REPAIR / MAINT OF PUMPING MACHINERIES, CLEANING OF OH TANKS, SUMPS AT MIC and S AREA, REPAIR TO EXTERNAL WATER SUPPLY DISTRIBUTION LINES, CONTROL VALVES AND ALLIED WORKS AND REPAIR TO AC PLANT PACKAGE TYPE, ACs and OTHER COOLING APPL AT AHILYANAGAR

Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 50 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed. Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge.

All as per serial item No 1 but pump set of capacity 25 HP.

All as per serial item No 1 but pump set of capacity 15 HP.

All as per serial item No 1 but pump set of capacity 10 HP.

All as per serial item No 1 but pump set of capacity 7.5 HP.

All as per serial item No 1 but pump set of capacity 5 HP.

Supply only gland sleeve for 25 to 50 HP pump set complete all as directed.

Supply only gland plate with gland packing, CI, for 25 to 50 HP pump set including nuts and bolts complete all as specified and as directed

Supply only gland plate with gland packing, CI, for 5 to 15 HP pump set including nuts and bolts complete all as directed

Supply only water retaining (Deflector) ring for 25 to 50 HP pump set complete all as directed

Supply only water retaining (Deflector) ring for 5 to 15 HP pump set complete all as directed

Supply only spilt linter ring, CI, for 25 to 50 HP pump set complete all as directed

Supply only spilt linter ring, CI, for 5 to 15 HP pump set complete all as directed

Supply only cartridge for bearing for 25 to 50 HP pump set complete all as directed

Supply only cartridge for bearing for 5 to 15 HP pump set complete all as directed

Supply only shaft sleeve, CI, for 25 to 50 HP pump set complete all as directed

Supply only shaft sleeve, CI, for 5 to 15 HP pump set complete all as directed

Supply only stuffing box (Throat), CI, for 25 to 50 HP pump set complete all as directed

Supply only stuffing box (Throat), CI, for 5 to 15 HP pump set complete all as directed

Supply only set of gasket for 25 to 50 HP pump set complete all as directed

Supply only set of gasket for 5 to 15 HP pump set complete all as directed

Supply only set of 'O' ring for 25 to 50 HP pump set complete all as directed

Supply only set of 'O' ring for 5 to 15 HP pump set complete all as directed

Supply only wear ring, for 25 to 50 HP pump set complete all as directed

Supply only wear ring, for 5 to 15 HP pump set complete all as directed

Supply only impeller, CI for 25 to 50 HP pump set complete all as directed

Supply only impeller, CI for 10/ 15 HP pump set complete all as directed

Supply only pump shaft CI for 25 to 50 HP pump set complete all as directed

Supply only pump shaft CI for 10/ 15 HP pump set complete all as directed

Dismantling and taking down unserviceable electric motor of 50 HP capacity of pump set from foundation and transportation to workshop for repairing, opening and rewinding with new super enamelled copper insulated winding wire as per existing gauge of copper wire, winding with insulating material, varnishing, heating etc and reassembling, transporting back to site of work and installing on existing foundation including proper alignment and testing complete all as specified and as directed. Note :- All disturbed surfaces shall be made good to match the existing surfaces without any extra cost to the department.

All as per serial item No 30 but electric motor of 25 HP capacity of pump set complete all as directed.

All as per serial item No 30 but electric motor of 10/ 15 HP capacity of pump set complete all as directed.

All as per serial item No 30 but electric motor of 5/ 7.5 HP capacity of pump set complete all as directed.

S&F in repairs ball bearing suitable for 50 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 25 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 10/ 15 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 5/ 7.5 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 50 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 25 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 10/ 15 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed

S&F in repairs ball bearing suitable for 5/ 7.5 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed

S&F in repairs, coupling bushes with studs of existing type and size suitable for 10 HP to 50 HP pump set all as specified and as directed.

S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 10 HP to 50 HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed.

M&L for repairs to foundation of motor pump set of 50/ 25/ 15 HP by removing and taking out pump motor from foundation by unscrewing the nuts bolts and keeping away, dismantling old foundation, providing new foundation of MS channel MC 75 to MC 150 size, angle section as required at site as directed and strengthing the foundation plate, tightening/ screwing with SS nut bolts, providing UPVC pipe for drainage of water and re-fixing of motor on foundation including welding at proper connections, replacement of foundation nut bolts, washers, with accurate realignment of motor with pump to avoid vibration and to provide smooth running of pump on full load, testing and commissioning complete all as directed. Note:- The quoted rate shall be deemed to be inclusive of all civil works including PCC 1:2:4, type B2 as in foundation and grouting work including necessary form work, plaster etc complete as directed.

S&F in repairs, Pressure gauge complete set with GI bend pipe, nipples, operating switch / valve of capacity 0-100 kgf/sq cm as per sample suitable for 15 to 150 HP pump set complete all as specified and as directed.

Supplying Water testing report from Govt. approved testing center which includes organoleptic and physical parameters to prove the potablity of water from any pump house and the water sample shall be taken jointly by the contractor and rep of Engr-in-Charge for testing of essential characteristics, bacteriological examination all as directed by Engineer-in-Charge.

S&F in repairs, single phase preventor, suitable for 100/90/75/60/25 HP pump set starter, 415/440 Volt, 50 Hz all as specified and as directed.

S&F in repairs, 3 pole power contactors, TYPE -MNX -70 conforming to IS Amp rating 70 Amps (MNX70) fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-4 starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-6 starter complete all as specified and as directed.

S&F in repairs 3 pole power contactor ML-2, TP 32 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed.

S&F in repairs 3 pole power contactor ML-3, TP 40 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed.

S&F in repairs 3 pole power contactor ML-4, TP 70 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 2, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 4, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 6, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 2, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 4, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 6, fixed in existing starter complete all as specified and as directed.

S&F in repairs, Thermal Overload Relay TYPE -ML 2/3, fixed in existing starter complete all as specified and as directed.

S&F in repairs, ON load change over switch in sheet metal enclosures, 3 phase, 4 pole, 400 Amps capacity, 415 Volts including necessary accessories all as specified and as directed.

Dismantling and taking out unserviceable electric submersible pump set 15HP capacity from borewell and transportation to and from workshop, for repairing and servicing by replacing unserviceable parts such as impeller, bushing , thrust bearing waterseal / coupling etc including re-installing and testing with proper alignment complete all as specified and directed. Note : SS coupling/ adapter shall be measured and paid separately as "Supply and fix"

S&F SS Coupling to connect DE and NDE ends of motor and pumps with locking pins suitable for 15 HP all as specified and as directed.

S&F SS Coupling / adapter, suitable to connect HDPE pipe to pump outlet with MS clips all as specified and as directed.

Dismantling and taking out unserviceable electric sumersible pump set 2 to 5 HP capacity from borewell and transportation to and from workshop, for repairing and servicing by replacing unserviceable parts such as impeller, bushing , thrust bearing, waterseal / coupling inclu lathe work etc and re-installing and testing with proper alignment complete all as specified and directed.

S&F in repairs, PTFE Teflon Graphite gland packing rope of size 10mm/12mm/14mm all as specified and as directed.

Supply only bearing grease HP/BP superior quality all as specified and as directed.

Supply & filling, engine oil 20 W/ 40 turbo synthetic superior quality including taking out old oil all as specified and as directed.

Cleaning of area around OH tanks, UG sumps, water supply installations by removing of the existing vegetation (i.e. Small trees/ bushes/ plants/ grass, etc) and removing the same from premises all as specified and as directed.

M&L for chamber cover, fabricated out of angle iron of size 40mm x 40mm x 6 mm in framework embedded in PCC coping, 3mm thick MS sheet cover with flat iron 40mm x 6mm all around and diagonally and hinged to the angle iron frame work with locking arragement and handle, duly painted with two coats of anticorrosive bituminous paint over a coat of anticorrosive bituminous primer complete including taking down existing chamber cover all as specified and as directed.

M&L for dewatering the UG sump of 5,00,000 gallons capacity, cleaning with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of 50 mm height and 40 mm width complete all as specified and as directed. Location : MIC & S pump house.

All as per serial item No 71 but Semi UG Sump of 3,00,000 gallons capacity. Location : MIC & S Pump House near gate No. 3A

All as per serial item No 71 but Semi UG Sump of 1,00,000 gallons capacity. Location : MIC & S Pump House near gate No. 3A

All as per serial item No 71 but Semi UG Sump of 20,000 gallons capacity. Location : MIC & S Pump House near gate No. 3A

All as per serial item No 71 but Semi UG Sump of 27,500 gallons capacity. Location : MIC & S Pump House near gate No. 3A

Dewatering, cleaning of OH reservoirs' 200000 Gallons (RCC), 60' staging, inside MIC&S complex near Gate No.3 with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , Sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder / Liquid Chlorine, wash with fresh water, drying up, applying one coat of anti-fungal Cement Paint on internal surface incl marking / writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of height 50 mm height and 40 mm width complete all as specified & as directed.

All as per serial item No 76 but for 100000 Gallons (RCC), 60' staging, inside MIC&S PH at Golf Ground near JCO's MD Accns

All as per serial item No 76 but for 27500 Gallons (RCC), 60' staging, inside MIC&S PH at MAP Phase-I near OR's MD Accns

All as per serial item No 76 but for 50000 Gallons (RCC), 60' staging, inside MIC&S PH complex near Gate No. 3A at MIC&S

All as per serial item No 76 but for 50000 Gallons (RCC), 45' staging, near Basantar Block at MIC&S

All as per serial item No 76 but for 22000 Gallons (RCC), 60' staging, inside MAP PH II complex at MIC&S

M&L for PVC netlon jallies with wooden battens of sectional area n exc 13 Sqcm, wooden beads n exc 75 mm girth duly fixed with nails, and fitted on top entry of over head reservoir and fixed to windows to prevent entry of birds/dirt particles all as specified and as directed.

M&L for taking down carefully, existing unservicable water level Indicator from OH tank/ UG sump and repair the same by replacement of steel wire 4mm dia (8 SWG), MS V shaped pully 3 Nos, PVC Float 01 Nos, MS indicator, scraping, cleaning and painting steel surfaces complete, marking levels with night glow radium paint and fixing in position and testing for proper function complete all as specified and as directed.

M&L for preparation of surfaces of old MS/ CI/ DI pipes and pumps and applying one coat of synthetic enamel paint all as specified and as directed.

Supply only calcium hypo chlorite, dry free flowing and free from lumps of following generic specification : (a) Chlorine - Min 65 % (b) Particle size (passing through 1.70 mm IS sieve) - min 99.5 % (c) water insoluble matter - max 6% (d) calcium hydroxide - max 4% (e) Sodium chloride - 15% complete all as specifed and diected . Make : Any make approved by E-in-Cs Branch .

M&L for construction of valve pit/chamber of Internal dimensions 1200 mm x 1200 mm x 1200 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.

All as per serial item No 86 here-in-before but internal dimensions 900 mm x 900 mm x 900 mm

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Taking up or down 15mm bore dia steel water tubing and connections etc complete all as specified and as directed.

All as per serial item No 91 but 20mm bore dia.

All as per serial item No 91 but 25mm bore dia.

All as per serial item No 91 but 40mm bore dia.

All as per serial item No 91 but 50mm bore dia.

All as per serial item No 91 but 80 mm bore dia.

All as per serial item No 91 but 100 mm bore dia.

M&L for 15mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed.

All as per serial item No 98 here-in-before but for 20mm bore.

All as per serial item No 98 here-in-before but for 25mm bore.

All as per serial item No 98 here-in-before but for 40mm bore.

All as per serial item No 98 here-in-before but for 50mm bore.

All as per serial item No 98 here-in-before but for 80mm bore.

All as per serial item No 98 here-in-before but for 100mm bore.

M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 15mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed.

All as per serial item No 105 here-in-before but for 20mm bore.

All as per serial item No 105 here-in-before but for 25mm bore.

All as per serial item No 105 here-in-before but for 40mm bore.

All as per serial item No 105 here-in-before but for 50mm bore.

S&F in repairs, GI union ISI marked suitable for the 40/50 mm dia bore of GI pipe , complete all as specified and directed .

All as per serial item No 110 but for 25 mm dia bore

All as per serial item No 110 but for 20 mm dia bore

All as per serial item No 110 but for 15 mm dia bore

M&L UPVC Pipe 15 mm bore of pressure rating 10 kgf/cm2 laid in trenches including jointing with jointing material/solvent and testing including taking out existing UPVC pipe complete all as specified and directed.

All as per serial item No. 114 but 20 mm bore pipe.

All as per serial item No. 114 but 25 mm bore pipe.

All as per serial item No. 114 but 50 mm bore pipe.

M&L for high density polyethylene pipes of pressure rating PN 10 ,100 mm bore with fusion laid in trenches including jointing and testing including taking out existing high density polyethylene pipe complete all as specified and as directed.

M&L for UPVC ball valve, suitable for 50 mm bore including taking down old unserviceable valve of any type / make complete all as specified and as directed.

M&L for taking out carefully submersible pump 2 HP to 5 HP from borewell along with HDPE Pipe, cable , clamps and dismantling opening and servicing by replacing unserviceable parts such as impeller, bushing , thrust bearing waterseal / coupling, etc assembling , installing and testing all as directed by Engineer- in- Charge Note : Thrust bearing, SS coupling/adopter shall be measured and paid separately as "Supply Only"

Supply only thrust bearing suitable for 2 HP To 5 Hp including lathe machine work all as specified and as directed.

Supply only, SS Coupling to connect DE and NDE ends of motor and pumps with locking pins suitable for 2 to 5 HP all as specified and as directed.

Supply only, SS Coupling / adopter, suitable to connect HDPE pipe to pump outlet with MS clips all as specified and as directed.

M&L in repairs,for copper flexible submersible cable, flat, 3 core, 1100 volts grade, PVC Insulated, 2.5 Sq mm including water proof joint all as specified and as directed.

M&L for Dismantling and taking out unserviceable electric sumersible pump set 2 to 5HP capacity from borewell and transportation to and from workshop, for repairing and rewinding with existing size copper wire, winding with insulating material and warnishing heating etc and reassembly installing on existing foundation including proper alignment and testing complete all as specified and as directed.

Disconnecting electric supply from old unserviceable induction motor & pump of capacity upto 5 HP, taking out and transportaion to workshop and refixing the same after repair/replacement of worn out parts such as motor and pump bearings, fan blade & rewinding the motor with suitable gauge of super enamelled copper wire of 'F' class insulation , warnishing, heating & reassembling & servicing of pumps, refixing with motor & testing reassembled motor & pump for satisfactory completion & testing at site complete all as specified and as directed.

S&F in repairs, DOL starter suitable for 2 to 5 HP submersible pump set /motor having relay range 6 -10 Amp in steel sheet enclosure, water proof, single phase , 440 volts, 50Hz all as specified and directed. Make L& T

M & L for sluice valve of size 150 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI marked alongwith nuts, bolts, washers, gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.

M & L for sluice valve of size 200 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI marked alongwith nuts, bolts, washers, gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.

Supply, laying, jointing and testing in replacement ductile iron pipes of 100 mm bore with spigot and socket ends, centrifugally cast, class -K 7, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge. Notes :- 1) Tyton joints required are deemed to be included in the unit rate quoted. 2) The contractor shall execute the work without disturbing the existing pipe line. Old U/S pipe line shall be removed by the contractor after successful execution of work. 3) Due care shall be taken by the contractor to avoid disruption of existing electric / water / tele communication lines. Please note that any damaged caused shall be made good by the contractor at his own cost.

S&F in replacement for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable upto 150 mm bore pipe complete all as specified and as directed.

Material & Labour for General servicing of Split type Air Conditioner 1.5- 2.0 TR capacity incl clean internal parts, clean external cover with suitable liquid/ solvent, clean filter/ washing with water at same location, replace the unserviceable parts if any commissioning complete all as directed.

Supply& Fix in repair Running capacitor 36 MFD suitable for Window/Split type AC all as specified.

All as per item No 133 here in above but 10 MFD.

All as per item No 133 here in above but 4 MFD.

S&F in replacement of Hermetically sealed compressor unit suitable for Window / split type ACs of 1.5 Ton capacity in exchange of the existing unserviceable sealed compressor unit including connecting up complete all as specified & directed. (Existing Make:- Voltas/ Carrier/ Blue star/ Kirloskar/ Tuchmesh/ Usha/ Godrej/ Whirlpool/ LG/ Kenstar) (i) Connection to suction/discharge pipe with necessary repair and brazing. (ii) Replacing the capillary tubes of existing size and copper liquid filter. (iii) Flushing of entire system before gas charging. (iv) Gas charging and testing after complete repairs including installation of the machine at site and testing on full load for its smooth functioning complete.

All as per item No 136 here in above but 2.0 TR

All as per item No 136 here in above but suitable for Refrigerator of capacity 16136 to180 Ltr.

All as per item No 136 here in above but suitable for water cooler of capacity 40/40, 40/80 Litres

All as per item No 136 here in above but suitable for Water Cooler of capacity 60/120

All as per item No 136 here in above but suitable for Water Cooler of capacity 120/150

S&F in repairs Copper tube 1/2" including nitrile rubber insulation for suction refrigerant line suitable for split type AC 1.5 TR complete all as specified and directed.

All as per item No 142 here in above but 5/8" suitable for split AC 2.0 TR.

M&L in repairs, cutting, removing of burnt winding of fan motor/condenser fan motor of split type AC of any make and rewinding with super enameled copper winding wire of existing size and weight including replacement of bushing for existing make and model of AC, window type, capacity 1.5-2.0 TR all as specified and as directed.

S&F in repairs Prime Control Remote Board and temperature digital display sensor suitable for non inventer type 1.5-2 TR Split AC/Window AC of existing capacity, make or model all as per site requirement complete all as directed. Note: (i) The contractor shall ensure 10% of all PCB models in stock to rectify the complaints on emergency basis.

Material & Labour for Leak testing of split type Air Conditioner of capacity 1.5-2.0 TR including filling of nitrogen gas for pressure testing, finding leaks, Vacuuming the system, necessary brazing work, charging with refrigerant gas (R-22) of required quantity, testing for proper functioning all as specified and directed.

Supply and charging Refrigerant Gas-R-22 and testing complete all as specified and as directed.

Supply and charging Refrigerant Gas R- 32 and testing complete all as specified and as directed.

S&F in repair Fan motor 1/5 HP 240v suitable for outdoor unit of split type AC of any capacity, make or model all as specified,and as directed.

S&F in repair Fan motor 1/5 HP 240v with leaf suitable for water cooler all as specified and as directed.

S&F in repairs, relay as per existing make and model of split type AC of capacity 1.5/2.0 TR, single phase, 240 Volts, AC supply including connecting and testing of relay all as specified and as directed.

All as per item No 151 here in above but suitable for Water cooler 40/40 & 40/80 ltr capacity.

All as per item No 151 here in above but suitable for Water cooler 60/1151 & 150/150 ltr capacity.

All as per item No 151 here in above but suitable for refrigerator/deep freezer upto 3151 ltr capacity.

S&F in repairs, over load protector for existing make and model of split type AC of capacity 1.5/2.0/3.0 TR,all as specified and as directed.

All as per item No 155 here in above but suitable for Water cooler 40/40 & 40/80 ltr capacity.

All as per item No 155 here in above but suitable for Water cooler 60/120 & 150/150 ltr capacity.

S&F in repairs, thermostat suitable for water cooler of 40/80 litre capacity as per existing make & model all as specified and as directed.

All as per item No 158 here in above but suitable for Water cooler 60/120 & 150/150 ltr capacity.

M&L in repairs, rewinding of fan motor suitable for water cooler of 60/120 & 150/150 litre capacity of any make with super enameled copper wire of existing size and weight as required including replacement of bushing and capacitor of 4.0 mfd complete all as specified and as directed.

Dusting using blower and cleaning the housing from inside/out side, cooling system, cooling coil, condenser, capillary tube complete washing with CTC liquid and leak detection, testing for water cooler of 40/80, 60/120 & 150/150 litre capacity all as specified and as directed.

Taking down PVC/MS desert cooler of any size and make from bracket/ stand, spanning all three side shutters and taking out old wooden chips pad, cleaning outer and inner surface by rubbing with sand paper or wire brush, including water tank complete and replacement of cooling pad of set of three of any size, superior quality with chicken wire mesh, oiling/greasing to motor and pump including re-fixing properly at the same place as required at site.

M&L in repairs/replacement of water circulating submersible pump with motor 1/20 HP, 230 volts AC, ISI marked including electric connection for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, PVC insulated, sheathed, flexible, round, 3 core cable with copper conductor of size 1.0 sqmm, upto 2m length with 3 pin top all as specified and as directed.

S&F in repairs, plug top, 3 pin, 6 amp, 230V AC, ISI marked all as specified and as directed.

S&F in repairs, Socket outlet 3 pin, 6A, flush type, 230 V complete all as specified and as directed.

S&F in repairs, 3 speed regulator switch for desert cooler complete all as specified and as directed.

M&L for repair to body (viz. sides, base, bottom of tank) of water cooler of any make/size by replacing rusted worn out portion with suitable plain mild steel sheet of existing gauge to match original, mild steel angle iron suitable to match the existing body including transportation from MES store yard to repair shop and back complete all as specified and as directed.

