PROVISION OF TOILTE ALONGWITH RETAINING WALL NEAR ASSEMBLY AREA, PROVN OF FENCING AND ALLIED WORK AND OTHER CERTAIN MINOR WORK AT VARIOUS PLACE UNDER AGE LEKAWADA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavating in post holes (or similar' holes) each n exc 0.5 cu. m, getting out, returning. filling in and ramning earth or broken rubble mixed with earth around, in layers not exceeding 25 cm hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation exce[t sand complete all as specified and directed

Removal of excavated soil N exc. 50m depositing where directed at level n exc. 1.5M above the starting point complete all as specified and directed..

Excavating in trenches n exc 1.5 m wide & n exc 1.5 m depth and getting out any type of soil.

M&L for Reinforced cement concrete M-30 (20 mm graded aggregate) in foundation, including raft,footing, foundation beams, plinth beams, base of columns, under reamed piles complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

-ditto- all as per item No. 9 above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections), including distance piece, cleats etc fixing complete using Fe-410-W( Gde E-250) quality-A

S&F Plates (plain or chequered) , channels, square cut or notched ( ordinary and counter sunk) forming holes, without any attachment etc complete using Fe-410-W( Gde E-250) quality-A

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including 10mm dia MS round bars as in tie bars fixed to fencing posts including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc. 10 cm long with 5 to 10mm dia of neck

M&L for Preparation of new steel surface of any discription exc 10 cm width or girth one coat of red oxide and two coat of synthetic enamal paint

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-charge

M&L for broken stone or boulders Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L for 100 mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floors all as specified

M&L for 25 mm thick cement concrete (1:2:4), type B-1, using 20mm graded mechanically crushed stone aggregate as in flooring complete all as specified and as directed.

M&L for75 mm thick Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/disintegrated rock.

Supply only water proofing compound (integral) all as specified & directed.

M&L 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

S&F vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge.

S & F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & connection to CI 'P' trap, 100mm, complete all as specified

S&F in repairs 10 ltr capacity PVC Valve less , syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and fitted to flush pipe complete all as specified

S&F vitreous chine wash hand basin flat back size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand including waste CP coupling of PTMT and PVC waste pipe of 32 mm dia.

S&F Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe)

M&L angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia

M&L bib taps cast copper alloy fancy type chromium plated scresed down screwed for iron pipes 15 mm dia.

S&F Pillar taps cast copper alloy with capstan heads, chromium plated fancy type scresed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes 15 mm dia all as directed by Engr-in-Charge.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs

S&F 15 mm dia 450 mm long PVC water connection with PTMT nuts and washers all as directed by Engr-in-Charge.

Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe and fixed in repair.

S&F PVC (SWR) floor trap with grating incl jointing to waste pipe with dia of outlet 75mm

Supplying and laying of CPVC pipes of size 25 mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors. complete all as specified and as directed.

All as per above but 20 mm outer dia

M&L for preparation of new plastered or unplastered surfaces and applying two coats of oil bound distemper on wall over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

M&L 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels, covered with decorative face veneer with lipping/frame on both sides complete all as specified and as directed by Engineer-in-Charge.

S&F powder coated aluminium anodised three track sliding window/Ventilator shutter and frame including jointing clit for fixing frame/chowkhat of window as per JINDAL section code (frame 20831), shutter (20846) including glazing with 5mm thick tinted glass & Aluminium wire mesh necessary fittings, rubber packing, suitable handles, rollers for shutters etc complete all as specified and as directed.

M&Lfor Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I.flat 40 x 3 mm size , expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger complete all as specified and directed by Engr-in-charge

M&L for 12mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600 mm grid complete all as specified and directed by Engr-in-charge

M&L Solid laminated PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed by Engineer-in-Charge.

Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

S&F 200mm long Aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F 100 mm long Stainless steel Butt hinges complete all as specified and as directed

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall/ bore of the pipe 110 mm.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floor bore of the pipe 110 mm.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointed with solvent cement.

M&L PCC 1:3:6 C-2 concrete bed to 100 mm dia drain pipes including packing under, and haunching against the side of pipes after they are laid and tested.

S&F PVC (SWR) bends any radius 110 mm dia.

