SPECIAL REPAIR OF SE SECTION (BUILDING No T-60) AT INS GARUDA KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish of premises complete all as specifeid and directed.

M&L for Vitrified ceramic tiles, light shade, 9-10 mm thick (Square / Rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match, including 15 mm thick Screed bed or bedding layer in Cement Mortar 1: 4, complete all as specified and as directed by Engineer in Charge.

M&L for Vitrified ceramic tiles, light shade, 9-10 mm thick, (Square/Rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in with epoxy joint filling using kerapoxy of MAPEI or equivalent on floor over 10mm thick screed in CM 1:4 complete all as specified.

M&L for Glazed ceramic tiles coloured , as in vertical surfaces, tile of area exc 0.09 Sqm and not exc 0.18 sqm, 6 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar removing rubbish of premises complete all as specifeid and directed.

M&L for Granite (of any type) tiles18- 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with dmixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick cement screed in CM 1:4 complete all as specified and as directed by Engr -in - Charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engineer in Charge.

M&L for 25mm thick PCC 1:2:4, Type B-0(using 12.5 mm graded aggregate) as in repair sub base of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F anodised aluminum snap grid false ceiling comprising of (Main Tee 38x25x1.40mm and Cross Tee 25x25x1.2mm wall angle 25x25x1.30) incl 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with stainless steel screws; having grid of size 605mmx605mm, including hangers 6 mm dia. GI (upto 1200 mm length) adjusting level fixed to roof slabs or steel truss by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia. 40 mm long, including one coat of oil bound distemper complete all as specified and directed.

Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Taking down cement plaster on Brick wall including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 8mm thick cement plaster in CM 1:4 with wpc @3% by weight finished even and fair without using extra cement over 12mm thick back coat on brick wall surfaces with cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on brick wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for one coat of brush bond TGP crustalline capillary water proofing system for cementitious substrates for waterproofing against the positive or negative sides of wall for damp proofing, repairing cracks, plugging holes and stopping active leakage complete all as specified and directed by Engr in charge

M&L for preparation of newly prepared plastered surfaces of wall and applying two coats of antifungal paint over a coat of anti dampness primer, complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of anti dampness primer and 1.50 mm thick wall care putty complete all as specified and directed.

Supply only integral Water Proofing Compound, complete all as specified and as directed by Engineer in Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work

M&L for second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in framed work,complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering including tile battens complete all as specified and as directed .

S&F for Pre-painted galvalume aluminium zinc coating AZ150 GI based corrugated steel sheet 0.55 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted plain sheet 0.55 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F Roof trusses (framed) confirming to Fe 410W,Gde E 250 quality A truss, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr in Charge.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not oterwise described and applying two coats of epoxy coated paint over one coat of epoxy primer complete all as specified.

M&L for preparation of old steel surfaces of any description upto a height of 15 metres, over 10 cm in width or girth not otherwise described and applying one coat of epoxy coated paint over one coat of epoxy primer, complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm, complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm, but not exceeding 4 Sqm, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified

Supply and fixing 100mm size Stainless Steel butt hinges, medium weight, complete all as specified and directed.

Supply and fixing 150 mm size extruded, anodised aluminium alloy handles, fabricated type, complete all as specified and directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S&F for powder coated aluminium anodised frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron), complete all as specified, and as directed.

S&F anodised aluminium powder Coated (minimum thickness of powder coating 50 micron) window and ventilator shutters side or top hung without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) complete all as specified

S&F powder coated aluminium sliding window and ventilator frame without sash bar including all necessary jointing cleat, hold fasts, rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium hanlde, locking arrangement etc based on HINDALCO catalog No. 1. 4087- 92.36x29.70x1.20mm = 3 Track Bottam 2. 4099- 92.36x29.70x1.20mm = 3 Track side and top 3. 9395- 39.00x20.00x1.10mm = Shutter Vertical 4. 3994- 41.00x20.00x1.20mm = Shutter top & Bottom. 5. 9779 - 39.00x20.00x1.16mm = Shutter Vertical inter lock complete all as directed by the Engineer-in-Charge.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge

S&F in repairs, aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc. (minimum thickness of powder coating 50 micron), Section used for partition as per Catlogue No. 9223 of size 63.58x38.10x2.00 mm (single partition vertical & horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and as directed.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

S&F Sheet glass ordinary quality, 4.00 mm thick and glazing with rubber beading or aluminium powder coated snap beading oil putty/ beads in squares or rectangular area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing rubber beading or aluminium coated snap beading in square or rectangular area exceeding 0.50 Sqm in each pane complete all as specified and as directed.

Supply and fixing 4.00mm thick frosted glass, pin head type and glazing with oil putty/ beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for complete removal of existing treatment of exterior surface including washing, rubbing down and applying two coats of antifungal paint over a coat of Anti dampness primer complete all as specified and directed.

S&F aluminium powder coated deco grill, having mesh size 50mm x 50mm made out of 6 mm wide 3 mm thick aluminium section including 'U' clips and all necessary fixing arrangements, complete all as specified and as directed .

Supply and fixed in repairs, stainless steel curtain rail bright finished, 25 mm dia. decorative type, complete all as specified and as directed by Engineer in Charge.

Supply and fixed in repairs, stainless steel bright finished decorative brackets/ finials for curtain rail 25mm dia., complete all as specified and directed.

Supply and fix, aluminium alloy body door stopper and tongue anodised with hard drawn steel spring in floor, 140mm over length of cover plates, complete all as specified and directed.

S&F aluminium (extruded section) Door Closer, hydraulically regulated, Designation No.3 Universal Type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw, complete all as specified and directed.

S&Fin repair for PVC backing looking mirror of size 45cm x 120cm fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe.

Supply and fixing in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair Vitreous china urinal partition white of size 310x700 mm all as specified and as directed by Engr -in-Charge.

Supply and fix in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repairs, PVC Bathroom Cabinet (White) of size 420mm x 300mm x 100mm (Approx.), with single shutter and built in mirror in front of shutter, complete all as specified and as directed by Engineer in Charge.

S&F in repairs, corner glass shelf of 5mm thick, plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engineer in Charge.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms.

Supply and fix in repair Waste coupling of PTMT 32mm bore dia (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed.

M & L in repairs for 50 mm dia Cast iron floor trap, with grating including jointing to each waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M & L in repairs for 50 mm dia Cast iron Nahani trap, with grating including jointing to each waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified

S&F in repair SS soap dish complete all as specified. Make : Parryware Cart part No.T6902A1 or equivalent make of Cera/Hindware

M & L for demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for RCC nominal mix 1:11/2:3 (using 20mm graded aggregate) for Foundations for platform for keeping equipment complete all as specified and as directed by Engr -in -Charge.

Use and waste of Formwork to sides of concrete Foundations for platform for keeping equipment complete all as specified

M & L TMT bars 10mm dia and over cut to length, bent to shape required including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia and securing with clips complete all as specified and as directed by Engr-in-charge.

M & L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape reuired including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia and securing with clips complete all as specified and as directed by Engr-in-charge.

Taking down existing wall panelling and similar works, complete all as specified and as directed.

S&F 6mm thick PVC heavy grade hollow profile designer wall paneling of approved quality fixing in wall, including all aluminium square tube used for battens in wall and matching aluminium angle at top of panelling and door or window edges and matching PVC beading in floor complete all as specified and directed by Engr-in-charge. Note : Thickness of aluminium square tube and wall angle shall not be less than 1.20mm thick

M&L for complete removal of existing surfaces and applying two coats of oil bound distemper over a coat of Anti dampness primer and 1.5mm thick wall putty complete all as specified and directed.

S&F powder coated aluminium sliding window and ventilator frame without sash bar including all necessary jointing cleat, hold fasts, rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium hanlde, locking arrangement etc based on HINDALCO catalog No. 1. 4095- 61.98x29.70x1.60mm = 2 Track 2. 4096- 61.98x29.70x1.60mm = 2 Track side or Top 3. 9777- 39.00x20.00x1.60mm = Shutter Vertical 4. 3994- 41.00x20.00x1.20mm = Shutter top & Bottom. 5. 9778 - 39.00x20.00x1.50mm = Shutter Vertical inter lock complete all as directed by the Engineer-in-Charge.

