 fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. 10.00 Rmt 447.72
Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required
fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (B)
25mm dia.,
Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required
fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C)
40mm dia.,
Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x
57 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 10.00 Rmt 933.05
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including cost of all materials.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of
the following outside Dia. Low densidy, complete with special flange compression type fittings, wall
58 clipsetc. including making good the wall ceiling and floor.(A) 110mm dia. 23.00 Rmt 338.95
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x
59 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 46.00 Rmt 1053.73
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including cost of all materials.
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x
60 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 10.00 Rmt 834.38
directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including cost of all materials.
Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all type necessary
61 fittings and accessory etc. completed as per directed engineer in charge. 61.00 Nos 75.75
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the
following nominal diameter of self cleansing design with C.I scread down or hinged grating including
62 the cost of cutting and making good the walls. 4.00 Nos 733.26
Providing and fixing screw down quarter turn heavy duty bib taps of following size (A) Brass
chromium plated screw down bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent brand ) Nos
Providing and fixing C.P. brass shower rose heavy duty with 15mm or 20mm inlet.(A) 200mm dia.
64 Each 1.00 Nos 282.16
Providing and fixing Toilet paper Roll holder with Flap of Jaguar or equivalent brand as directed by
65 Engineer in charge including fixing as and where directed etc. complete.(A) C.P. Brass 1.00 Nos 375.82
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with
screw, shanks and back nuts (A) 15 mm dia {Jaquar< Plumber, Mark Long pipe or equivalent brand}
Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or
M.S brackets painted white including cutting cutting holes and making good the same including C.P.
67 brass waste and waste pipes and bottal trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 1.00 Nos 1890.72
400mm size.In colour.
Provision and fixing water closet squatting orissa type W.C. pan size 580mm integral footrest and
100 mm P or S trap and in cluding 25 mm dia CP brass flush valve and GI inlet connection etc.
comp. (A) Vitreous china long pattern white or color
Providing erecting and fixing double coated 4-layer tough virgin plast ISI water tank of required
69 capacity each with all necessary fittings and connection etc. complete on terrace. 1000.00 Litre 9.54
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick
70 A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. 1.00 No 859.41
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs
71 with C.P. brass scews.(B) 600mm x 20mm size. 2.00 No 616.42
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.
cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B)
150mm x 100mm size P of R type
Providing and fixing CP brass screw down stop cock of approved quality 15mm size with adjustable
73 wall flange..or as per instrction of engineer incharge. 4.00 No 205.83
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with
briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
74 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 2.00 No 2932.93
with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete
etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with
briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick
with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete
etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or
two inlets.
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with
briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse
76 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 2.00 No 7180.44
with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete
etc. complete.(iii) Inside dimensions 600mm x 850mm and 450mm deep for pipe lines with three
or more inlets
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an
required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of
77 loose powdered materials.etc complete 219.00 Sqm 73.83
Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 25 mm thick
Kota stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges with waterproof
rigid adhesives including macking necessary grooves in walls with Vertical Kotastone 30 mm x
78 No sandwitch thick every 60 cm centre to cenre including all labour material of approved quality 2.40 Sqm 9080.91
incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry
including rubbing and polishing etc. complete
Providing and fixing stainless steel kitchen sink glossy ASIS 304 grade and 1 mm thick with overall
size 510mm x 432mm x 330mm deep having bowl size 410mm x365mm x 165mm of Nirali or
equivalent brand with all fittings CI or MS brackets painted white or fixing on stone base including
cutting holes and making good the same brass valve and fisher union fitting including all necessary
Providing thoruting or plaster drip and moulding to R.C.C. chhajja.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing 12mm wide groove throating / notch in plaster including finishing the same etc. complete
81 for all height. 78.00 Rmt 15.15
Providing and fixing 18MM TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH
BOTH SIDE LAMINATE & PVC BEADING ON PERIPHERY and Providing and Fixing Stainless
Steel (Grade -316) accessories, sheet cutlery basket (2 Nos), Thali Basket(2 Nos), Plain Basket(2
nos), Cup Saucer Basket (2 Nos) of size 520 x 485 x 100 mm fixing on telescopic channel (GODREJ
OR EQUIVALENT) having hardware like handles, dead lock, magnet etc with fixing all expose
surface are decoartive laminate sheet and other inner surfaces are 1.0 mm thick lamiate including all
necessary fixture and fastening ( Steel handle, hinges, stopper , chains and locking arrangement etc.
complete as directed by Engineer-in-charge.
