CA NO CWE/AF AMB/AMB-57/2019-20 SPECIAL REPAIR TO CERTAIN OMQs AT RACE COURSE AREA AT AF STATION AMBALA UNDER GE AF AMBALA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of plain cement concrete,un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Dismantling barbed wire/ chain link fencing of any description or in any position including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work,msonry, etc. any section, including taking out embedded portion and making good disturbed ground including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Demolition of RCC as in floors other than ground floor, of any description including cutting of reinforcement to facilitate demolition and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Demolition of breaking up drain/ water pipes of AC/RCC/PVC of 100/75mm bore including all fittings etc complete all as specified and as directed.

Dismantling of RCC/PVC water tanks of any description exc 250 ltrs and not exceeding 1000 ltrs and removing from site including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Dismantling of brick tiles or concrete tiles single layers on roof and rubbish off the premises to a distance not exceeding 500 mtr including stacking of servicable brick tiles complete all as specified and as directed.

Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Taking down chowkhats or frames exc 1.5 but n.exc 4 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed

Cutting of bushes/plants of any size grown on building , filling of holes with cement mortar 1:3 after cleaning including burning the roots of plants by chemical, removal of debries from site to distance exc 500 mtr complete all as specified and as directed

Excavation in post holes (or similar holes) each n.exc 0.5cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick in soft/loose soil and making good surface complete all as specified.

Formwork to chullah hoods, chajjas,troughs and similar items including edges on rough finished flat surfaces complete all as specified and directed.

Material and labour for rough cast plaster with and including 15 mm thick rendering in cement mortar 1:3 on brick wall or concrete surfaces as apecified in clause 14.22 of SSR part-I complete all as specified and as directed. Notes :- (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.

Material and labour for Anti termite treating the soil along external perimetre of building below ground level or masonry apron at the rate of 2.25 litre of emulsion per metre of surface area complete all as specified and as directed.

Material and labour for Anti termite treating the soil under existing floor using emulsion at the rate of one litre of emulsion per hole, 300 mm apart including drilling and plugging 12 mm dia hole with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and as directed.

Material and labour for Anti termite treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same®complete all as specified and as directed.

Material and labour for hard core of broken stone or boulders of gauge n.exc 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed..

Material and labour for PCC 1:3:6, type C-1 using 20mm graded mechanically crushed stone aggregates as in blocks to hold fast including necessary form work complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates as in sub base of floors complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B1 using 20 mm graded mechanically crushed stone aggregates as in floor finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregates using water proofing compound as in roof kerbs or mud stops or in sunken portion, rounded,chamfered on edges and similar work , in any position finished the surfaces even and smooth without using extra cement with and including necessary form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregates as in roof kerbs or mud stops, rounded,chamfered on edges and similar work,in any position complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregates as in padding on roof to maintain the required slope & finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in lintel, shelves,coping , balcony and similar works including necessary form work complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for loose filling with aggregates of broken bricks of gauge 40 mm to 80 mm as in sunken portion complete all as specified and as directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on roofs, jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Brick tiles laid on roofs using old tiles retrieved from srl No. 10 here-in-before after cleaning and washing , jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic ceramic tiles,of any tint,1st quality, 10 mm thick ,square/ rectangular, area of each tile exceeding 0.11 but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic vetrified tiles,nano series,of any tint,1st quality, 10 mm thick ,square/ rectangular, area of each tile not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour for jointfree glazed designer ceramic coloured tiles of size 300x450x7-8 mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on brick / concrete walls complete all as specified and as directed. Notes for item No 39 to 41 :- (i) The rates includes for all straight cutting and waste including raking or circular cutting complete. (ii) All corners in wall tiling should be properly metred jointed to give monolithic uniform apprearance. (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed. (iv) If tiles of different sizes are used then no price adusjtment shall be made.

Material and labour 18-20 mm thick pre-polished granite stone slab of approved shade and colour as in kitchen slab/platform, steps, cills etc including vertical projection, rounding or chamferring the edge laid over and including screed bed 20mm thick in CM 1:6 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.

