Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.6 L
EMD Value
₹5,609
Closing Date
16 Oct 2026, 11:00 am5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Er. Rajiv Kumar, Dy. C.E.
(OP) Circle, HPSEBL, Dalhousie
Tender for Repair and Maintenance, Painting, Tiling ,Aluminium Fiitting and Sanitary Fitting works at 33/11kV Sub-Station building Kotla and Repair and Maintenance of damaged brick pillar of right side panel fencing at Soldha under ED Jawali
2026_HPSEB_145259_1
Bid No. OCD/DB/Bid-34/2026-27
Open Tender
Civil Works
Turn-key
180 days
Jawali
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹5,609
9 Oct 2026
9 Oct 2026
17 Oct 2026
9 Oct 2026
16 Oct 2026
9 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Repair and Maintenance, Painting, Tiling ,Aluminium Fiitting and Sanitary Fitting works at 33/11kV Sub-Station building Kotla and Repair and Maintenance of damaged brick pillar of right side panel fencing at Soldha | - | - | - | - |
| 1.02 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. | 48.69 | Sqm. | 281.08 | ₹13,685.79 |
| 1.03 | Distempering with oil bound washable emulsion of approved brand and manufacture to give an even shade Old work (two or more coats) over and including water thinnable priming coat with cement primer | 492.85 | Sqm. | 102.98 | ₹50,753.69 |
| 1.04 | Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 492.85 | Sqm. | 90.49 | ₹44,598 |
| 1.05 | Painting with synthetic enamel paint of approved
brand and manufacture of required colour to give an
even shade
One or more coats on old work With Readymixed paint (White) | 176.26 | Sqm. | 57.25 | ₹10,090.89 |
| 1.06 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 492.85 | Sqm. | 9.04 | ₹4,455.4 |
| 1.07 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) (a) for door windows and ventilators and glazed partition frames | 247.53 | Kg | 412.67 | ₹1,02,148.21 |
| 1.08 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes | 34.2 | Sq.m | 901.2 | ₹30,821.04 |
| 1.09 | Providing & Fixing Prelaminated board 12mm flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on both side | 3.12 | Sqm | 956.97 | ₹2,985.75 |
| 1.1 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete | 12 | Sqm | 683.12 | ₹8,197.44 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
SBD_Revenue_Bid_34.pdf
Tender Documents • 0.52 MB
BOQ_216296.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .