SPL REPAIRS TO BLDG NO T-140 TOILET BLOCK AT EME UNDER GE ARMY BARODA

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each complete.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete.

S&F stainlees steel butt hinges 100mm medium weight complete.

S&F aluminium alloy handle 150 mm cast type anodised complete.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, complete.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete.

S&F in repairs structural steel work Fe-290 (Gde -165) as in roof trusses (framed), trussesd, purlins, crane gantris, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and wind tie including distance pieces, cleats etc. complete.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete.

Dismantling Asbestos Cement (Corrugated, Semi- Corrugated, etc) sheets in roof covering complete.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.

S&F in repairs 60cm long CP Brass 20mm dia tubular towel rail with flanged ends complete.

S&F in repairs C.P grating of size 150 x 150 mm complete.

S&F in repairs PVC (SWR) Floor/gully trap of size 125/110mm setting and jointing with solvent cement complete.

S&F in repairs 15 mm bore CP stop cock / Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete.

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F in repair concealed stop cock fencing type with sheet flange cast copper alloy, scrwed down high pressure with round operating knob for 15 mm bore pipe bore and fixed complete.

S&F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete

S&F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete.

S&F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete.

S&F in repairs PVC flushing cistern low level, 10 ltr capacity with syphonic action type, inlet ball valve, float and handle, PVC band 32mm complete.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) incl waste pipe complete.

S&F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete.

Taking down steel tubing and connection of size 15mm dia bore including cleaning for refixing the same in new or old position fixed on wall, trenches and ceilings complete.

Taking down steel tubing and connection of size 20mm dia bore including cleaning for refixing the same in new or old position all as directed fixed on wall, trenches and ceilings complete.

Taking down steel tubing and connection of size 25mm dia bore including cleaning for refixing the same in new or old position all as directed fixed on wall, trenches and ceilings complete.

S&F galvanised iron tubing of size 15mm dia bore (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with necessary fittings jointed with tuflon tape complete.

S&F galvanised iron tubing of size 20mm dia bore (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with necessary fittings jointed with tuflon tape complete.

S&F galvanised iron tubing of size 25mm dia bore (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with teflon tape complete.

M&L for Cutting chases for concelled pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in CM 1:6 complete.

M&L for glazed ceramic coloured wall tiles in vertical surface 300x 200/350x250/450/350mm &7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in CM 1:4 complete.

Taking down cement plaster from brick/concrete surface including scrubbing down with water etc complete.

M&L for 15 mm thick rendering in CM 1:6 on internal brick work or concrete surface on wall to be finished even and smooth without using extra cement complete.

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall external 5mm thick plaster in CM:1:4 mixed with & including WPC @ 3% by weight of cement, over 10mm thick plaster in CM 1:6 to be finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash complete.

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for complete removal of old treatment of plastered surface of wall and prepare wall surfaces and apply two coat of cement base paint over a coat of alkaline resistant primer complete.

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete.

M&L for PVC (SWR) bends without access door suitable for 110 mm Bore pipe fixed complete.

M&L for PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints & stack clamp laid in floor or trenches fixed complete

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete.

S&F in replacement rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 1000 litre capacity hoisted and fixed in position complete.

S&F in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete.

S&F in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F in repair 25 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc to be finished the surfaces even & smooth without using extra cement complete

M&L 25mm thick PCC 1:2:4 type B-1 as in flooring etc finished the surface even & smooth without using extra cement complete

M&L 100mm thick PCC 1:4:8 type D-2 as in sub base, path etc finished the surface even & smooth complete

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150mm dia pipe complete.

M&L for Salt-glazed stoneware drain pipes of 150mm dia bore, laid in trenches and jointed complete.

M&L for Concrete bed to drain pipes of 150mm dia bore including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 for 150mm dia bore pipe work in foul position complete.

S&F reinforced precast factory made cement concrete manhole cover in 1:2:4, type B1 (using 20mm graded stone aggregate) and set in CM (1:6) of size 450mm x 900mm x 50mm complete.

Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete.

M&L for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete.

M&L PCC 1:2:4, type B-1 (20 mm graded aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating including necessary form work etc. complete.

M&L reinforced cement concrete type B-1 1:2:4, (20 mm graded aggregate) nominal mix as in slab supported on wall complete.

M&L for formwork for rough finished flat surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete.

Removing excavated soil n exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete.

Taking down carefully Copper / Aluminium point wiring (light, fan, socket or power) including fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc & removing materials from site and making good disturbed surfaces of walls roofs etc complete.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in including medium grade PCV conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet6 fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete for the following :

One light point controlled by one switch 6 Amp one way

One exhaust fan point controlled by one switch 6 Amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin switch socket combination on same board with other switches.

All as described as peritem No 69.00 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

One light point controlled by two 2 way switches, with cables 1.5 sq. mm size

S&F MCB DB SPN 08 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete. Make: Legrand/Schneider/L&T

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB. Make: Legrand/Schneider/L&T (DB will be measured and paid separately under respective items of sch A) for the following :-

MCB SPN 5 to 40 Amps.

MCB SP 5 to 40 Amps

M&L switch piano flush type single pole, one way 6amp, 240V complete. Make: Anchor/SSK/CONA.

M&L switch piano flush type single pole, two way 6amp, 240V complete. Make: Anchor/SSK/CONA.

M&L switch socket combination 2 in 1, 5 pin 6 amp, 240 V, complete. Make: Anchor/SSK/CONA. or in equivalent

M&L switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type 240V complete. Make: Anchor/SSK/CONA. or in equivalent.

S&F ceiling rose 65x17mm three terminals 230/250V, ISI marked complete.

S&F lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting.Make : Anchor/Philips/ alongwith 9 watt LED lamp complete. Make: Philips/Wipro/CG

Supply, Fixing, Testing and commissioning in repairs of 4' LED 1X18W LED Batten with LED tube 18 watt. Housing of Batten should be made from Single piece powder coated CRCA sheet steel. complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete. Similar to Model No. REGALBATTEN8UPTO1X22wSSBSWH & CRYSTAL1213T8DSTL18WLED865SGLASS Make- Havells or in Make: Philips/Wipro/CG

Supply, Fixing, Testing & Commsioning in repairs of IP65 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . Power Consumption should not exceed 10W (Including Driver Loss). Operating voltage range 120V-277V AC.complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete. Similar to Model No.RUGBYNEONFT10WLED760SSYMBOPC, Make : Havells or quivalent in CG/Wipro/Philips

Supply, Fixing, Testing & Commisioning in repairs of 2' 10W Mirror LED Batten with LED tube complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete. Make- Havells, Model-ENDURALINEARNEOBS10WLED830SPCWH or equivalent in Wipro/Philips/CG

S&F in repairs wall security light 25 Watt LED type with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete. Make- Havells, Model-ENDURAPEARLSL25WLED757SASYTOPC or equivalent in Phillips/Wipro/CG.

Supply, fixing, testing & commissioning of exhaust fan 300 mm sweep, 1400rpm, 230 Volt AC supply (single phase), with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan. Make : CG/Bajaj/Havells/Orient or equivalent. Similar to Crompton Greaves model No EXHD300-4-1 Note : Old unserviceable exhaust fan shall be deposited to AGE E/M store yard.

Dagli Engineers

RAJENDRASINH B THAKOR