PROVN OF WAITING SHED, COVERED BATHING POINT TOILET FOR ICW OFFICE, CAR/SCOOTER STAND NEAR NFS NODE CAR PARKING SHED AND ADDN/ALTN TO BLDG NO P-11 AT MISSAMARI UNDER GE MISSAMARI

Amount

Surface dressing in soft loose soil n exc 15 cm deep and getting out complete all as specified and directed.

Excavating in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out,complete all as specified and directed

Returning filling in ,soft/loose soil, including spreading,levelling,watering & well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) and depositing upto a total distance of 50m where directed at a alevel not exc 1.5m above the starting point complete all as specified and directed .

M&L Cement Concrete with PCC type D 2 1:4:8 (40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed.

M&L for M25 RCC design mix using 20 mm graded aggrete for raft foundation footing ,bases of columns, plinth beams & mass concrete complete all as specified and directed

M&L for M25 RCC design mix using 20 mm graded aggrete for columns, pillars,posts and struts complete all as specified and directed

M&L for M25 RCC design mix using 20 mm graded aggrete for beams, cantilevers, lintels over 1.5 m span complete all as specified and directed.

M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete.

S & F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed) all as directed complete.

Form work for foundation footing , bases of columns & plinth beams similar work vertical or batter complete all as specified and directed

Form work for side of pillars, posts, columns & similar works vertical or batter,complete all as specified and directed

Form work to side & soffits of floor or roof beams lintels & similar works.complete all as specified and directed

M&L for Pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landing, cover slabs (for manhole covers, drains etc) set in CM 1:6 complete all as specified.

M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.

M&L 100mm thick PCC 1:2:4 Type 2 (40mm graded stone aggregate as in Pavings/hardstanding/path, laid in alternate bays, finished even and fair complete all as specified and as directed.

M&L40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC ( WPC shall be measured & paid separately

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth,complete all as specified and directed.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement,complete all as specified and directed.

Supply only integral WPC,complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection complete all as specified and as directed

M&L Sand filling under floors or in foundations including watering and conosoldiation,complete all as specified and directed

M&L for brocken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface,complete all as specified and directed

M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base,complete all as specified and directed

M & L Non skid ceramic colour joint free tiles 7 to 8 mm thick area each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in net cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of cement mortar 1:6,complete all as specified and directed .

M & L Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4,complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed.

Supplying and fixing in frame at site, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section,complete all as specified and directed

S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed,complete all as specified and directed.

S&F 100mm MS butt hinges medium weight,complete all as specified and directed

S&F aluminium handle cast type anodised 150mm size,complete all as specified and directed

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor,complete all as specified and directed.

All as per item No 33 here in before but 20mm dia,complete all as specified and directed

All as per item No 33 here in before but 25mm dia,complete all as specified and directed

S&F 25 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S&F 15mm bore bib tap cast copper alloy fancy type cromium plate with crutch or butter fly handdle screwed down for iron pipe but fancy type,complete all as specified and directed

S&F 15mm bore stop cock/valve cast copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete,complete all as specified and directed

S&F PVC connector 600mm long with brass coupling in both ends screwed down for iron pipe,complete all as specified and directed

S&F10 litre capacity PVC type low level flushing cistern with inlet ball valve, float and handle/push flush type brackets, flush pipe etc complete all as specified and directed .

S&F Vitreous china wash down water closet pan (pedestal pattern white) complete all as directed.

S&F 15mm bore piller tap fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc complete all as specified and directed.

S&F vitreous china wash basin white, flat back, size 550x400mm excluding taps , waste ,but including barkets,complete all as specified and directed.

S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms),complete all as specified and directed

S &F Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms),complete all as specified and directed

S & F cromimum plated helth faucet (Abs body )mild steel Suitable for 15 mm Dia pipe wthd 1.25 mtr long flexible tube of ABS wall houck including making connection and fixing in position complete all as specified and directed

S&F brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed.

S&F 75 mm thick PVC (SWR pipes single socketed in any length with rubber ring joints laid in trenches or floors,complete all as specified and directed.

M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4),complete all as specified and directed

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls,complete all as specified and directed

S & F 110 mm bore PVC (SWR) bends of any radius,complete all as specified and directed

S & F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed

Hoisting & fixing 500 litres Rotational moulded polythylene water stroage tanks (cylindrical vertical with closed top) hoisted & fixed in position all position all as specified in SSR part -I incl all necessary fittingscomplete all as specified and directed.

S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed,complete all as specified and directed.

Supplying, laying and testing of 100 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line complete all as specified and directed..

Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required.

M&L three coat of white wash on wall surface including preparation of surface,complete all as specified and directed

M&L two coats of cement base paint over a coat of primer on wall surface including preparation of surface,complete all as specified and directed

S&F for , Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and directed

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits, welding nut etc confoRming to Fe-410-0 or Fe-310-0.complete all as specified and as directed.