Material and labour 60mm thick PCC M-40 rubber moulded double glossy interlocking designer paver blocks with crushing strength not less than 250 Kg per Sqcm over and including 25mm thick sand cushioning complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

Material and labour for rendering 10 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces in sunken portion complete all as specified and as directed. Note : WPC shall be measured and paid separately as supply only.

Material and labour for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc and on ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Supply and fixing Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and as directed.

Supply and fixing second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/guage etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and as directed.

Supply and fixing 32mm thick flush shutter, factory made, solid core construction with block board and plywood face panel commercial type on both side complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification vide clause 8.34.2 of MES SSR Part I 2009 and Preambles 8B.2 of MES SSR Part II 2010, complete all as specified and as directed.

Supply and fixing 12mm thick bakelite board of any tint/design/pattern fixed with approved adhesive as in cup board, sheves etc complete all as specified and as directed.

Supply and fixing machine crafted box type cabinet for kitchen using 19mm thick PVC sheet with Single Side Prelaminated and other side plain coloured sheet with and including all necessary fittings and fixtures to install the wire basket, shutters shall be fixed by using full overlay MS clip on hinges high quality nickel plated , satin finish size 101mm-150mm, 02 Nos per leaf complete all as specified and as directed. Note:- (i) Wire basket shall be measured and paid separetely. (ii) Front area of box shall be considered for payment purposes. (iii) Depth of box shall be equal to the width of cooking platform.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Supply and fixing 3mm thick figured/pin headed glass, ordinary quality glazing as in square not exc 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing butt hinges, stainless steel 100 mm size, heavy duty welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed.

Supply and fixing butt hinges, stainless steel 75 mm size, heavy duty welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed.

Supply and fixing stainless steel handle, 150mm long, complete all as specified and as directed

Supply and fixing aluminium handle, cast type anodised 150mm long, complete all as specified and as directed

Supply and fixing 200 mm long stainless steel, barrel tower bolt flat pattern,of extruded section complete all as specified and as directed.

Supply and fixing 150 mm long Aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing 300 mm long Mild steel ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.

Supply and fixing stainless steel aldrop combi of satin and glossy of size 250mm complete all as specified and as directed.

Supply and fixing fancy type MS curtain rod 20 mm bore ,coloured powder coated of approved shade with and including MS powder coated bracket knobs (two nos for each cut length), funnel on ends (two nos for each cut length) and suitable PVC rings of 1st quality after taking down/out rod as existing at site complete all as specified and as directed.

Supply and fixing mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410E, Gde E-250 complete all as specified and as directed. Note :- Flat iron for hold fasts shall be measured & paid separetely.

Material and labour for MS work as in posts and struts in fencing, embedding in concrete and securing bolts cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting etc and similar work conforming to Fe-290 Gde E-165 complete all as directed.

Supply and fixing for mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc including all necessary drilling, bolting or riverting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing Mild steel screw bolts 11 to 15 mm neck dia, machine made with hexagonal or square head at one end & screwed the other, to be fitted with washer & one hexagonal or square nut exc 5 cm but not exc 10cm long complete all as specified and as directed.

Supply only MS galvanised chain link fencing any size or type complete all as specified and directed. Note:- Weight OF chain link fencing shall be ascertained through BOO, to be detailed by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc with and including binding wire complete all as specified and directed.

S&F anodized aluminium single window (Bombay sliding window) made out of hollow extruded aluminium sections as mentioned below and glazed with tinted glass 4 mm thick fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150mm long complete all as specified and as directed with the followings size :- Shutter top & bottom size : 101.6x44.45x1.50 mm thick Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 Chowkat Bottom size : 50.30x26x1.00mm Chowkat top & sides size : 50.30x15x1.00mm Note:- The cost of fittings and fixtures,particle board, door spring, glass and beading etc are deemed to be included in quoted rates.

Supply and fixing anodized powder coated aluminium door made out hollow extruded aluminium sections ,each door having 02 Nos disk/D type handles 200mm long, 02 Nos aluminium tower bolt 200mm size, 1 no mortice lock 100 mm size of six levers with key in duplicate, shutter to be partly glazed with and including 5mm thick tinned glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete all as specified and as directed. (a) Chowakat frame : 101.6 x44.45 x1.50 mm thick (b) Shutter verticle style : 83.5 x44.45 x1.50 mm thick (c) Shutter lock rail : 83.5 x44.45 x1.50 mm thick (d) Shutter Top rail : 83.5 x44.45 x1.50 mm thick (e) Shutter bottom rail : 83.5 x44.45 x1.50 mm thick Note:- The cost of fittings and fixtures,particle board, glass and beading etc are deemed to be included in quoted rates.

Supply and fixing factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 , dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately as S&F and guard bars shall be measured and paid separately as Supply only. (iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

Supply only of MS work as in framed guard bar welded to window frame conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for Mild steel TMT bars ,Fe 500 D, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for Mild steel TMT bars ,Fe 500 D, 5mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and as directed.

Supply and fixing galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and as directed.

Refixing old steel tubing and connections retrieved from srl No 13 above including cleaning at new or old location with new GI fittings, bore of tubing 15mm bore with and including cutting chasing whereever required complete all as specified and as directed.

Refixing old steel tubing and connections retrieved from srl No 14 above including cleaning at new or old location with new GI fittings, bore of tubing 20mm bore with and including cutting chasing whereever required complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and as directed.

Supply and fixing vitreous china wash down water closet (Pedestal pattern) ,white, including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and aluminium hinging devices and EWC jet CP with 1 mtr long PVC connection pipe after taking down WC as existing at site complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan ,Orissa pattern, 580mmx440mm, white, with and including PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe including providing lime concrete bedding and making good to floor complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern, white, valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and as directed.

Supply and fixing sink with drainage board made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 915 mmx460mm bowl size 410x330x 160mm after taking down sink as existing at site complete all as specified and as directed..

Supply and fixing sink made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 485x420 mm bowl size 410x330x160 mm after taking down sink as existing at site complete all as specified and as directed..

Supply and fixing stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheet after taking sown sink as existing at site complete all as specified and as directed.

Supply and fixing rotational moulded polythene(PVC) water storage tank,HDPE, of white colour, triple layered ,cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 ltrs and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float complete all as specified and directed.

Supply and fixing rotational moulded polythene(PVC) water storage tank,HDPE, of white colour, triple layered ,cylinderical type fixed and hoisted in position on roof, at any height, of capacity 1000 ltrs and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float complete all as specified and directed.

Supply and fixing vitreous china wash hand basin ,oval type, white, of size 550X490mm including 32mm bore PVC waste pipe and CP waste fitting, 15mm dia pillar tap fancy type of brass CP with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed and a pair of mild steel angle iron brackets of suitable size fixed in counter slab after taking down WHB as exists at site complete all as specified and as directed.

Supply and fixing in repair 15 mm dia pillar tap , fancy type, brass chromium plated with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed complete all as specified and as directed.

Supply and fixing in repair concealed 15mm dia stop valves brass chromium plated (Concealed types) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe including cutting chases required for concealing complete all as specified and as directed.

Supply and fixing in repair stop valve 20mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing in repair stop/angle valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing in repair bib taps 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing bib taps 15 mm bore, brass, chromium plated, fancy type long body with wall flange , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule after taking down tap as existing at site complete all as specified and as directed.

Supply and fixing brass valve high pressure with polythene float and flynut complete, screwed for iron pipe or brass furrule size 20 mm bore after taking down/out as existing at site complete as specified and directed.

Supply and fixing brass chromium plated 15mm bore, fancy type, hot and cold wall/basin mixture screwed down for water pipe after taking down/out as existing at site complete as specified and as directed.

Supply and fixing in repair brass Chromium plated shower rose, fancy type,suitable for 15 mm boe pipe with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.

Supply and fixing brass chromium plated towel rail 20mm dia ,fancy type, 60cm long,superior quality , between flanges fixed to wall with brass CP screws after taking down/out as existing at site complete as specified and directed.

Supply and fixing hand shower (Health faucet) with 1mtr flexible tube with wall hook bracket etc, of superior quality after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing in replacement chromium plated grating 100mm dia fixed complete all as specified.

