Special repair to bldg T-105, T-118 and T-120 at AFS Jodhpur and Provn of deficient geysers ceilling fans exhust fans and fire alarm smoke sensor at power house and station armory at AFS Mandore

Amount

Special repair to bldg No. T-105, T-118 & T-120 at AFS Jodhpur and Provn of deficient geysers, ceiling fans, exhaust fans and fire alarm smoke sensor at power house and station armory at AFS Mandore.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.00 sqm each of any description incl making good the disturbed surfaces complete all as spd and as directed.

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge

Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 9.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and as directed

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

All as per item No.12, but 20mm dia

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to 20mm bore complete all as spd.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Disconnecting existing water tanks exc 500 ltrs but n exc 1000 ltrs cap setting aside (or lowering if required) for repair cleaning etc and hoisting if required reconnecting and refixing in position. (cleaning repairing etc measured separartely) complete all as spd.

Disconnecting existing water tanks exc 250 ltrs but n exc 500 ltrs cap setting aside (or lowering if required) for repair cleaning etc and hoisting if required reconnecting and refixing in position. (cleaning repairing etc measured separartely) complete all as spd.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed by Engr-in-Charge.

S&F framed work such as grills gratings etc with ends of bars shoulders and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar works conforming to Fe 290 gde E-165.

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

S&F in repairs stainless steel curatin rod , having outer dia 25 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge.

S&F in repairs Stainless Steel cap for curtain rod for 25mm dia curtain rod as directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in repairs floor door stopper, with 150 mm long, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beading in square n.exc. 0.5 sqm in each paneand complete all as specified.

M & L for 75mm thick Plain Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed by EIC.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, set and jointed in CM (1:4) with grey cement and With pigment complete all as specified and as directed.

M&L for Pre-cast cement concrete factory made kerb stone with 1:3:6 type C1 (20mm graded Stone aggragate) solid blocks, exc. 10 cm in width and setting in mortar,CM 1:6 complete all as specified and directed.

Complete removal of existing treatment surface of walls and applying two coats of wheather proof exterior emulsion paint complete all as specified and all as directed

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for preparation of old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying two coat of oil emulsion distemper over two coat of wall care putty complete all as specified & directed.

Dismantling of existing treatment of roof surface and Wire brushing , cleaning top surfaces of tarrace or cement concrete including flashing and junction of parapets complete all as specified and directed by Engr-in-Charge.

M&L for one coat of applied cold bituminous primer @ 0.5 kg/Sqm shall be applied on plastered surfaces including side wall all as specified and directed.

M&L 10 mm thick plaster with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately & complete all as specified and directed by Engr-in-Charge.

M/L for cement concrete B-1. 1:2:4 (20mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 25 mm in slop 1:40 over roof & complete all as specified and directed by Engr-in-Charge.

M/L APP modified membrane minimum weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

Pressed steel frames of size 125x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified.

M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded cruhed stone agg as in seismic and other similar bands shelves coping bed plates hold fasts plinth courses filling in pressed steel frame and the like finished fair and even incl necessary from work complete all as specified & directed.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of doors shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately complete all as specified and directed by Engr-in-Charge.

Supply and fixing Factory made plain, framed, panelled shutters , 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

M&L for preparation of wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer and complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

Supply and fixing stainless steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

Material & Labour stainless steel barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

Supply and fixing stainless steel fabricated type extruded handles of size 150 mm complete all as specified & directed.

Material & Labour for 75mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection/path finished fair and even without using extra cement complete all as spd & directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

M&L for rendering 15mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

Supply only integral water proofing compound ISI Marked

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper,over two coat of wall care putty complete all as specified & directed.

M&L for preparation of new plastered or unplastered surface of walls and applying two coats of wheather proof exterior emulsion paint complete all as specified and all as directed

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair Brass chromium plated shower rose 125mm size with arm

M&L for powder coated anodised aluminium frame for door window & ventilator with one or more rebates including joining cleat for fixing etc comlete all as specified.