Providing and Fixing 18 mm thick Plywood SLIDING SHUTTER for Cupboard or Below platform
shutter using 18mm thick TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH BOTH
SIDE LAMINATE & PVC BEADING ON PERIPHERY. Exposed face should be covered with
mm thick laminate of approved quality and pattern, colour, texture the rest of the inside surfaces,
shelves ete. shall be finished with 0.80 mm thick white laminates of approved make, wooden framing
83 shall be used including alround framing of 19 mm X 12 mm. teak wood member at all borders and in 11.00 Sqm 15437.85
the centre where ever, all the sides of the shutter should be covered with teakwood battens and
provided with necessary framing, best quality SS channels for sliding, SS finished hinges, hadles,
megnet, deadlock etc. as approved and directed by Engineer-In-Charge.
Providing and laying Granite Stone Slab 20 mm. thick in Cupboard Shelves resting on wall fix and
84 jointed with white cement slurry including rubbing, polishing labour charges finishing etc. complete 9.00 Sqm 1469.55
as directed.
Providing and fixing in position 300mm high , 150mm wide englsih letter made from 1.0mm thick
stainless steel sheet as directed by enginer in charge with all necessary tolls & plants etc. complete.
Providing and fixing in position 150mm high , Englsih letter made from 1.0mm thick stainless steel
sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. No
Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone
87 aggregate 40mm nominal size) and curing complete excluding cost of form work in :(a) Foundation 3.00 Cu.m 2653.42
Providing and laying controlled cement concrete M-200 and curing complete including the cost of
88 form work but excluding the cost of reinforcement for reinforced concrete work in Wall 3.00 Cu.m 5652.97
caps/Copping Ground Floor
Providing T.M.T. bar ( Thermo Mechanically treated Bars) reinforcement confirmed to IS-1786
Fe415 for R.C.C. work including bending, binding, and placing. In position comp. Up to floor two
89 level. For Ground Floor 530.00 Kg 77.29
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering
upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
90 including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 16.00 Sqm 215.32
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting
of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. Sqm
1:1 (1-cement : 1-sand) etc. complete.
Providing 15 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall
for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-
cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement
mortar in proportion recommended by the manufacturer for All Floors.
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on
undecorated wall surface to give an even shade including throughly brushing the surface free from
mortar droppings and other foreign matter and sand papered smooth.
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an
required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete
Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat
95 cement finishing, watering etc. complete. 12.00 Rmt 24.28
Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including
cost of all materials.[E] 50 mm.
Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 50mm dia.,
Providing 15mm thick cement plaster in single coat on fair side of bricks/ concrete wall for interior
plastering upto floor two level finished even and smooth in cement mortar 1:4 ( 1 cement :4 sand )
99 etc. complete. 15.00 Sqm 215.65
Providing water harvesting pit 2.40 mt dia x 2.40 mt depth with excavation in any strata filling the pit
with brick bats in 0.60 mt depth, 0.30 mt with 25mm to 40mm kapchi 0.30 mt with 10mm to 20mm
kapchi & 2.00 mm depth with coarse sand in layer including maing the lines (PVC) for water inlet Rmt
etc. as directed including 250mm dia bore work with 6" PVC" pipe upto 35mt etc, comp.
Providing and laying ordinary cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) and curing etc. complete including the cost of form work but
excluding the cost of reinforcement.(a) Footing.
Providing and laying Controlled cement concrete M200 and curing etc. complete including the cost of
form work but excluding the cost of reinforcement for R.C.C. work in SLABS 12 cm thickness. for
102 Ground Floor 1.00 Cu.m 6494.62
Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling
and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable
materials(D) By mechanical means in area of thorny jungle
Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff,
embankment as and where directed within 200meters from the end of the cutting with all required
104 lead and lift.(C) Above 400 Meters upto 500 Meters. 272.00 Cu.m 93.54
Demolition including stacking of serviceable materials and disposal of unserviceable material with all
lead and lift. (1) R.C.C Work Cu.m
Demolition of brick work and stone masonory including stacking of serviceable materilas and
disposal of unserviceable materials with all lead and liift (2) In cement Mortar Cu.m
Dismentaling of sheet roofing including ridges , hips,valley,gutter etc. stacking of seviceable
materials and disposal of unseviceable materials with all lead and lift (2) A.C Sheet roofing. Sqm
Dismentling steel work including distemering and stacking the materials with all lead and lift.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with
109 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 15.00 Pt. 485.81
necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC
pipe and accessories erected concealed in wall/ceiling complete Cat. III Make:- Honeywell, L&T,
Crabtree, Indoasian, M.K, Anchor
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked
1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured/metallic/white front plate modules erected on
110 / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with 5.00 Pt. 674.68
medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling completeCat.III
Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate
111 modules erected on / in wall / ceiling with following type accessories Cat.III Make:- Honeywell, 7.00 Pt. 257.55
L&T, Crabtree, Indoasian, M.K, Anchor
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,
single mounting base frame covered with textured / metallic/white front plate , modules erected with
112 necessary connections as per site situation directed by Engineer In charge.
