REPAIR AND MAINTENANCE OF STREET LIGHT POST LIGHTS INCLUDING CONNECTED WORKS IN SOUTH CAMPUS UNDER GE IMA DEHRADUN

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth in soft/loose soil for laying/taking out under ground cable and getting out the excavated soil complete all as directed.

Returning, filling in trenches including spreading, leveling, watering and well roaming in layers not exceeding 25 cm thick in soft/loose soil after cable laid and testing complete all as directed.

Removing the excavated out side IMA premises and depositing where directed at a level not more than 1.5 m above the strutting point complete all as directed.

Material and labour for sand cushioning to under ground cables 8 Cm thick before laying the cable and 15 Cm, thick after laying, stretching and testing the cable complete all as directed. Note: Punned thickness shall be measurement and paid.

Material and labour for un-reinforced precast concrete cable cover LV type I, flat size 250 mm X 150 mm X 40 mm as protection to underground cable laid dry and flat adjoining each other complete all as directed.Make:- Tulip Infrastructure, Jain tiles, NTC Panchkula

S&F double wall corrugated pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed. Make:- Astral Ltd(Brand-HDPE Pro), RC Plasto Tank & Pipes Ltd,Finolex :-

S&F double wall corrugated pipe for laying of electric cable of size 63mm outer diameter and 51mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed. Make:- Astral Ltd(Brand-HDPE Pro), RC Plasto Tank & Pipes Ltd,Finolex:-

Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping of poles/stays including form work and dismantling of existing PCC complete all as directed.

Material and Labou for cement concrete 1:4:8 type D2 ( using 40 mm graded crushed stone aggregate) for foundation of pole/stay including form work and dismantling of existing PCC complete all as directed.

Material and Labour for galvanised steel tubes light grade 40 mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as directed.

Material and Labour for galvanised steel tubes light grade 50 mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as directed.

Material and Labour for galvanised steel tubes light grade 40 mm bore for bracket of street/security light length 1.20RM including welding, bend to shape and fixed with 2 SET 40X3MM FI clamp including nuts and bolts complete all as directed.

Supply and fix LED street light fitting 60 watt energy saving and enviromental friendly long liife made up of pressure die cast aluminium housing with high power LED as lightnig source and lens embedded PC cover having top opening seprate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device suitable for pole dia 43 mm (max) including taking down existing fitting of any type and in any position complete all as directed. Make: Philips, Havells Crompton

Supply and fix LED street light fitting 70 watt energy saving and enviromental friendly long liife made up of pressure die cast aluminium housing with high power LED as lightnig source and lens embedded PC cover having top opening seprate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device suitable for pole dia 54 mm (max) including taking down existing fitting of any type and in any position complete all as directed. Make: Philips, Havells Crompton

Supply and fix LED street light fitting 90 watt energy saving and enviromental friendly long liife made up of pressure die cast aluminium housing with high power LED as lightnig source and lens embedded PC cover having top opening seprate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device suitable for pole dia 54 mm (max) including taking down existing fitting of any type and in any position complete all as directed. Make: Philips, Havells Crompton

Supply and fix LED street light fitting 120 watt energy saving and enviromental friendly long liife made up of pressure die cast aluminium housing with high power LED as lightnig source and lens embedded PC cover having top opening sepate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device suitable for pole dia 54 mm (max) including taking down existing fitting of any type and in any position complete all as directed. Make: Philips, Havells Crompton

Supply and fix LED flood light fitting 50 watt energy saving and enviromental friendly long life exclusive innovative made up of pressure die cast aluminium housing with high power LED as lightnig source, suitable for highlighting archtectural features or area lighting also suitable for rough services/ installations including taking down existing fitting of any type and in any position complete all as directed. Make:Philips, Havells, Crompton

Supply and fix LED flood light fitting 120 watt energy saving and enviromental friendly long life exclusive innovative made up of pressure die cast aluminium housing IP66 with high power LED as lightnig source, suitable for highlighting archtectural facade and general purpose lighting including taking down existing fitting of any type and in any position complete all as directed. Make:Philips, Havells Crompton