S&F MS powder coated louvers with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as diredcted.

M&L for Raking out joints/ pointing to CM 1:4 to stone slab or precast concrete slab floor, any description, laid flat edge in floors, surface channels, roofs, etc ,& to self faced/ rough dressed stone slab or precast concrete slab floors, any description, laid flat complete all as specified and as diredcted.

M&L for Providing precast cement concrete solid building blocks type 1:3:6 type C-1 (20mm graded aggregate) slabs 10cm thick (with plain or interlocking joints as directed)setting in mortar, complete, in walls complete all as specified and as diredcted.

M&L for Cement concrete in surface channels and drains type 1:2:4 B-2, (40mm graded aggregate) complete all as specified and as diredcted.

M&L for extra for forming fair finishing drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia etc cpmplete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.

S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F 75mm dia PVC (SWR) junction single, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.

S&F 110mm dia PVC (SWR) junction single, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.

S&F 110mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F 110mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor,FRLSH, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of grooves cuting and modular plate for mounting switches, sockets & regulators as required at site.

One light point controlled by one switch one way.

One fan point controlled by one switch one way.

One 3 pin 5 Amp switch & socket outlet on same board with other switches.

One 3 pin 5 Amp switch & socket outlet on Independant board.

All same as per item ser No 93.00 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, FRLSH, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.

supply and Fixing in repair switch modular single pole one way 6 Amps 230 volt 1 module.

supply and Fixing in repair switch modular single pole one way 16 Amps 230 volt 1 module.

S&F in repair Socket modular 6 Amp 2/3 pin combined two module.

S&F in repair Socket modular 6&16 Amp 2/3 pin combined two module.

S&F Stepped type modular electronic fan regulator, switch size, flush type 230V AC.

S&F Ceiling rose Modular surface bakelite 65x50mm three terminal.

S&F Lamp holder modular insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

Taking down carefully Ceiling fan/Exhaust fan by disconnecting electrical connections, unsecrewing from position, dismantling blades, stacking carfully at site for reuse of serviceable fans complete all as directed and specified.

Fixing only light fitting any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing in repair of LED lights fitting 1x 22W, 230V,AC decorative Glaze ultra aluminium box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make-jaguar item code-LGLZU1X022XN or equivalent technocommercial approved make.

Supply and fixing in repair of LED lights fitting 1x 10 W, 220V,AC including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make -Jaguar item code -LGLZ01X010XC or equivalent technocommercial approved make.

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all as per Havells Cat No: ENDURAPEARLSL25W or equivalent technocommercial approved make.

S&F LED light fitting 1 x 10W bulkhead luminaires including inbuild LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Hanging only ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories and making connection from ceiling rose or connector to fan using three core 0.75sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire complete all as specified.

Fixing only exhaust fan 300mm sweep, Steel/PVC body AC single phase 230V of size 300m using 4 Nos 10mm x 100mm long wall fasteners, nut and washers and connecting up using flexible three core 0.5 sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire through PVC flexible conduit from ceiling rose/connector to fan complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

S&F Exhaust fan 300 mm sweep, copper wounded, four blade, metal body, BEE approved/ISI marked, air delivery shall not be less than 230 CFM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

M&L for Sub main wiring as per IS, single core FRLS PVC insulated flexible multistranded copper conductor,FRLSH, 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 6.0 Sq.mm main Phase-Neutral supply cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire in green color.

Supply and replace sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and blank plates and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all around of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

Supply and fix energy efficient (not less than 3 star rating) electrical geyser, 25 liters capacity white/half white, superior polymer/glasslin coating steel inner tank with minimum 8 bar pressure rating, with energy saving insitu PUF, with all in built safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and advanced 3 level safety including accessories like thermostat, pressurer release valve/presure reducing valve, non return valve, connecting PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed as per manufacturers recommendation, making necessary connection & testing on completion complete all as directed. Make-RACOLD/BAJAJ/USHA/HAVELLS/CROMPTON Note : Quoted rates deems to be inclusive cost of wall fasteners required for hoisting geysers. Any defect during warranty period shall be rectified by contractor from original manufacturer. All warranty card duly ink signed/office seal from distrubuter shall be handed over to MES on completion.