(1)One No. SP 6 Amp.Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(2) One No 5 pin plugCat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(3) Two Pin/RJ-11 Telephone Socket
[B] For Two Gang Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(4) TV Co-axial Socket outlet Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(8) Computer RJ-45 socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(9) 16 Amp. SP one way switch Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor
(10) 6/16Amp. Universal socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K,
Anchor 7.00 Ea. 199.98
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of
113 following size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm Make- 120.00 Mtr. 82.82
RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size
(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Make- RR Kabel,
Havells, Avocab, KEI, Johnson, Polycab, ADCAB
(h) 4 wire 6 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner
conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly -
116 Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC 20.00 Mtr. 24.24
insulation.(a) RG
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation
twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer
Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following
size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)
Unarmoured (2) Two Pairs
Providing & erecting Switch board for Computer or electric apparatus consisting of following
modular type accessories mounted with PVC / Metallic concealed/open box with single mounting
base frame covered with textured/metallic /white front plate,modules erected with necessary
connections as directed
118 1 no. 6A/16A universal plug-switch combined. 3.00 Ea. 1133.22
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type AccessoriesCat. III Make:- Honeywell, L&T, Crabtree,
Indoasian, M.K, Anchor
Decorative call bell Ting-tong box type 250 volts complete erected
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
120 LED driver efficiency > 85 % 8.00 Ea. 373.70
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of
ranges shown.)(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional
4 feetCat-lll Make;- Jaquar, Wipro, LT, Havells,Luker
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum
15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable
for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable
LAMP holder (ii) 5 to 8 watts Cat-III Make;- Jaquar, Wipro, LT, Havells,Luker
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of
3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company
mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver
122 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have 4.00 Ea. 7266.95
capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage protection.(iv) above 90 to 120 watts Cat.III
Make;- Jaquar, Wipro, LT, Havells,Luker
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking
capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed
thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only
Cat III Make- Indoasian, L&T, Schneider,ABB
providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Ea.
Make- Indoasian, L&T, Schneider,ABB
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS Ea.
8828/1996 with ISI Mark Cat.III Make- Indoasian, L&T, Schneider,ABB
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having
10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 Ea.
Amp. Cat.IIIMake- Indoasian, L&T, Schneider,ABB
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA
breaking capacity & confirms to IS :8828 in existing box having following capacity
(A) 40 Amp. Cat.III Make- Indoasian, L&T, Schneider,ABB
providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase
V,50Hz. having characteristic of quick action & tripping with all advance feature & do not
128 incorporate any electronic component. for following Max. rating erected as directed (ii) 40Amps. 3.00 Ea. 2235.13
DP Cat. III Make- Indoasian, L&T, Schneider,ABB
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of
129 MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per 1.00 Ea. 3412.79
phase isolation type (PPI)(b) sheet steel double door(iii)8 way Make- Indoasian, L&T,
Schneider,ABB
Providing and erecting Annealed bare Copper wire 8 to 16 SWG.
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having
back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter
testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-
<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long
time Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr Ea.
Back filling compound - 1 Nos Bag of 15 Kg.
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper
size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding,
132 grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of 8.00 Kg. 77.77
engineer in charge with necessary grouting, cementing, plastering & finishing complete.
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of
133 following size of cables(C) 4 core 10 Sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, 20.00 Mtr. 140.39
Polycab, ADCAB
(B) 4 core 6 Sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 2 to Ea.
4 core 6 Sq. mm
(C) 2 to 4 core 10 Sq. mm Ea.