Supplying and fixing PVC bath cabinet of size 622mmx488mm with sliding mirror after taking down cabinet/mirror as existing at site complete all as specified and as directed.

Supply and fixing 150mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed..

Supply and fixing 100mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed..

Supply and fixing wire basket made of top quality 304 grade stainless steel, Nickel chromium plated (Ni 4%) of approved design and pattern complete all as specified and as directed..

Supply and fixing in repair corner glass,fancy type 300x300mm, made of 6-7mm thick superior quality glass with brass bracket, railing and screwed complete all as specified and as directed.

Supply and fixing in repairs PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

Supply and fixing in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints , fixed to wall with suitable size FI clamps of size 25mmx3mm, complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints fixed to wall with suitable size FI clamps of size 25mmx3mm, complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Note for srl No 114 to 117 :- Excavation and earth work shall be measured and paid seperetely if pipe laid in other route/location.

Supply and fixing PVC (SWR) bends any radius, for 110mm bore of pipe with or without oval access door complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius, for 75mm bore of pipe with or without oval access door complete all as specified and as directed.

Supply and fixing PVC (SWR) ,110mm bore single T , equal or unequal , junction single fixed with solvent cement with or without oval access door complete all as specified and as directed.

Supply and fixing PVC (SWR) , 75 mm bore single T , equal or unequal , junction single fixed with solvent cement with or without oval access door complete all as specified and as directed.

Material and labour for APP polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

Material and labour for two coats of oil emulsion distemper of approved shade/tint over JK/Birla white wall care putty of any thickness to achieve smooth finish on old treated plastered surfaces of walls including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke spot, moulds, mess efflorescent salts, trading oil & greasy spots, removing nails etc complete all as specified and as directed.

Material and labour for two coats of oil emulsion distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of cement based paint of approved shade/tint over a coat of primer on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of cement based paint of approved shade/tint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of Oil bound distemper of approved shade/tint over JK/Birla white wall care putty of any thickness to achieve smooth finish on old treated plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces of walls or of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint on new steel and iron surfaces of walls or of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for One coat of synthetic enamel paint on old treated steel and iron surfaces of walls/trusses/purlins/rafters/posts etc, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of pink primer on new wood and wooden based surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation of old wood and wooden based surface and applying one coat of synthetic enamel paint, of surface over 10 cm width or girth, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc inluding taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and as directed .

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light/fan point controlled by one way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light point controlled by two way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch socket combination 6 amp on the independent board complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch socket combination 6 amp on the same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor,drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one bell point controlled by one bell push complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 15/16 amp multipurpose socket combination on independent board complete all as specified and as directed. Note for srl No. 135 to 140:- (i) Switches, switch socket outlet, switch socket combination, bell push and fan regulator shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces.

Supply and fixing switch piano, flush type 6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 6 amp, single pole, two way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing socket outlet, 2 in 1 , 5 pin, 5 amps flush type complete all as specified and as directed.

Supply and Fixing socket outlet, 2 in 1 , 5 pin, 5/15 amps flush type complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and as directed.

Supply & fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

Supply and fixing bell push single pole one way 5 Amp, 240 volt flush type complete all as specified and as directed..

Supply and Fixing call bell ding dong, 230 Volts, single phase complete all as specified and as directed.

Supply and Fixing electronic fan regulator stepped type,SP 240 volts grade 350 watts heavy duty including making necessary connections to make it functional complete all as specified and as directed.

Supply and fixing in replacement MCB, SPN, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, SP, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket with one single pole MCB 20 Amp,240 volts, 10 kA complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 4 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 8 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 12 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for TPN DB with incomer +24 module outgoing, load line with and including MCCB 100 Amps,4 pole, 16 kA, incomer double door, IP43 protection as per IS 8623-III,with 200 Amp rated bus bar,8 ways blanking plates,double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note :- Two runs of 4 sqmm cable alongwith One run of 2.5 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 10 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25 mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note:- Two runs of 10 sqmm cable alongwith one run of 6 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying, laying, jointing, testing and commissioning under ground electric cable XLPE 1100 Volts grade, heavy duty, PVC insulated screened PVC beeded GI steel strip armoued electric power cable with stranded aluminium conductor, of cross section area 50 Sqmm 3.5 core as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed. Note:- Excavation & earth work, sand cushioning, protection pipes, end termination joints & protection covers shall be measured and paid separately.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out, in soft/loose soil complete all as directed

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick each complete all as specified and as directed.

