SPECIAL REPAIR TO HARD STANDING OF ASSEMBLY AREA, APROACH PATH AND OTHER WORKS OF KV NO.02 AT AF STATION UNDER GE AF TEZPUR

Amount

M&L for Roughening surfaces of old black top surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M&L for Coloured Machine pressed precast concrete interlocking paver block (Glossy Finish) any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade over and including 25mm thick sand cushioning and 50mm thick PCC type 1:3:6 (20mm graded aggregate) as in base course complete all as specified and as directed.

M&L for 75mm thick PCC type D-2 1:4:8 as in base course after demolition of existing PCC in approach paths complete all as specified and as directed.

M&L for PCC Type B1 1:2:4 (20mm graded Stone Aggregate) as in Chamfered edges of Hard Standing, Path, roof Kerbs and Mud stops complete all as specified and directed.

S & F in repair factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded and including preparation of newly or previously untreated wooden surfaces applying two coats of synthetic enamel paint over a coat of red oxide primer and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs (up to G+1 ) complete all as specified and as directed.

S & F Sheet glass 3 mm thick ordinary quality, glazing with oil putty/ wooden beadings having cross sectional area n exc 6 sqcm , in square n-exc. 0.5 sqm in each pane with minimum 04 nos ms glazing clips per pane complete all as specified & directed.

S & F Sheet glass 3 mm thick ordinary quality, glazing with & including oil putty/wooden beadings n exc 6sqcm cross sectional area, in square n-exc. 0.5 sqm in each pane with minimum 04 nos ms glazing clips per pane & including hacking down old one at any height in multy story bldgs (G+1) complete all as specified & directed.

Roughening/hacking out surfaces of old concrete floor/wall of Stair hall including cutting out MS work embeded in concrete if any by hacking , picking, sweeping cleaning and washing down with water to remove dust etc complete all as specified and as directed.

M&L for 20mm thick Granite work (table rubbed and polished) as in Skirting and Risers over 10mm thick Rendering in CM (1:3) and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M&L 20mm thick Granite work (table rubbed and polished with bull nose finish at edge) in steps and like over 15mm thick Screed bed in CM (1:4) laid and pointed in white cement (1:2) using marble dust with admixtue of pigment to match with shade of granite complete all as specified and directed Note for item No. 9 and 10 : (Single piece granite shall be used for steps, treads, risers and landings of stairecase)

M&L for Reinforced Cement Concrete Type B1 1:2:4 (20mm graded stone aggregate) as in Chajja in multy storey bldgs up to(G+1) , including demolition of RCC in damaged chajja and all necesarry formworks complete all as specified and as directed.

S&F Mild Steel TMT Bars 5mm dia over upto and incliuding 10mm dia in steel reinforcement in Chajja including mild steel wire not less than 0.9mm dia or securing with clips or welding to existing steel reinforcement complete all as specified and as directed.

M&L for rendering in patches n exc 3 sqm in each patch, 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces exteranally at any height ( G+1) finished even and smooth without using extra cement and applying two coats of exterior emulsion paint (weather coat ) over a coat of primer in any shade or colour as approved complete all as specified and as directed.

M&L for complete removal of existing treatment, including preparation of plastered or unplastered surfaces of wall/ceiling, concrete surfaces, AC sheet surfaces and applying two coats of exterior emulsion paint (weather coat ) over a coat of primer in any shade or colour as approved complete all as specified and directed. Note: (i) All painting works shall be done with rollers only, permission for application of Second coat will be given by Engr-in-Charge/GE after approval of first coat. (ii) Guarantee of five years must be submitted for this item and ref para 12 of PS page No. 88( R) for detail.

Evergreen Firm

KAILSON

M/S Yadav Corporation

KUNDAN ENGINEERS AND BUILDERS

M/S A K MITRA