M&l Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth.

M&L Heavy duty (Dura stone) Coloured Ceramic Tiles 300x300x8-10mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L glazed ceramic coloured tiles (300x600)x7mm thick as in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and directed

Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and directed

M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty,complete all as specified and directed

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/ surface to preparatory to distempering complete all as specified and directed

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and as directed

M&L for PCC 1:3:6 type D-2 using 40mm grded crushed stone agg as in foundation filling and mass concrete,complete all as specified and directed

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade With Grey Cement and pigment,complete all as specified and directed

M & L Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 all as specifed

Demolition of brick work built in cement mortar incl all quoins arches pillars etc of any description, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 15 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 20mm thick plaster in cement mortar 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for preparing old surfaces of walls and applying one coat of oil bound distemper complete all as specified.

M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint all as specified and directed.

M&L for Preparation New decorated plastered surfaces of wall and applying two coat of cement base paint over a coat of primer all as specified and directed.

M&L preparation of new plastered surfaces & providing two coats of OBD over a coat of primer,complete all as specified and directed

M&L one coat of white wash on old surfaces of ceiling including preparation of surfaces,complete all as specified and directed

M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including screed bed in CM 1:4 complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface complete all as specified and directed.

M&L for foundation 1:2:4 type B2 using (40mm graded stone aggregate) in fdn filling as in post holes complete all as specified and directed.

S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

S & F for Welded steel wire fabric, 4mm dia galvanised steel wire 50x50mm mesh made up into matress or cages, lapped, wired and laid in position and fixed complete to steel members n.exc 4kg per Sqm, fixed complete to steel members.

M & L for Non skid mat finish ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron),complete all as specified and directed.

S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl poder coating of any colour (thick ness of powder coating not less than 50 micron).

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc complete all as specifid power coating of any colour(thickness of power coating not less than 50 micron.

M&L fixed for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work complete all as specified and directed.

S&F anodised aluminium grill ( anodised trasparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC15 of approved design/pattern with approved standared section and fixed to the exising windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre all complete as per requirments and as directed

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,tec.

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including PVC conduit of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / bell point controlled by one switch. Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. 2. Cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3)and ,putty and plastic paint matching with existing surface etc; shall be deemed to be included in the rate quoted above. :

Description all as per item No 101 here in before but for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator

Description all as per item No 101 here in before but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

S & F switch piano (White) single pole flush type 5 amps, 220 volts.complete all as specified and directed.

S & F ceiling rose (White) three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F Switch socket combination (White) flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts complete all as specified and directed.

S & F ceiling fan regulator (White) step type 2 module , flush type heavy duty suitable to work on 230 volts Ac supply omplete all as specified and directed.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door openable complete all as specified and directed.

S & F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, B-curve, complete all as specified and directed.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, B-curve, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative ultra slim round profile LED lighting fixture with extruded polycarbonate , environmental friendly energy efficiebt ready to use pack with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed

Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified. NOTE :- Punned thickness only will be measured and paid.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) duly connected with flexible cable including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia connected to main earthing lead from earth electrode to test point upto 7.5 metre drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

Description all as per item No 101 here in before but One 3 point 5 Amps socket outlets point controlled by one switch on the same board

Description all as per item No 101 here in before but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Socket outlet(White) 2 in 1, 5/6 pin, 5 Amps complete all as specified and directed.

S&F Switch socket combination (White) 2 in 1 5/6 pin, 15 Amp flush type universal.complete all as specified and directed.

S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed.Make-L&T/ Schneider/ Legrand / Seimens

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 8 way double door openable complete all as specified and as directed.

S&F heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type Make : Orient /USHA/ Havells/Crompton.

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system duly concealed complete enclosure all as specified

S & F MCB SPN 230 volts suitable for fixing in MCB SPN DB of capacity 32 amps complete all as specified and directed.Make-L&Tor equivalent in Schneider/ Legrand/Seimens.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Supply and fix 3- layer PP-R Polypropylene pipe of outer dia 32mm random copo- lymer) conceal- ed pipes SDR 7.4 (PN16) UV stabi- lized and antimi- crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & alll brass threaded polypropylene random fittings required such as Tees , Elbow , Bends , reducers etc laid in trenches complete all as specified and directed.

Supply and Fix PP-R Gate valves (brass insert) of size 32mm as per requirement of the site complete all as specified and directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63/50 mm PPR pipe into 80 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63 mm x 32 mm/50MMX 32MM including cutting and making fusion joint etc all as specified and directed.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 50 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia and fixed complete all specified and as directed.

S H ENTERPRISES

M/S TANISHQ CONSTRUCTIONS