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium Ea.
plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm
Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI
mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with
136 aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by 5.00 Ea. 1948.29
Engineer in charge)) Make:- USHA, BAJAJ, CROMPTON, HAVELLS, ORIENT
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly
137 painted for fan complete with proper insulation without leakage and earthing. 5.00 Mtr. 108.07
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm
length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected Ea.
concealed in Ceiling with necessary finishing.
Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with
139 necessary hook of 10 mm M.S. Round Bar. 5.00 Ea. 98.98
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS
body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II Make:- USHA, BAJAJ, Ea.
CROMPTON, HAVELLS, ORIENT
Providing & erecting approved make street light / wall mounting junction box compression moulded
from SMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in /
142 loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or 4.00 Nos. 616.10
bolt nut & earth bolt of following size.(B) 250mm x 194mm x 99 mm
Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (E) 10mm
143 0.60 sq.mtr 1927.08
Providing & erecting open well type horizontal mono block pump set with stainless steel body having
following specification (C) 1 H.P. single phase open well motor pump set suitable for 185 LPM
144 discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel.Cat. II Make:- 1.00 Ea. 9613.18
PRIMA, AMRUT, DUKE, LUBI. CROMPTON
Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A
range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as
145 per IS 13947 complete erected on P.W. Block with necessary connection. Cat-lll 1.00 Ea. 2100.80
Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and
size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of
threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with
146 1.00 Per Job 856.48
water(D)For Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP
Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper
cable approved make of following Size. (B) 2 Core x 2.5 Sq. mm.Make- RR Kabel, Havells, Avocab, Mtr.
KEI, Johnson, Polycab, ADCAB
Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating
material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm Ea.
Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB
Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB
Dismental Old Quarters And Credit Material (Detailed Description Below In BOQ)
Total Tender amount
Rupees Thirty One Lakh Ninety Seven Thousand Two Hundred Eighty Six And Paise Ninety Only
I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of
my/our tender works out as under.
No Rate In
Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount
* Estimated amount put to tender
Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________
Net Rs. ______________________ Total Rs. ______________________
In words ___________________________ In words __________________________
Item No. 151 : Dismental Old Quarters And Credit Material
Item No. 105 to 108 Dismental Old Quarters
Sr No Description of Item Quantity Unit Rate Amount
Demolition including stacking of serviceable materials and disposal of unserviceable material with all
105 lead and lift. (1) R.C.C Work 104.00 Cu.m 1082.35
Demolition of brick work and stone masonory including stacking of serviceable materilas and
106 disposal of unserviceable materials with all lead and liift (2) In cement Mortar 116.00 Cu.m 562.89
Dismentaling of sheet roofing including ridges , hips,valley,gutter etc. stacking of seviceable
materials and disposal of unseviceable materials with all lead and lift (2) A.C Sheet roofing. Sqm
Dismentling steel work including distemering and stacking the materials with all lead and lift.
Total Dismental Old Quarters Amount =
Item No. 105 to 108 Dismental Old Quarters Credit Material Details
Sr No Description of Item Quantity Unit Rate Amount
Brick Bats Cum
2 Steel 6400.00 Kg 35.00
3 Wood 100.00 No 20.00
4 G.I Sheet 162.00 Kg 30.00
Total Credit Amount =
Item No. 105 to 108 Dismental Old Quarters Credit Material Details Amount Difference
Sr No Description of Item Quantity Unit Rate Amount
1 Dismental Old Quarters Amount =
2 Credit Material Amount =
Credit Material Amount Difference Total = -34766.96
Notes 1 - All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.
Notes 2 - Rates quoted include clearance of site (prior commencement of work and at its close ) in all respects and hold good for work under all conditions, site, moisture, weather
Deputy Executive Engineer Executive Engineer
R & B (Pan) Sub Division R & B (Pan) Division
Palanpur Palanpur
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
001.SBD Book-Tdo Palanpur.pdf
002.SBD GR All Pdf.pdf
003.GR Building.pdf
004.BOQ-Tdo Palanpur.pdf
005.Test Schedule-Tdo Palanpur.pdf
006.Specification -Tdo Palanpur.pdf
007.Standard Specification for Electrical Work.pdf
tender condition-PQ (2).pdf
Copy of condition of elec sub-contractor-PQ.pdf
MOU Electrical Work 1 (2).pdf
General Specification (3).pdf
Download all tender documents and submit your bid