Repairing and Renovation of ICDS School (Beltala Primary School) at Bejikhali Lane e in Booth No 102, Ward No 15 under APAS within Krishnanagar Municipality. SL NO- 23

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Supplying, fitting and fixing UPVC down pipes A type and fittings conforming to 15 13592-1992 with necessary clamps nails including making holes in walh, etc. and cutting trenches in any soil, through mascery concrete structurs etc. if necessary and mending good 3 damages including jointing with joiming materials (Spun yam valamoid/hitumen/M. seal etc.) complete UPVC Pipe 110mm dia

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto4m. (i) Tor steel/Mild Steel II. JSW/ JSPL/ SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/ SSL

Wood work in door and window frame fitted and fixed complete including a protective coat of pain;ing at the contact surface of the frame. e) Sal: Malayasian In Ground Floor

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of cost of hinge and other fittings. In ground floor. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 Cm. (b) Sishu, Gamar, Champ, Badam. Bhola, Mogra, Hallak In Ground Floor

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting. c) 300 mm long

Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. 230/72 fitted and fixed complete. a) With continuous plate base hexagonal/round rod. (v) 125 mm grip x 12 mm dia rod.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ii) With 1 : 4 cement mortar. c) 10 mm thick plaster.

ii) With 1 : 6 cement mortar. c) 15 mm thick plaster.

ii) With 1 : 6 cement mortar. c) 20 mm thick plaster.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground Floor: (b) Two Coats

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of 16 Superintending Engineer) (Two coats) 1) Standard Quality

For GST add @ 18% over item no 1 to 16

For Cess add @ 1% over item no 1 to 17