RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Refrigerated Centrifuge For General And Research Purpose ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Standards Conformity to standards European CE (Notified Body)With 4 Digit Notified Body No. European CE (Notified Body)With 4 Digit Notified Body No. Certificate date and number - * 1/6 Performance Parameters Purpose To Centrifuge different kinds of samples in different Testing Labs and research Labs at room Temperature * Centrifuge design Bench Top * Weight including Rotor in kgs 70 * Maximum RPM with no load 20000 * "Number of steps of RPM Variation available in the settings (correspondingly RCF also varies) " 10 * RPM setting accuracy plus minus 5% * Type of Motor Brushless(without carbons) Brushless(without carbons) Accessories Spanner to tight or loose Nut of Rotor on Motor shaft head puller
Requiredspare rotor nuts
Requiredfuse-2
RequiredInstruction Manual Book
Requiredinstallation CD * Type of lid lock Both Manual and Electronic * Maximum Noise level whemn working at 1 meter distance in db 55 * Ambient operating Temperature range in Degree centigrade Celsius and humidity range 0 to 50 and Relative humidity 15 to 90% * Rotor imbalance diagnostics and automatic stop if required Yes * No of accelaration and decelarion profiles in built for rotor speed while automatic braking "Programmable from 50 to 200 Seconds in Interval of 5 Seconds" * Maximum timer set point 60 minutes * Parameters to be displayed by the digital display RPM
RequiredRCF
RequiredSet time
RequiredRun time
RequiredRotor running indication
Requiredimbalancing if any * 2/6 Display Type LCD * Speed controller Microprocessor controlled pre programmed speed controller which can control RPM as well as RCF * Speed Control tolerance in case of set speed (Plus minus RPM ) in percentage 5 * Temperature controller Micro processor based PID Digital temperature controller cum Indicator
Required(With LCD Display) to control the Temperature from +40° C up to -20°C * Configuration of Rotor supplied with centrifuge machine Angle rotor Angle rotor Rotor Feature with reference to Autoclavability Autoclavable Rotor @121 Degree Celsius * Type of Tubes which can be used with centrifuge machine Polypropylene Centrifuge tubes and Glass centrifuge tubes * Size of rotor supplied with centrifuge in ml "6x50 mL(for angle rotor) RPM 13000"
Required"24x1.5ml(for angle rotor) RPM 16000"
Required32x15ml(FOR swing out type rotor RPM 5000)
Required"24 x 0.5 ml( for angle rotor) RPM 20000" "24 x 0.5 ml( for angle rotor) RPM 20000"
Required"24x1.5ml(for angle rotor) RPM 16000"
Required32x15ml(FOR swing out type rotor RPM 5000)
Required"6x50 mL(for angle rotor) RPM 13000" Maximum RCF 21000 * Power supply 220 Volts 50 Hz AC ± 10% * Power consumption in watts 200 * Length of the Centrifuge in mm 640 * Width of the Centrifuge in mm 730 * Height of of the Centrifuge in mm 330 * Length of Power cord in meters 3 * 3/6 Refrigerant should be CFC free Yes * Temperature of refrigerator in degree Celsius upto -20°C * Cooling arrangement Through suitable compressor
Requiredradiator
RequiredCooling fan and its Cooling Kit * Temperature control accuracy ± 2°C * Warranty period for equipment & Rotor (on site and comprehensive warranty) in years 1 1 Maximum Noise level when working at 1 meter distance in db 60 * Material Parameters Assembly Material for manufacture of Centrifuge Die cast Aluminum
RequiredAluminum sheet
RequiredStainless Steel
RequiredCRC Steel
RequiredPlastic and Rubber * "Lid Material of Centrifuge " CRC Steel finish with powder coating or stove painting or ABS Plastic of injection moulding * Body material of Centrifuge C.R.C Steel Finish with Powder Coating/Stove Painting. * Front Panel of centrifuge CRC Steel finish with powder coating or stove painting or ABS Plastic of injection moulding * Centrifuge Bowl material in Centrifuge Double walled with PUF Insulation to avoid loss of Cooling. Inner Chamber made of 304 Quality Stainless Steel Moulded * Material of Rotor Aluminium * Additional Parameters Condensed Water Drainage System No No The Equipment shall be installed and demonstrated before Acceptance Yes Yes 4/6 Servo Controller Voltage Stabilizer supplied with Item Yes Yes Servo stabilizer ratings in KVA 2 2 Warranty of stabilizer in years 3 3 Auto cut off Yes * Timer provided Yes * Reports Certifications of Manufacturer ISO 9001:2015 * ISO Certificate date and number - * Copies of all certifications and reports to be provided to buyer on demand at time of supplies Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
