EOT/W/26-27/000065

PROVIDING AND FIXING EXTERIOR QUALITY ALUMINIUM COMPOSITE PANEL (ACP) WALL CLADDING ON EXISTING AL. /MS FRAME WORK WITH GI BRACKETS, ACP FIXED ON THE EXISTING FRAME WORK BY FOLDING THE EDGES OF ACP PANEL (ENGRAVING THE REAR SURFACE OF ACP SHEET) WITH CP ANGLES, CLEATS AND STRAINLESS STEEL SCREWS FORMING GROVES AT THE PERIPHERY OF ACP PANEL. SUCH GROOVES FILLED WITH FOAM AND SILICON SEALANT ETC. COMPLETE WITH ALL MATERIALS (BUT INCLUDING THE COST OF SILICON SEALANT), LABOUR, SCAFFOLDING AND ALL OTHER INCIDENTAL CHARGES COMPLETE IN ALL RESPECT AS PER SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. (MODE OF PAYMENT IS ON FINISHED SURFACE AREA OF ACP) (B) 4MM THICK (0.50MM AL.+3.0MM LDPE +0.50MM AL. PVDF COATING) Aluminium Composite Panel (ACP)

SUPPLYING BUBBLE FREE FLOAT GLASS OF APPROVED MAKE AND BRAND CONFORMING TO IS: 2835-1987; (B) COLOURED, TOUGHENED GLASS CONFORMING TO IS: 2553-1992 (PART-II) (I) 6MM THICK Coloured, toughened glass conforming to IS: 2553-1992

SUPPLYING GLAZING SILICON OF APPROVED MAKE AND BRAND FOR FIXING OF GLASS ON SUB-FRAME AS PER DIRECTION OF ENGINEER-IN-CHARGE FOR STRUCTURAL GLAZING/CURTAIN WALL ETC. GLAZING SILICON FOR FIXING GLASS ON SUB FRAME Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing/Curtain

SUPPLYING WEATHER SILICONE SEALANT OF APPROVED MAKE AND BRAND FOR FIXING OF GROVE LINE BETWEEN THE GLASSES AS PER DIRECTION OF ENGINEER-INCHARGE FOR STRUCTURAL GLAZING/CURTAIN WALL. Fixing of grove line between the Glasses as per direction

SUPPLYING PROFILES OF REQUIRED SECTIONS MADE OF ALUMINIUM ALLOY EXTRUSION CONFIRMING TO IS 732-1983 AND IS 1285-1975 ANODISED WITH REQUIRED FILM THICKNESS AND SPECIFIED COLOUR / NATURAL MAT FINISHED CONFORMING TO IS 1868-1983 FOR FABRICATION OF STRUCTURAL GLAZING, CURTAIN WALL FORMED OF BASIC SECTION OF ANY ISI EMBOSSED / CERTIFIED MAKE AND BRAND AS PER DIRECTION OF ENGINEER-IN-CHARGE. (PAYEMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK). FOR STRUCTURAL GLAZING / CURTAIN WALL WITH 15 MICRON COLOURED ANODISING; FIXING PLATE (WT. @ 0.515 KG PER MTR.) Anodised with required film thickness and specified colour / natural mat finished

SUPPLYING PROFILES OF REQUIRED SECTIONS MADE OF ALUMINIUM ALLOY EXTRUSION CONFIRMING TO IS 732-1983 AND IS 1285-1975 ANODISED WITH REQUIRED FILM THICKNESS AND SPECIFIED COLOUR / NATURAL MAT FINISHED CONFORMING TO IS 1868-1983 FOR FABRICATION OF STRUCTURAL GLAZING, CURTAIN WALL FORMED OF BASIC SECTION OF ANY ISI EMBOSSED / CERTIFIED MAKE AND BRAND AS PER DIRECTION OF ENGINEER-IN-CHARGE. (PAYEMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK). FOR STRUCTURAL GLAZING / CURTAIN WALL WITH 15 MICRON COLOURED ANODISING; FIXING CAP (WT. @ 0.342 KG PER MTR.) Fixing cap (Wt. @ 0.342 Kg per Mtr.)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building /structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for; payment purpose. (2) The payment will be made once only for execution of all items for such works.