Supply and fixing of 75 mm thick Birla Aerocon Prefabricated Fibre Reinforced Sandwich Panels, made of two Fibre Reinforced Cement facing boards on either sides of a lightweight concrete core. These boards shall be of thickness of upto 5 mm and shall conforms to IS 14862:2000 (Type A). The core shall be made from a mix of cement and silacaceous & micaceous material. The Aerocon Prefabricated fibre reinforced sandwich panel shall have size 2400/2700/3000 mm in height and 600 mm in width. These panels shall have Tongue & Groove joint system for partitions. These panels shall have fire rating of 2 Hrs. or more, Thermal conductivity of 0.17 W/m.k or less, sound insulation of 40 db. or more and can able to take Axial load of 90 KN/m or more (tested as per ASTM E 72). Jointing of these Prefabricated fibre reinforced sandwich panels shall be done with a polymer modified Cementitious jointing compound in tongue & grove and surface joint shall be treated with Polymer modified cementitious jointing compound and fibre tape. The Aerocon Prefabricated fibre reinforced sandwich panels shall be laid on GI coated (120 GSM both side inclusive) floor & ceiling channel of 1 mm thick and sizes of these channels shall be 14x75x25 mm for floor channel and 38x75x38 mm for ceiling channel. The rates shall be inclusive of all component, fixing, wastage, all required accessories and hardware as a complete item of work as per the guidlines of HIL Limited and instructions of Engineer-in-charge.

M&L for Plain Cement concrete1:4:8 (type D-2) ( using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified

M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; slant beams; bases for columns, etc complete all as specified

M&L for RCC M-30 Walls, Retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on flat surfaces complete all as specified

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M&L for Mild steel bars 5mm dia and upto 10 mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for in stirrups, spacers and binders complete all as specified

S&F in 75 mm bore PVC (SWR) pipes as in wheep holes complete all as specified

M&L for using Graded coarse aggregate 20 mm as in invert filter complete all as specified

M&L for using Graded coarse aggregate 63- 40 mm as in invert filter complete all as specified

M&L for sand filling as in invert filter , and back filling etc. including watering and consolidation complete all as specified

M&L for Brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified

M&L for Reinforced cement concrete pipes, class NP-2 ,600 mm bore of pipe, laid and jointed complete with collars etc complete all as specified

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L applying two coats of cement based paint over a coat of primer including preparation of new plastered surfaces of wall complete all as directed

M&L for 200-250 mm thick stone boulder pitching with dressed edge stones, laid and grouted with cement and sand mortar 1:6 on area complete all as specified .

M&L for Cement concrete type B-2 1:2:4 ( using 20 mm graded crushed stone aggregate) as in coping over walls /drains etc complete all as specified

M&L for 50 mm Cement concrete type B-1 1:2:4 ( using 20 mm graded crushed stone aggregate) as in flooring / sub base etc complete all as specified

M&L for Cement concrete type B-2, 1:2:4 ( using 20 mm graded crushed stone aggregate) as in surface channel and drains etc complete all as specified

L TYPE TABLE:- SIZE : 10'5" X 7'5" X 2'5" 18MM BWR WATERPROOF PLY 1 MM FINISH LAMINET INER LAMINET WHITE 0.8 MM ALL EDGE 2 MM PVC H BIDDING INCULDING LABOUR,FITTING & TRANSPORTATION

DISPLAY CABINET:-SIZE : 10' X 4' X 1' 18MM BWR WATERPROOF PLY 1 MM FINISH LAMINET INER LAMINET WHITE 0.8 MM ALL EDGE 2 MM PVC H BIDDING BACKSIDE 5MM IRROR GLASS INCULDING LABOUR,FITTING & TRANSPORTATION

SIDE CABINET:-SIZE : 10' X 2'5" X 1'5" 18MM BWR WATERPROOF PLY 1 MM FINISH LAMINET INER LAMINET WHITE 0.8 MM ALL EDGE 2 MM PVC H BIDDING INCULDING LABOUR,FITTING & TRANSPORTATION

GLASS HOLDER STAND :-SIZE : 12' X 1' 18MM BWR WATERPROOF PLY 1 MM FINISH LAMINET INER LAMINET WHITE 0.8 MM ALL EDGE 2 MM PVC H BIDDING INCULDING LABOUR,FITTING & TRANSPORTATION

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core

Excavation in trenches n.exc 1.5 mtrs wide and n. exc. 1.5 mtr in depth for laying of electric cables for fixing of poles and stay or for laying pipes (where provided for protection of cables) and getting out trimming the sides forming bottom surface to required level in soft/loose soil complete all as specified and as directed.

Supply, laying, jointing of Double Walled Corrugated Pipe(DWC) as UG Cable Pratection complete of Size 90/76 mm

Supply, jointing of Snap Fit Coupler for Double Walled Corrugated Pipe(DWC) as UG Cable Pratection complete of Size 90/76 mm

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (outdoor type)with Cu busbar 200Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following: Make:- BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) MCCB 4 Pole, 415 Volt 63 Amps - 2 No Make:-ABB/C&S/Legrand/Siemens

(c) MCB , 32 Amps - 2 No

(C) Digital Voltmeter 0-500 V 96x96m---01 nos.

