Supply and Installation of new compound lights in side the Stack Yard areas of Palassey Highway Section PWD

Amount

Supply of 2/3/3.5 Core PVC/XLPE Insulated & Sheathed Armoured/unarmoured Aluminium/Copper Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / Havells/Gloster/Currency] a) 4 core 10 Sq. mm [ NS ]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed 1(a) /F-2]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. Upto 10 Sq mm 4 core [7(c)/F-4]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials Upto 10 Sq mm 4 core [8b(xi)/F-5]

Supply and fixing of double arm bracket made of 40 mm dia G.I type (Jindal/ Bansal-M) 1.5 mtr long inluding fixing MS pole cap on the top of the pole wirth set screw and 1 nos through bolt including painting.

Fixing only Floodlight/ LED Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. [20 a / C-3 ]

Supply 250V 100 watt outdoor type Rectangular LED Flood light with innovative thermal management with pressure dia cast aluminium housing with IP 66 protection ( make- Crompton Greaves) cat no- LFLN-100-CDL/60.) (NS)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground evel and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By TATA-Medium GI pipe [2 B (G-1)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages [5(a) ii /G-2 ] a) No 6 S.W.G wire

Excavation of soil for installation of Earth Electrode and filling & ramming. For soft soil [ 1(a)/G-1 ]

S&F 300mmX300mmX100mm sheet metal (2mm thick) box with hinge type glass window door & locking arrangement fixed on wall. Consisting of DIN Rail, 1nos 2A sliding fuse & 1 nos 12 way 40A bakelite connector & necessary connection by suitable size copper wire. The box will be painted as per GS.[NS]

S&F digital time switch on din rail on existing box incl. necessary connection. L&T make crono time switch [cat no 67DDT0] [N/S]

S&F40 A 3pole power contactor on din rail on existing box incl. necessary connection. L&T make MNX 40 - [cat no - CS94190][N/S]

Supplying and fixing 240V 40A TP MCB (of Breaking capacity 10kA & C characteristics on din rail of existing box and necessary connection ( L & T - Make) [7/D-6]

Wiring with 2X 1.5 Sqmm PVC copper wire in 13mm dia polythene pipe from loop box to LED/HPSV fitting. [N/S]

Supply & Delivery of 9 mtr Steel Tubular pole (Zindal/Bansal) as per specification Type 410-SP-29 as overall length 9 mtr, weight 125 kg & having dimension as per details given below: Outside & thickness of the bottom section (139.7x4.85) mm, Middle-(114.3x4.5)mm, Top Section (88.9x3.25)mm, with fixing the base plate as per direction of EIC. [N/S]

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts . above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Up to 9 mtr Size 0.6x0.6x1.70mts [1(a)/H-1]

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary.( Without loop box)[13(a)/I-1]

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. ( 250 x 250 x 100mm )[16(b)/I-2]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand aper/emery paper, cleaning etc. for receiving fresh coat of paint (Upto 9.0 mtr. long pole)[4(a)/H-2] i ) 1st coat of aluminium paint over 1 coat of RO priming

ii) 2nd coat of aluminium paint over 1st coat

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS 40 mm dia [11(g)/F-6]

Supplying and fixing of 63A 415 volt FP Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc a) Havells [2b/D-1]

Supply and delivery of 250V 100 watt outdoor type Rectangular LED Flood light with innovative thermal management with pressure dia cast aluminium housing with IP 66 protection ( make- Crompton Greaves) cat no- LFLN-100-CDL/60.) (NS)

Supply and delivery of 250V 92 watt Tango Mini Flood Light Versatile out door type floodlight, packed with features to suit diverse floodlighting applications. It ensures savings on initial capital, and also delivers reliable operational savings with IP 66 protection ( make- PHILIPS) cat no-BVP192 LED110 CW HO NB FG GR PSU) with HSN CODE - 9405 (NS)

Supplying and delivery of 240V 40A TP MCB (of Breaking capacity 10kA & C characteristics ( L & T - Make) [7/D-6]

Supply and delivery of 40 A 3pole power contactor, L&T make MNX 40 - [cat no - CS94190] [N/S]

Supply and delivery of 40 A 3pole power contactor coil for MNX 40 L & T make Power contactor .- [cat no - CS94190] [N/S]

Supply & delivery of 250V,4' 40 W fluo . Tube light (Philips - make)

Supply and delivery of 40 Wt tube starter

Supply & delivery of 4 ft 40 watt T-5 flourrscent tube light. (Make- Philips )

Supply & delivery of 250V,4' 22 Watt LED tube light (Philips - make) (MAS)

Supply & delivery of 250V, 9 Watt LED lamp (Philips - make)

Supply & delivery of 250V, 45Watt LED Lamp (Philips - make)

Supply & delivery of 230V 100W B.C lamp (Philips - make)

Supply & delivery of 230V 60W B.C lamp (Philips - make)

Supply and delivery of 70-400 Wt 3 pole Ignator ( Make- Philips) ( box type)

Supply and delivery of 150-400 Wt 2 pole Ignator ( Make- Philips) ( box type)

Supply and delivery of Straight Batten holder (make- Anchor)

Supply & delivery of 15A Top plug [Anchor- make]

Supply & delivery of 250V,16 Amp SP MCB ( Make- LEGRAND )

Supply & delivery of 250V,10 Amp SP MCB ( Make- L&T ) ( "C" curve)

Supply & delivery of 250V,6 Amp SP MCB ( Make- L&T )

Supply & delivery of 250V,6 Amp SP MCB ( Make- HAVELLS )

Supply & delivery of 250V, 40 Amp DP isolator (Make- standard)

Supply & delivery of 250V, out put open/short Circuit protected LED DRIVER [ 4415 370 04670] (Make- Philips) for 25W out door light.

Supply, installation, testing and Commissioning of Glow sign Board with ACP box supported structure made with 40x40x6 mm M.S angle iron frame Fabricated all around. The 3mm ACP facial should be provide with Laser cutting of 6mm laser cut acrylic letter out of which 5 mm rising and border line of side should be cover 40mm x 40mm x 1.6 mm aluminum angle 1.5" aluminum channel, as per direction of EIC. The sign board should be illuminated by 18W LED tube light fittings (12Nos) [Make- Philips, cat no TMC 501 P1 x TLED 22W P3242) with 18 W LED T-8 light (Type MAS LED tube 1200mm 18 W 865 T 8I) to be fixed on flat iron structure fabricated for fixing purpose with Bakelite terminal box. Back side of the board should be covered with 18 SWG MS sheet to protect the rain water. Ventilation system & hinges doors to be provided on back side of the stricture for fixing electrical fittings including nuts, bolts and washer etc. The complete glow sign board is to be fixed in front of the security room with the help of "H" Structure made with 150mm "I" beam of length 20ft with its muffing. LED tube light fittings should be connected with 15Amp Kit Kat fuse with necessary connection by 1.5 sq mm copper wire for its internal wiring including supplying PVC box with 1 no Piano switch of 15Amp from its nearest power supply. [NS] NOTE:- NOMENCLATURE IS AS ATTACHED DOCUMENTS. SIZE OF THE BOARD [12' X6' X 10" ]`

Charges for carrying the above glow sign board from Kolkata to Site including the loading and unload with own tools tackles.

THE UP TO DATE ENGINEERS CO-OPERATIVE SOCIETY LTD.

M/S. GHOSH ENTERPRISE

Gem Engineers Co-coprative Society Ltd

Safiuddin Biswas And Co.