Supply and fix LED flood light fitting 150 watt energy saving and enviromental friendly long life exclusive innovative made up of pressure die cast aluminium housing IP66 with high power LED as lightnig source, suitable for highlighting archtectural facade and general purpose lighting including taking down existing fitting of any type and in any position complete all as directed. Make:Philips, Havells Crompton

Supply and fix LED flood light fitting 200 watt energy saving and enviromental friendly long life exclusive innovative made up of pressure die cast aluminium housing IP66 with high power LED as lightnig source, suitable for highlighting archtectural facade and general purpose lighting including taking down existing fitting of any type and in any position complete all as directed. Make: Syska, Philips, Havells Crompton

Supply and fix post top light fitting 25 watt energy saving and enviromental friendly long liife aesthetically designed with symmetrical light distribution, spun aluminiun landscape luminaire with high power LEDs as light source, suitable for pole dia 76 mm (max) including taking down existing fitting of any description complete all as directed. Make: Philips, Havells Crompton

Supply and fix pole mounted LT junction box, Water proof and fire proof, sheet moulding compound (SMC) Sintex make box of inside size 250 mm x 200 mm x100 mm deep complete with 4 nos terminal end aluminium strip of 20 x 4 mm size fixing cable end terminal and 3 nos MS bolts and nut of size 8 mm dia x 30 mm long and MCB mounting rail with 6 Amp MCB SP duly welded with box fixed on plle with MS clamp 25 mm x 3 mm MS strip duly painted and testing including taking down existing complete all as directed. Make: Sintex, Havells, Indo Asian, Shalabh

Supply and fix shock proof and rust proof pole mounted junction box of size 140mm x 140mm x 90mm for garden lighting system complete with all accessories and including MCB SP 6 Amp, 100 Amp rated heavy aluminium bus bar mounting on shaddle, 2 terminals, pole clamp with nut bolts etc with necessary mounting arrangement in the junction box with pole all as specifed and directed.Make: Sintex Industries Ltd/ Supreme Industries/ Naithani Plastic Moulding Works.

Material and Labour for bus bar chamber pedestal type of size 75 cm x 60 cm x 40 cm out door dust & vermin proof front opening made out of 2.0 mm thick MS sheet duly painted and consisting with aluminium bus bar 3 phase and neutral 4 Nos 200 Amp fixed on insulators and one MCCB FP 160 Amp, 25 KA rupturing capacity including fixed in PCC 1:3:6 using 20 mm graded crushed stone aggregate including danger plate etc including taking down existing LT feeder bus bar complete all as directed.

Supply and fix street light control panel AC, outdoor type, pole/flour mounted made from 2.00 mm thick MS sheet min size 50 cm x 40 cm x 12 cm deep complete with 4 Nos mounting bolts of size 10 mm dia x 50 mm long fixed with 20 mm x 4 mm size MS strip with astronomical timer, contractor of 65 Amp rating 3 phase 1 Nos, MCB TPN 63 Amp of capacity 01 Nos, of capacity 12 KW including taking down existing panel complete all as directed. Make: Havells, L&T, Legrand.

Supply and fix street light control panel AC, outdoor type, pole/flour mounted made from 2.00 mm thick MS sheet min size 50 cm x 40 cm x 12 cm deep complete with 4 Nos mounting bolts of size 10 mm dia x 50 mm long fixed with 20 mm x 4 mm size MS strip with astronomical timer, contractor of 65 Amp rating Single Phase 1 No MCB SPN 63 Amp 12 KW including taking down existing panel complete all as directed Make: Havells, L&T, Legrand.

Taking out existing old damaged / unserviceable LT UG cable, PVC/XLPE insulated any size, steel strip /wire armoured multistranded aluminium conductor cable from trench /duct /pipe. etc of any sizes complete all as specified and as directed.

Supply and fix XLPE cable insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq mm 3.5 core complete all as directed.