(d) Digital Ammeter 0-500 A 96x96m---01 nos.

(e) Indicating Lamps set RYB----01 set

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (outdoor type)with Cu busbar 200 Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following: Make:- BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) Outgoing TPN MCB 4 Pole, 415 Volt 32 Amps - 03 No Make:-ABB/C&S/Legrand/Siemens

(c) Outgoing MCB socket multifuntional. Make:-ABB/C&S/Legrand/Siemens

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

Material and labour Earthing complete with Galvanised iron plate electrode 60cm×60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts and washers including necessary excavation earth wok , PCC Chamber etc all as shown in electrical plate No 3 of SSR Part-I 2009 and vonnected to earthing test piont all as specified or indicated including CI Cover, Funnel, GI watering pipe 20 mm medium grade, wire mesh and lugs etc. with GI Pipe 25 mm bore light grade for protection 7.5 Mtrs long including testing on completion all as specified and directed

M&L for Multi standard Copper Conductor cable of 1.5 Sq mm 4 Core size, drawn through HDPE/PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :- Polycab/RR Kable/Havells Note: 1. Conduit wall saddles & small excavation of cable in gardens deemed to be included in the quoted rate.

M&L for Multi standard Copper Conductor cable of 2.5 Sq mm 4 Core size, drawn through HDPE/PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :- Polycab/RR Kable/Havells Note: 1. Conduit wall saddles & small excavation of cable in gardens deemed to be included in the quoted rate.

S&F RGB/Multicolour LED 9W, IP 68, Aluminium die cast housing with purity lense for spot lightning with glare free light distrubition enhancing accent lighting, including fixing arrangements, S Connector & T Connectors etc complete all as specified and directed.

S&F Controller, Plug-socket S connector, 3-Channel Main Controller, input/output, accesories complete all as specified and directed.

S&F SMPS Driver and accesories etc complete all as specified and directed.

S&F Three phase Openwell submersible pump of 3 HP, reted voltage 440 V, 50 Hz Total head 16 m inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S&F Three phase starter submersible operation with 3 head upto 5HP.complete all as specified and directed.

Supplying and laying of CPVC pipes of size 32mm SDR 11 & Plain CPVC SDR 11 fittings in trenches completei all as specified and directd .

Supplying and laying of CPVC pipes of size 25mm SDR 11 & Plain CPVC SDR 11 fittings in trenches completei all as specified and directd

S&F S.S 304 SPOUCH (8 FEET ) completei all as specified and directd Make: JINDAL PVT.LTD

S&F S.S 304 SPOUCH (1.5 FEET ) completei all as specified and directd Make: JINDAL PVT.LTD

M & L for water distributor for fountain S.S 304 for provision of connecting fountain nozzle complete all as spd and directed.

M & L for Brass fountain nozzle complete all as spd and directed.

Supply & Fixing, Outdoor type Special Purpose Speaker, 40W RMS, PA Garden Speakers, Rugged & beautiful green garden speaker which harmoniously merges with the outdoor garden environment, and water resistant polypropylene speakers. Strong aluminium alloy housing permits various outdoor applications Front Loudspeakers and including PCC 1:2:4 type B1 (20 mm graded aggregate) suitable size for mounting of light fitting including mounting pole with accessories not less than 1.2 Mtr height for fixing with anti-rusted nut & bolts etc required as per site all as spd and directed. (Make : AHUJA Model : GS-6401T or its equivalent ) Note: 1. Apply for single coat of suitable colour distempering for bollard foundation shall deemed to be included in the quoted rate.

Supply & Fixing USB player, with built-in MP3 Player & Digital Effects Compact and reliable professional PA Mixer which is aesthetically superior and easily portable.Upto four low impedance microphones and Line level signal sources can be connected in either balanced or unbalanced configuration, through a 6.3 mm (1/4”) stereo jack socket.Each channel has a GAIN control for optimum adjustment of the MIC & LINE input sensitivities. Active BASS & TREBLE controls in each channel for desired equalisation of the input signal. Separate FX (effects) level control for each input channel. MP3 digital player with recording, playback through USB & Bluetooth facility. Stereo input channel is provided with a GAIN control, 2 band EQ, FX & LEVEL Controls.Built-in digital effects processor with DELAY, REPEAT and LEVEL controls. Line level LEFT & RIGHT outputs through 6.3 mm (1/4”) stereo jack sockets.Individual SIGNAL & CLIP LEDs for optimum setting of signal levels.all as spd and directed. (Make : AHUJA Model : FMX-106DP or its equivalent ) Note: 1. Suitable cables for installation shall deemed to be included in the quoted rate

Supply and fix General purposewired handheld and PA microphone all as spd and directed. (Make : AHUJA AUD Series or its equivalent )

M&L for Speaker cable/ of size 1.5 Sq mm 2 core, drawn through ISI Marked HDPE/PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :-Krystals/falcon/Finolex/Polycab/Plaza/Havells/ RR Kabel Note: 1. Conduit saddles & small excavation of cable in gardens deemed to be included in the quoted rate.