M &L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate over 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/sqm over existing PCC floor as specified in the design with overloap between adjacent strips and at transverse joints as minimum 300mm complete all as specified and directed by the Engineer-in-Charge

M &L for vitrified ceramic tiles, light shade, 9-10mm thick (square/Rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, laid in floors with approved adhesive as per manufacture instructions complete all as specified and directed by the Engineer-in-Charge

M &L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement incl demolition of existing plinth protection complete all as specified and directed by the Engineer-in-Charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.all as specifeid and directed.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for the following:-

One light point controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

One fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed by Engineer-in-Charge.

One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed by Engineer-in-Charge.

One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No 87 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No 87 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure for AC point complete all as specified and as directed by Engineer-in-Charge.

S&F modular switch 1 way 6 Amps,1 module complete all as specified and as directed by Engineer-in-Charge.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed by Engineer-in-Charge.

S & F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

S&F switch 15 A One way SP modualr type complete all as specified and as directed by Engineer-in-Charge.

S&F fan regulator electronic step type, 230 V, 5 step, modular type, 120 W, 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 20 W LED tube light 230 V, 50 Hz, min 120 lum/W wall mounted LED batten with polycarbonate housing complete all as specified and as directed by Engineer-in-Charge. Make : Havells Cat Part No. LUMILINEBS20WLED865SPCWH

Supply & fix LED down lighter 2'x2' , 36 W, 120 Lumen/ Watt, 240 volt including drivers,fittings and fixtures complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No. VENUSNEOHE2X2PLR18-42WLED865MOD or Crompton Cat Part No. LCTLRN-36-FO-CDL/ Philips Cat Part No. RC380BLED36S-6500G4L60PSUOD.

Supply & fix LED down lighter 2'x2' surface mounted, 36 W 240 volt, 120 Lumen/ Watt, complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No. PLANOSUR4X1PLS36WLED857S0720 or Philips/ Crompton

S & F for LED Mirror light fitting 8 watt, 100 Lumen/ Watt, with connected accessories complete all as specified and as directed by Engineer-in-Charge. Make :Polycab Cat Part No. LD00103040 or Crompton Cat No. LDL-10-WW, Luker Cat Part No. LTSM10

Supply and fix LED 'T' type retrofit fitting 14 Watt, 6500-7500K, 1400 Lumen, polycarbonate material complete all as specified an as directed. Make : Philips Cat Part No. TLL-14W-6500K-B22 or equivalent ot make specified in PS

Supply and fix 12 watt LED bulb min 100 Lum/watt, 230 Volts, 50Hz for fixing in lamp holder with connected accessories complete all as specified and directed by Engr-in-Charge. Make : Luker Cat Part No LBPC12CL or Crompton/ Philips

Taking down existing Flood Lights/ Building Security Lights of any type or make or at any height and removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt , 120 Lumen/ Watt, including complete all as specified and as directed by Engineer-in-Charge.all as specified and directed. Make : Crompton Cat Part No. TRP-417-45-57-SL-LM-NBK or Philips HSN code 94054090/ Jaguar Cat Part No. LPCRSRT45WXW.

Same as Item No. 103 above, but of 100 Watt complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Cat Part No. TRP-411-100-57-SL-GL-NSG or Philips HSN code 94054090/ Jaguar Cat Part No. LPCRSRT100WXW.

S&F LED flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection, 3000 K, with 10 KV SPD of 150 watt min 110 lum/watt complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Cat Part No. TFS-510-150-57-60D-HL2-LM-NGG or Luker/ Philips

Taking down ceilingfan/Exhaust fan, Painting of celing fans/Exhaust fan complete, including taking down rods in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and hanging in original as directed position and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed by Engineer-in-Charge.

Taking down existing wall mounting fans of any make and size including servicing, cleaning, oiling (painting if required) all as per site requirement and refixing the same on existing/proposed location complete all as specified and as directed by Engineer-in-Charge.

Supply and fix wall mounted fan AC single phase, 230 V of size 300 mm sweep with blades and frames complete all as specified and as directed by eng-in-charge Make: Havells CAT Part No :D'zire HS or Crompton/ Bajaj

Taking down existing ceiling fans of 1200 mm sweep complete and removing to workshop for following repairs & re-fixing at any location complete all as specified and as directed by Engineer-in-Charge. (a) Strip opening/ cutting of the ceiling fan and rewinding with super enamelled copper winding wire of same capacity, heating, baking, (b) Replacement of ball bearings of suitable size. (c) Replacement of fan capacitor 2.5 m.f.d

S&F energy efficient ceiling fan of 1200mm sweep 230 Volt 50 Hz including all electrical connection complete all as specified and as directed by Engineer-in-Charge. Make : Atomberg Cat Part No AMEZA/ Orient Model Ecotech Neu BLDC 5 star / Gold Medal Cat Part No GEO FOX White Note : old fan to be deposited with MES store yard.

S&F 600 mm sweep, metal body exhaust fan heavy duty, single phase 230 Volts, 900 RPM complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat Part No. Turbo Force SP or Crompton Cat Part No. EXHD300-4-1 / Bajaj. Note : Old fan will be deposited in MES store yard.

S&F 300 mm sweep, PVC body exhaust fan heavy duty, single phase 230 Volts, complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat Part No. Ventil Air-DSP or Crompton / Bajaj. Note : Old fan will be deposited in MES store yard.

Taking down existing MCB DB SPN with MCBs of any type and size and removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Taking down existing MCB DB TPN with MCBs of any type and size and removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Taking down existing Power unit of any type and size and removing to store yard complete all as specified and as directed by Engineer-in-charge

S & F Power Unit 25 Amp modular type for Acs/ Geysers Make Havells Cat Part No AHOO002504 complete all as specified and as directed by Engineer-in-Charge.

S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 6 way with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed by Engineer-in-Charge. Make: Indo Asian Cat Part No. 810531 or equivalent in L&T/ Legrand

S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 4 way with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed by Engineer-in-Charge. Make: Indo Asian Cat Part No. 810530 or equivalent in L&T/ Legrand

S&F Sheet metal enclosure TPN for DB 4 Way for incoming MCB 4 Pole with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed by Engineer-in-Charge. Make: Indo Asian Cat Part No. 811856 or equivalent in L&T/ Legrand

S&F SPN sheet metal enclosure for DB 12 ways Double door complete all as specified and as directed by Engineer-in-Charge.

S&F SPN sheet metal enclosure for DB 8 ways Double doorcomplete all as specified and as directed by Engineer-in-Charge.

S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed by Engineer-in-Charge.

Supply and fix metal enclosure with MCB 4 Pole 63 amps 415 Volts, 50 Hz complete all as specified and directed by Engineer-in-charge Make : Indoasian Cat part No. 811962

Supply and fix metal enclosure with MCB 3 Pole 32 amps 415 Volts, 50 Hz complete all as specified and directed by Engineer-in-charge Make : Indoasian Cat part No. 811960

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 40 to 100 AMP current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TP 25 To 63 AMP current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

S&F MCCB 4 pole, 415 Volt fixed type 125 Amps with breaking capacity 16 KA complete all as specified and as directed by Engineer-in-Charge. Make Indoasian Cat Part No. 830023 or L&T/ Legrand

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed by Engineer-in-Charge.

Taking down old sub main wiring of any type and size and removing to store yard, making good disturbed wall surfaces matching with existing surfaces complete all as specified and as directed by Engineer-in-Charge.

M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length.

All as per item No 131 but 2 single core 6 Sqmm with 6 Sqmm earth wire complete all as specified and as directed by Engineer-in-Charge.

All as per item No 131 but 2 single core 10 Sqmm with 10 Sqmm earth wire complete all as specified and as directed by Engineer-in-Charge.

All as per item No 131 above 4 runs of 16 Sqmm PVC copper conductor including 1 runs of16 Sqmm copper conductor as earth wire complete all as specified and as directed by Engineer-in-charge

Taking down existing LT cable of any type and size for reuse or taking credit complete all as specified and as directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) on walls with clamps, saddles, screws etc for building security light of 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 136 above but for 50 sq mm 3.5 core complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 136 above but for 95 sq mm 3.5 core complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing street light control panel, three phase 3 KW load with 24 hour Digital timer, Contactor rating 32 Amps TP, MCB rating 40 Amps TPN including taking down old one of any type/size complete all as specified and as directed by Engineer-in-Charge.. Make : Havells Cat Part No. IHXTS03060 or equivalent as per Particular Specification

Material and Labour for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Material and Labour for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Material and Labour for removing excavated material in soft/loose soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge

Material and Labour for excavating sand and using standard mesh screen for preparing riddle sand including filling,spreading and ramming of riddle sand complete all as specifed and directed by Engineer-in-charge

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1,flat , size 250 mm x 150mm x 40mm complete all as specifed and directed by Engineer-in-charge

M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 25x4 mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber,RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh complete all as specified and as directed by Engineer-in-Charge.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed by Engineer-in-Charge. Make: Supreme or equivalent manufacturers mentioned in list of manufacturers

All as per item No 146 here-in-before but of size 25 mm dia complete all as specified and directed by Engineer-in-Charge.

All as per item No 146 here-in-before but of size 20 mm dia complete all as specified and directed by Engineer-in-Charge.

S/F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and directed by Engineer-in-Charge. Make: Supreme or equivalent manufacturers mentioned in list of manufacturers

S/F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and directed by Engineer-in-Charge. Make: Supreme or equivalent manufacturers mentioned in list of manufacturers

Supply and fixing of Bib tap CP, Quarter turn with flange and areator, fancy type Long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm , complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008152 of Cera or equivalent manufacturers mentioned in list of manufacturers)

Supply and fixing of CP Bib cock short body with flange and nozzle for garden/ washing machine of size 15 mm including necessary fixing accessories with GI/ CPVC pipes and taking down old unserviceable tap of any make complete all as specified and as directed by the Engineer-in-Charge. (Make : Cera Model No. F2002153 or equivalent manufacturers mentioned in list of manufacturers)

Supply and fixing 15mm angle valve,quater turn with flange, with flange type chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F8040204 of Cera or equivalent manufacturers mentioned in list of manufacturers)

Supply and fixing two way angle cock with flange 15 mm, chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2002211 of Cera or equivalent manufacturers mentioned in list of manufacturers)

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm and taking down old unserviceble one, complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO: F2002362 of Cera or equivalent manufacturers mentioned in list of manufacturers)

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , complete all as specified and directed by Engineer-in-Charge.(Make : Model No: F8030108AB of Cera or equivalent manufacturers mentioned in list of manufacturers)

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and all as specified and as directed by the Engineer -in-Charge. Cat Part No. F7020108AB of Cera or equivalent manufacturers mentioned in list of manufacturers

Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed by the Engineer -in-charge (Model No F9020203 of CERA or equivalent manufacturers mentioned in list of manufacturers

S&F sink cock wall mounted with 6 inch long swivel spout and wall flange complete all as specified and directed by Engineer-in-Charge. Model No. F1018251 of Cera or equivalent manufacturers mentioned in list of manufacturers

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engineer-in-charge.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters including inlet, outlet, over flow wash out and Air pipe conncetions complete all as specified and directed by Engineer-in-Charge. Note: Three layered structure PVC tank to be installed with necessary connections.

S/F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed by Engineer-in-Charge.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and directed by Engineer-in-Charge.

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and directed by Engineer-in-Charge.

Taking down old GI/ CPVC pipe of size 40 mm complete all as specified and directed by Engineer-in-Charge.

Taking down old CPVC ball valve of size 20 mm /25 mm complete all as specified and directed by Engineer-in-Charge.

Taking down old bib tap, angle valve, health faucet, angle cock, shower, sink cock complete all as specified and directed by Engineer-in-Charge.

Taking down old swivel overhead complete all as specified and directed by Engineer-in-Charge.

Taking down old rotational moulded polythene water storage tanks of capacity 2000 ltrs complete all as specified and directed by Engineer-in-Charge.

Taking down old PVC connection complete all as specified and directed by Engineer-in-Charge.

M.J.JOY AND COMPANY (BID ID -3360334)

Oriental Constructions (BID ID -3357522)

MS BUILDERS (BID ID -3362014)

K THOMAS AND COMPANY (BID ID -3362294)

SUKU CONSTRUCTIONS (BID ID -3360213)