M & L Point wiring complete with 1100 volts grade, single core, PVC insulated FRLSH cable with multy-stranded copper conductor of size 4 sqmm nominal area, drwan through and including rigid,non-metallic PVC conduit pipe of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLSH cable with multy-stranded copper conductor of size 4.0 sqmm nominal area, as continuous earthing wire connected to common earth dolly including 1.6mm thick fabricated MS sheet/electroplated terminal box, for mounting switches/ switch socket combination/ fan regulators terminal box, for mounting switches/ switch socket combination/ fan regulators etc covered with 3mm thick hylam sheet complete for one 15 Amps switch socket out let point on indipendent board or conecting with one industrial metal clad plug and socket with MCB SP all as specified and as directed.

Supply and fix sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Cutting existing steel water tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fittings (i.e. union, nipple, reducing tee) for branch connection of internal dia 15mm.

Supply & fixing GI tubing medium grade galvanised with all fittings to fixed to walls/ceiling or laying in floors all as directed for the size of 15mm bore dia.

Supply & fix Bib taps 15 mm brass chromium plated, quarter turn with curtch or butterfly handle complete all as specified and as directed. Minimum weight shall be as per IS/SSR Part-I specifications.

Supply & fix angle valve brass chromium plated quarter turn screwed type suitable for size 15 mm dia bore pipe complete all as specified and as directed. Minimum weight shall be as per IS/SSR Part-I specifications.

Supply & fix HOT and COLD PVC water connections pipe 450mm long, stainless steel braided and CP brass check nuts and rubber washers at both ends suitable for fixing with 15mm bore pipe/nipple complete all as specified and as directed. Make-Havells/Cropton/MLD/Swastik or equivalent in approved make list of CA.

S&F Exhaust fan 300 mm sweep,70 Watt , ISI marked, heavy duty, metal body, four blade, air delivery shall not be less than 1770 CFM at 1450 RPM mounted in suitable opening arrangement with louvers shutters suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

M&L for cutting holes For exhaust fan 300mm diameter for preparing opening through brick/stone masonary wall for fixing exhaust fan 300mm sweep, making good to damaged surface of wall, make a smooth circular surface and match with specification of existing wall all as directed by Engr-in-charge at site

Supply and fixing wall mounted fans complete with blades and accessories, 230 V, 400 mm sweep including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

Supply, installation, testing & commissioning of detectors complying with and type certified to EN-45 Addressable type multi sensor with heat and smoke combination, mounting base, complete all as specified and directed.

Supply, installation, testing & commissioning of wall mounted sounder with strobe lights, back plate, control module complete all as specified and as directed..

Supply & laying of cable 1100 volt grade, PVC insulated, FRLS 2C X 2.5Sq mm multistranded copper conductor , fixed on wall/ceiling including pvc conduit pipe complete all as specified and directed.

Supply, installation, testing & commissioning of Addressable Control Panel 40 device/2 Zone Microprocessor based Addressable Main Fire Alarm digital display panel Input AC power supply, automatic battery charger,display panel Input AC power supply, automatic battery charger12 volts sealed maintenance free lead acid batteries sufficient for 8 hours normal working and capable of operating the system for 60 minutes during emergency conditions, complete with log facility.

Supply and fixing fire alarm sounders/sirens electronic type horizantal two stage continous normal operation atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 m with sound output variation of + 5 db 2000 m range complete all as specified and directed.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC casing capping / PVC Conduit with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for followings:-

One light point controlled by one one switch one way.

One socket out 3 pin 5 Amps on the independent board.

All as per item No 133.00 here-in-before but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

JAMWAY MATA CONSTRUCTION COMPANY (BID ID -3186638)

psj build solutions and company (BID ID -3182377)