Supply and fix all required interconnect cables,connectors & accessories all as spd and directed.

S&F Garden spike LED 12 Watts (4000K), Compact and aesthetic polyester coated aluminium housed in ground/bushlight offers safe and vibrant parking area, pathways and gardens with high illumination, including fixing arrangements etc complete all as specified and directed. Make : Philips or its equivalent inWirpo /Bajaj/Prisha

S & F MCB DB 04 way SPN, PC (Polycarbonate), IP 65 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc.including 04 Nos MCB's SP 6 Amp to 32 Amp, complete with all accessories, main switch and connecting the cables with proper all as specified and directed by Engineer in Charge. Conforming to Cat No - KV 6104 of Hensel or Equivalent from Hager

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , Pearl White Make-Orient Pearl White or equivalent Make-CG/Khaitan/Usha

Supply, install,and commissioning of 1.5 TR Hi Wall Split Units indoor/outdoor complete with cordless remote controll unit with inbuilt air ionisor and Plazma filleter for better air quality minimum 3 star rating, invertor type of Make- Voltas/Bluestar/Carrier

M&L 7.5ft long MS decorative pole with cast iron pole base, bolts and foundation complete

Supply and fix New generation, IP 65 LED post-top Light 15 W, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications.Make-Havells, Item Description- RUBYMINIPT15WLED830PSYMTOPC

S&F LED Bollard 10 W with aluminium excruded housing with glare free opal diffuser IP-65 , worm white provides uniform illumination for pathways including suitable PCC foundation, Nut & Bolts with connection to the existing electric network complete all as specified and as directed of Make: Halonix , Cat Ref No-HL-0B-02-10-WW or equivalent Cat No of Make- Bajaj/Havells/Crompton/Polycab

Supply and fi , IP 65 LED post-top lantern 25 W, with die cast aluminium spigot , spun aluminium powder coated, top cover and clear Acrylic diffuser including connection to existing electric network completei all as specified and directd .Make-Halonix, Cat No-HLPT-03-25-CW or equivalent CatNo of Havells/Bajaj/Crompton/Polycab

Supply, install,and commissioning of Water Cooler fully stainless steel,Electric driven, single phase having approx storage capacity 40 ltrs and nominal cooling capacity 80 ltrs of Make- Voltas/Bluestar/Usha

Supply, Installing & testing for submersible pump single phase 230V, frequency 50+3%Hz, 1 HP, 24 mtr head, size 25 mm including starter and connection with the existing pipe line of Make-Lubi/CG/Kirloskar

Supply, laying, jointing & testing submersible cable PVC insulated,PVC Sheathed, multistranded, flat 1.5 Sq mm 3 core copper conductor suitable for working voltage 1100 volts including connections to motor / starter complete all as specified and directed by Engr-in-Charge.

M&L for point wiring of one light point controlled by one switch with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100V grade drawn through and incl PVC casing in capping /conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLS cable 1100V grade as earth continuity wire incl sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 8 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

S&F MCB SP 6 to 32 Amps, 'C' Series 10 KA completei all as specified and directd .

S&F MCB SPN 230 volts 32 Amps 10 KA completei all as specified and directd .

M&L for sub main wiring complete with PVC insulated cable of single core 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 2.5 Sq mm unsheathed multi stranded copper conductor as on earth wire completei all as specified and directd . Note :- Two runs of single core cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F Energy saving, environmental friendly, long life, die-cast aluminium housing IP66,70/80W LED flood light,suitable for highlighting architectural facade and general purpose lighting. Of Make-Wipro Cat Ref No-LF20-102-060-57-G3 or equivalent Cat No of Philips/Syska

Supply, install,commissioning and testing of Hi 2TR Wall Split Units indoor/outdoor complete with cordless remote controll unit with inbuilt air ionisor and Plazma filleter for better air quality minimum 3 star rating, invertor type of Make- Voltas/Bluestar/Carrier

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA

K K Construction Co

SNEH TRADERS

Shiv Kripa Tradimg

Shree Builders

GIRNAR CONSTRUCTION

shree chamunda enterprise

divyarsh entrprise