Removal of surplus soil to a distance not exc 500 mtrs & depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.

Supply and laying sub class 'B' bricks old sizes over the underground HT/LT cable, laid dry & flat abutting each other with width equal to length of bricks for protection of cable after taking down cover as exising at site complete all as specified and as directed.

Supply and fixing GI pipe 50 mm bore , light grade as in trenches, under road, fixed to wall, with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed . Note :- Excavation and earth work if required shall be measured and paid separately.

Taking down carefully electric meter from the existing place of any make/sweep, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works duly repair/ overhauling and making necessary connections complete all as specified and as directed.

Taking down carefully ceiling fan of any make/sweep, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works duly overhauling ,spray painting with one coat of white synthetic enamel paint & writing MES No with black paint and making necessary connections from ceiling rose with twin core twisted flexible copper conductor cable of suitable size to make it functional complete all as specified and as directed.

Taking down carefully water heater (geyser) from the existing place of any make/sweep, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works duly repair/ overhauling and making necessary connections complete all as specified and as directed.

Supply and fixing in replacement LED tube light fitting 1x18 watt fitting, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including LED tubelight with high efficient LED18 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement indoor decorative LED batten with opal diffuser with inbuilt LED tube 10 watts and driver designed with high transmitting optics for even light distribution IP20 degree protection having length 620mm including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement LED bulk head 10 watts with pressure die cast aluminium housing high efficient LED enlosed with milky diffuser IP66 protection with & including LED bulb 10 watts and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement LED decorative wall light fixture 15 watt made of polycarbonate suitable for retrofit LED lamp spiral B-22 base, including flexible three core cable from ceiling rose to fitting with & including LED bulb 10 watts and making necessary connection to make it functional complete all as specified and as directed. Make:- Havells Cat Part No LHDL02160099 or equivalent of makes as specified .

Supply and fixing in replacement LED retrofit lamp/bulb 12 watts complete all as specified and as directed.

Supply and fixing 60 watt LED security light fitting with not less than 100 lumen/watt delivered lumen efficacy supported with LM-79/80, cast alluminium alloy housing IP 66 protection, input voltage range 120-270 volts auto cut off at voltage exceeding 300 volts, autopower on after cutt off with time delay of less than 60 seconds, power factor more than 0.95, surge protection 5 KV internal and 10 KV external, driver current not exceeding 700 mA, driver electrical efficiency not less than 85% at constant current delivery, with secondary optic lense for every LED, with name of manufacturer / logo clearly embossed on housing of every fitting, LED CCT 5700+300 ANSI BIN, with and including GI bracket made out of 40 mm bore pipe light grade of length not less than 1.5 mtr with one bend, including taking down existing light fittings complete all as directed and specified.

Supply and fixing in replacement rigid non metallic PVC conduit 20mm dia with & including all accessories complete all as specified and directed

Supply and fixing in replacement 1100 volts, grade heavy duty PVC insulated aluminium conductor served with inner sheathed of PVC tape and overall PVC sheathed in service connection suspended by insulating hangar not more than 1 mtr apart including 4 mm dia suspension wire one twin core cable flat of size 6 sqmm. complete all as specified and as directed.

Supply and fixing in replacement House service bracket hook type made with 3 meter long G.I. pipe 40mm dia medium grade with two nos 90degree bends. M.S. clamp two Nos made of FI 25x3mm with suitable size nuts, bolts and washers complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI wire 4 mm dia upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover slab 50 mm thick 1:2:4 type B-1 using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover with CI frame all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site all as specified and as directed. Notes-- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO. (ii) On testing if the earth resistance is not obtained, earthing will be generated at NO extra cost ,till the desired earth resistance is obtained.

Deduction of Total of Sch of credit amount Rs 184919.00

M/s Mangal Construction Co.