All as per items No 28 about but size 95 Sqmm 3.5 core

All as per items No 28 about but size 70 Sqmm 3.5 core

All as per items No 28 about but size 50 Sqmm 3.5 core

All as per items No 28 about but size 16 Sqmm, 4 Core

All as per items No 28 about but size 10 Sqmm, 4 Core

All as per items No 28 about but size 6 Sqmm, 4 Core

Material and Labour for cable jointing kit for 1100 V grade cable for indoor/outdoor End joint heat shrinkable type complete with jointing material suitable for 16 to 50 sq mm 3.5/4 core PVC/XLPE insulated and sheathed armoured cable complete all as directed. Make: Denson/M Seal/Cabseal. (Earth work shall be measured and paid saperately)

All as per items No 35 about but Size 70 to 150 sq mm 3.5/4 core

Material and Labour for cable jointing kit for 1100 V grade cable for straight through joint heat shrinkable type complete with jointing material suitable for 16 to 50 sq mm 3.5 core PVC/XLPE insulated and sheathed armoured cable complete all as directed. Make: Denson/M Seal/Cabseal. (Earth work shall be measured and paid saperately)

All as per items No 37 above but size 70 to 150 Sqmm, 3.5 core

Material and Labour for painting of 9 meter long steel street light pole complete with one coat of synthetic enamel aluminium paint and preparation of surface including writing of pole Nos with black enamelled paint not less than 100mm height complete all as directed.

Supply and fixing in replacement of old u/s digital 24 Hr timer suitable for street light control panel AC complete all as directed. Make : L&T cat part No. 67DDTO or equivalent model in Siemens, Legrand.

Material and labour for MCB SPN 63 Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete all as directed.

Material and labour for MCB TPN 63 Amps, 415 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete all as directed.

Material and Labour for PVC wire with copper conductor 1100 Volts grade Cross section area of size 1.5 Sq mm 3 Core laid in trenches/pole complete all as directed.

Material and Labour for steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 31, including painting with anti corrosive paint internally complete and externally complete with two coat of synthetic enamel aluminium paint over a coat of red oxide primer and preparation of surface including marking of pole Nos with black paint complete all as directed.

Material and labour for MCCB 100 Amps,4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as directed.

Material and labour for MCCB 125 Amps 4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as directed.

Supply and fix Bollard light pressure die cast powder coated housing PC deffuser efficient high output LED with IP-65 including all fixing arrangement,PCC work and elect connections complete all as specified and directed.

Suppl and fixing of RGB flood light made up of aluminium die cast with powder coated finish and having system wattage 45 wat. Fixture must have IP 65 & Ik08 protection. Fixture must be plug & play feature for hassle free installation nd must be controlled through android app. Lifeclass of the fixture should be 50K hors@35 degree celcious temprature. Working temp range of the fixture should be -10 degree Celcious to +45 degree celcious. Make Philips/Crompton/Wipro

Supply and fix excellency steered colour changing (RGB) LED light 70 watt made of high strength aluminium die cast, toughened glass cover, high strength impact resistance including fixing arrangment such as pipe, nut, bolts and washers complete including components all as directed. Make:Havells /Philips/Wipro.

Supply and fix excellency steered colour changing (RGB) LED light 24 watt made of high strength aluminium die cast, toughened glass cover, high strength impact resistance including fixing arrangment such as pipe, nut, bolts and washers complete including components all as directed. Make: Havells /Philips/Wipro.

Earthing complete for machinery equipment installed at power house/sub station with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and protected with 40 mm dia light grade GI pipe all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6 mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10 mm thick plaster in cement mortar 1:4, pre cast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) 40 mm thick cover, reinforced with 8 mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 40 mm dia GI light grade earth lead protection pipe etc complete all as per electrical plate No 3 of SSR Part-I (2009) and as specified and directed. Note: (i) Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth lead & protection pipe, if any, required at site shall be measured and paid for separately under appropriate item of BOQ. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

JS CONSTRUCTION COMPANY

Balraj and Co

Mani Control System

innovative associates

Deven Associates

ANAND SERVICES

PARADISE INFRA POWER COMPANY