Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | ₹43.4 L Quoted ₹44.9 L | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹46.6 L+₹1.6 L (3.61%)Rejected-Finance | ₹46.6 L+₹1.6 L (3.61%) | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹47.5 L+₹2.6 L (5.79%)Rejected-Finance | ₹47.5 L+₹2.6 L (5.79%) | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹47.6 L+₹2.6 L (5.87%)Rejected-Finance RIO RANGRAT OLD AIR FIELD ROAD BUDAM KASHMIR PIN 190007 J K | BUDGAM | JAMMU AND KASHMIR | 190007 | ₹47.6 L+₹2.6 L (5.87%) | L4 | Rejected-Finance Other than lowest bidder |
| 5 | L5₹47.9 L+₹3.0 L (6.60%)Rejected-Finance | ₹47.9 L+₹3.0 L (6.60%) | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/s Aman Enterprises L6 | M/S RW INFRA L7 | M/S Ghulam Mustafa L8 | M/S DUTTA ENGINEERING WORKS L2 | GAGAN ASSOCIATES L4 | KASHMIR FAIR DEAL SERVICES L1 | M/S Hussani Enterprises Kargil L3 | M/s Raj Construction L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each without taking off shutters from the frames complete all as specified and directed by the Engg-in-Charge. | 8 | Each | 500 ₹4,000 | 515 ₹4,120 | 399 ₹3,192 | 265 ₹2,120 | 300 ₹2,400 | 250 ₹2,000 Lowest | 302 ₹2,416 | 350 ₹2,800 |
| 2.00 | Taking down chowkhats or frames not exc. 1.5sqm each complete all as specified and directed by the Engg-in-Charge. | 14 | Each | 450 ₹6,300 | 415 ₹5,810 | 229 ₹3,206 | 225 ₹3,150 | 220 ₹3,080 | 200 ₹2,800 Lowest | 294 ₹4,116 | 300 ₹4,200 |
| 3.00 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and directed by the Engg-in-Charge. | 47 | RM | 799 ₹37,553 | 801 ₹37,647 | 756 ₹35,532 | 701 ₹32,947 | 735 ₹34,545 | 700 ₹32,900 Lowest | 734 ₹34,498 | 800 ₹37,600 |
| 4.00 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by the Engg-in-Charge. | 24.31 | Sqm | 5,888 ₹1,43,137.28 | 5,955 ₹1,44,766.05 | 5,750 ₹1,39,782.5 | 5,620 ₹1,36,622.2 | 5,666 ₹1,37,740.46 | 5,500 ₹1,33,705 Lowest | 5,715 ₹1,38,931.65 | 5,900 ₹1,43,429 |
| 5.00 | S&F second class soft wood (KAIL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by the Engg-in-Charge. | 0.27 | Cum | 1,20,000 ₹32,400 | 1,21,000 ₹32,670 | 1,65,000 ₹44,550 | 90,100 ₹24,327 Lowest | 99,999 ₹26,999.73 | 95,000 ₹25,650 | 90,750 ₹24,502.5 | 99,000 ₹26,730 |
| 6.00 | S&F second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by the Engg-in-Charge. | 12 | Sqm | 3,701 ₹44,412 | 3,715 ₹44,580 | 3,612 ₹43,344 | 3,550 ₹42,600 | 3,555 ₹42,660 | 3,500 ₹42,000 Lowest | 3,615 ₹43,380 | 4,100 ₹49,200 |
| 7.00 | S&F 30mm thick second class soft wood (KAIL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by the Engg-in-Charge. | 7.44 | Sqm | 3,201 ₹23,815.44 | 3,255 ₹24,217.2 | 3,150 ₹23,436 | 3,020 ₹22,468.8 | 3,100 ₹23,064 | 3,000 ₹22,320 Lowest | 3,090 ₹22,989.6 | 3,750 ₹27,900 |
| 8.00 | S&F butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed by the Engg-in-Charge. | 12 | Each | 168 ₹2,016 | 171 ₹2,052 | 170 ₹2,040 | 110 ₹1,320 Lowest | 150 ₹1,800 | 120 ₹1,440 | 119 ₹1,428 | 130 ₹1,560 |
| 9.00 | S&F butt hinges medium weight cold rolled mild steel of 75 mm long complete all as specified and directed by the Engg-in-Charge. | 16 | Each | 142.6 ₹2,281.6 | 145 ₹2,320 | 140 ₹2,240 | 135 ₹2,160 | 133 ₹2,128 | 100 ₹1,600 Lowest | 149 ₹2,384 | 120 ₹1,920 |
| 10.00 | S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed by the Engg-in-Charge. | 8 | Each | 142.6 ₹1,140.8 | 146 ₹1,168 | 135 ₹1,080 | 125 ₹1,000 | 123 ₹984 | 100 ₹800 Lowest | 139 ₹1,112 | 120 ₹960 |
Tender Value
₹40.2 L
EMD Value
₹80,500
Closing Date
17 Jun 2026, 6:00 pmClosed
Garrison Engineer Kargil
Office of GE Kargil, Pin-908121, C/o 56 APO
CA NO. GE/K-33/2026-27 - SPL REPAIR OF BLDG NO T-393 (MESS STAFF LINE AND BATHROOM), JCO LIVING AT 121(I) INF BDE, T-26 (WELDER SEC) OF 851 FD WKSP, T-261, T-23B, T-21B, T-466B (COY TOILET) OF 22 KUMAON AND BLDG NO T-95 OF 163 INF BN TA UNDER GE KARG
2026_MES_768265_1
CA No. GE/K-33/2026-27
Open Tender
Civil Works
Item Rate
180 days
Kargil
Please refer Tender documents
9 documents required · 9 mandatory
₹500
GE Kargil
₹80,500
1 Aug 2026
27 May 2026
18 Jun 2026
27 May 2026
17 Jun 2026
10 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each without taking off shutters from the frames complete all as specified and directed by the Engg-in-Charge. | 8 | Each | - | - |
| 2 | Taking down chowkhats or frames not exc. 1.5sqm each complete all as specified and directed by the Engg-in-Charge. | 14 | Each | - | - |
| 3 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and directed by the Engg-in-Charge. | 47 | RM | - | - |
| 4 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by the Engg-in-Charge. | 24.31 | Sqm | - | - |
| 5 | S&F second class soft wood (KAIL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by the Engg-in-Charge. | 0.27 | Cum | - | - |
| 6 | S&F second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by the Engg-in-Charge. | 12 | Sqm | - | - |
| 7 | S&F 30mm thick second class soft wood (KAIL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by the Engg-in-Charge. | 7.44 | Sqm | - | - |
| 8 | S&F butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed by the Engg-in-Charge. | 12 | Each | - | - |
| 9 | S&F butt hinges medium weight cold rolled mild steel of 75 mm long complete all as specified and directed by the Engg-in-Charge. | 16 | Each | - | - |
| 10 | S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed by the Engg-in-Charge. | 8 | Each | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tender332627.pdf
Tender Documents • 1.16 MB
BOQ_860359.xls
BOQ • 1.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .