SPECIAL REPAIR TO BLDG NO. TEW-26

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness ( below or above ground level) etc complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position fixed with screws complete all as specified and directed.

Dismantling of ceiling board/wall panelling (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.

Dismantling of frame work of timber scantling 40 Sqcm and over in section in any position complete all as specified and directed.

Dismantling of timber scantlings fillets, rails, posts, rafters,purlins etc. under 40 sq. cm in section, complete all as specified and directed)

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.0 sqm for each (applicable for any type of wood work) complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.50 Sqm for each (applicable for any type of wood work) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness incl nainital or similar pattern roof covering complete all as specified and directed.

M & L PCC 1:2:4 type B-1 (Using 20mm graded stone agg) 40 mm thick in flooring finished even & smooth with using extra cement complete all as specifed and directed.

M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75mm thick in plinth protection complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (Using 12.50mm graded stone agg) 25 mm thick in flooring finished even & smooth without using extra cement complete all as specifed and directed.

M & L for Non Skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

M & L for Second class hard-wood wrought timber framed and fixed in scantlings complete all as specified and directed

M & L for second class hard-wood in plain fillets, square, rectangular or triangular section clean swan, secured with nails or brads section area exc 13 Sq.cm and not exc 25 Sq.cm complete all as specified and as directed.

M & L for 6 mm plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

M & L for Solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S &F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed

S & F for Plates (plain or chequered) channels, of Fe 410 -W (Gde-E- 250) quality A square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed.

S & F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F for Pressed steel frames 105mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M & L 30 mm thick flush shutter solid core construction with particle board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F for powder coated aluminium frame for door, window, ventillators, partition wall, shutters etc etc including style & rails with standard anodized aluminium section with one or more rebates, including aluminium snap beading complete all as specified and directed.

S & F for powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

S & F for brass 02 lever mortice lock vertical type, size 100 mm complete all as specified and directed.

S & F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed.

S & F for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed

S & F for 4 mm thick tinted sheet glass,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M & L for everest designer false suspended false ceiling using GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm & wall angle 24mmx24mm. Using 4mm thick (High pressuresteam cured), pre-painted self embossed, reinforced designer cement board, conforming to IS 14862:2000, to be placed in a grid of G.I. system duly suspended with 4mm dia G.I./M.S. bar hanger fixed with steel dash fastner or iron purlins from the roof witrh adjustment clip providing position for light fixture etc all as specified and directed.

M & L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L for preparation of Old steel surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint complete all as specified and as directed.

M & L for painting on new steel surfaces of any description exc 10cm width or girth applying two coat of 1st quality synthetic enamel paint complete all as specified and as directed.

S & F for Wooden flooring with wooden laminated tiles of 12 mm thick of 2nd class soft wood designer prelaminated one side & edges tongued and grooved or rebated, and fixed with nails, necessary foam sheet complete all as specified and directed. (Make-DULEX/OMMAX/OMICLAD)

S & F for floor door stopper of aluminium alloy body and tongue, anodised, of 150 mm with rubber shoe and fixed in floor all as specified and directed.

M/S CHAUHAN ELECTRIC WORKS

TRIVENI ENTERPRISES

SIDHARTH CONSTRUCTION

Achal Sales

MS NANDAN SINGH FARSWAN