S&F in repairs, freezer chest with cooling coil suitable for refrigerator 165 to 290 litre capacity as per existing make & model and fixing, connecting and testing complete all as specified and as directed.

S&F in repairs, capillary tube and drier filter, suitable for refrigerator of 165 to 320 ltr capacity with brazing, nitrogen flushing, leak testing and gas charging all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid separately under respective item.

All as per serial item No 170 but for water cooler 60/120 & 150/150 Ltr cooling capacity.

S&F in repairs, PVC flexible drain pipe length, with proper fixing clip as per existing type & size suitable for water cooler any capacity all as specified and as directed.

S&F in repairs, PTMT float valve assembly of 15 mm bore with plastic ball with suitable connections galvanized iron nipple 3” long and suitable GI sheet for fixing float valve suitable for water cooler of any make all as specified and as directed.

S&F in repairs/replacement of PVC air filter, 20 micron for existing make and model of AC any capacity 1.5/2.0/3.0TR all as specified and as directed.

S&F in repairs/replacement of shut off valve brass with flair nut complete for existing make and model of AC any capacity 1.5/2.0/3.0 TR all as specified and as directed.

Supply and replace factory made MS bracket or Stand duly painted suitable for outdoor unit of split AC including necessary PCC work, making surface matching with existing etc, all as specified.

S&F in repairs, nylon pipe, cotton breaded, size 15mm dia, suitable for drain of split type AC, capacity 1.5/2.0/3.0 TR all as specified and as directed.

Material & Labour for spray painting single coat anti corrosive enamel paint to cover of window AC of any capacity complete all as specified and directed.

Material & Labour for spray painting single coat anti corrosive enamel paint to outer unit of split AC 1.5/2.0/3.0 TR capacity complete all as specified and directed.

S&F in repairs 3 Core multistranded Copper Conductor PVC insulated sheathed flexible cable of size 2.5 Sqmm complete all as specified and as directed

S&F in repairs, sheet metal enclosure, single pole & neutral with two pin & earth plug and socket with one MCB, single pole, 20 amp, 240 volts complete all as specified and as directed.

S&F in repairs, switch socket combination multipurpose flush type 5 in 1 type, 6/16 Amps, 230V, AC. Make - Plaza / Havells / Leader /Vinay.

Supply and replace non inventor indoor type of 1.5/2.0 TR of any make by dismantling the old indoor unit and connecting up with existing outdoor unit inclusing copper pipe and brazing as per site requirement and as directed.

Material & Labour for sub main wiring on wall /ceiling with 2 runs of 4 Sqmm single core PVC insulated un sheathed multi stranded copper cunductor FR cable 1100 Volt grade drawn through and including PVC conduit pipe of medium grade not less than 20mm dia including PVC conduit specials and 1 run of 4 Sqmm cable single core 1100 Volt grade multi stranded copper conductor FR cable as earth continuity conductor and connecting with suitable size thimble including taking down of old one complete all as specifed and as directed Note: Two runs of sub main wire, One run of earth wire and PVC conduit with accessories shall be measured as One unit.

Opening of voltage stabilizer of AC, single phase, 230V of 1/2/3/4/5 KVA capacity & make and detection of fault and repair to voltage stabilizer by rewinding the main stabilizing unit and replacement of defective parts like volt meter, auto cut relay, time delay relay PCB cards, LED, Switch Socket etc as per existing make and model as required at site. Notes : Parts rate include in this job.

S&F in repairs, transformer suitable for 1/2/3/4/5 KVA voltage stabilizer as per existing make & type complete all as specified and as directed.

Material and labour for attending day to day complaints pertains to various capacity of cooling appliances as and when required by Refrigerator Mechanic and helper with necessary tools and plants for checking the equipment at existing location, find out the faults to the equipments, complete and rectification of minor problems (compressor control panel resetting with electrical components like replacement of lugs/pin, MCB resetting, electrical wiring connections to make the AC functional in all respect all as directed by the Engineer -In Charge. Notes: 1.Complaints/service schedule list shall be collected from concerned JE/Engineer-In Charge and report back on daily basis. 2..A penalty of Rs. 250/- per day will be levied in case breakdown of equipment more than 24 hours from the time of complaint registration due to non attending. 3.The Item shall be measured and paid only when no replacement of spares included in the repair work. If any spare replacement included in the work, the work shall be measured and paid under relavent item only.