Structural Glazing work

STRUCTURAL GLAZING: od248851/2021_2022:Providing and fixing structural glazing using powder coated aluminium extruded architectural sections of size 71.2x28x2.8mm(1.136kg/m) to form grids of size maximum of 600x750mm and fixing 5mm thick approved reflective type glass. Securely fixing the basic frame work on to the masonry/rcc/ms structure with adequate and properly designed anchor fastners, fischer/hilty make nuts and bolts etc including providing himax windows in required intervals. complete. as per the drawings/directions of engineer in charge and specifications. (It shall be measured out to out of the basic frame work in square meter for payment.)

od248854/2021_2022 Providing, fixing and fabricating powder coated aluminium extruded tubular and other aluminium sections of required size, colour and shade as approved by the Engineer-in-Charge for fabricating basic frame work for partially or fully panelled/glazed/louvered partitions including cleats, sleeves, stainless steel screws, washers, nuts, bolts etc. necessary for fabrication of extruded aluminium frame work as per the architectural drawings and/or directions of engineer in charge. The extruded prefabricated frame work shall be fixed to the wall/ floor/ beam with M.S brackets and screws. (Measured length of powder coated aluminium extruded sections converted to weight shall be considered for payment.)

od248860/2021_2022 Providing and fixing Aluminium composite panels of approved make and colour made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, EPDM/neoprene gasket, backer rods etc. (Actual area of ACP in sqm shall be measured for payment. The cost aluminium extruded frame work shall be paid seperately under the specified item.)

od248871/2021_2022 Providing and fixing glazing in parititions with 5mm thick clear/reflecting type glass of approved make using EPDM rubber/neoprene gasket or structural silicon sealant/VHB tape etc. complete as per the architectural drawings and/or the directions of engineer in charge. (Area of opening for the glass fixing shall be measured for payment in sqm. The cost aluminium extruded frame work shall be paid seperately under the specified item.)

od249429/2021_2022 Providing and fixing glazing in parititions with 8mm thick float glass of approved make using EPDM rubber/neoprene gasket or structural silicon sealant/VHB tape etc. complete as per the architectural drawings and/or the directions of engineer in charge. (Area of opening for the glass fixing shall be measured in sqm for payment. The cost aluminium extruded frame work shall be paid separately under the specified item.)

od249466/2021_2022 Providing and fixing louveres made of powder coated aluminium extruded louver profiles (min 0.400 kg/m) fixed to basic partition frame work including fastners, screws etc. complete. (Area of opening for fixing louvers shall be measured in sqm for payment. The basic partition frame work shall be paid under relevant item.)

od249512/2021_2022 Providing and fixing removable/hinged fly proof mesh/screen made of powder coated aluminium extruded sections of size 28x13mm(min 0.220kg/m) or equivallant for fly screen shutter frames fixed to basic frame work. The fly proof stainless steel 304 grade wire gauge with average width of aperture 1.4mm in both directions and wire of diameter 0.5mm shall be fixed to the shutter frame using EPDM/Neoprene gasket including screws, hinges, fastners, nuts, bolts etc. complete. (Area of opening for fixing the flyproof shutter shall be measured in sqm for payment. The cost of basic frame work shall be paid under relevant item.)

od251411/2021_2022 Providing and fixing 6mm thick Thomson multiwood panels(regular) of approved colour and shade using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, EPDM/neoprene gasket, backer rods etc. The panel shall be cut in to match the grid size in required lenth and width as per the drawing or direction of engineer in charge. (Area of opening for fixing the panel shall be measured in sqm for payment. The cost aluminium extruded basic frame work shall be paid seperately under the specified item.)

od251446/2021_2022 Providing and fixing powder coated fully glazed two track two paneled sliding windows made of powder coated aluminium extruded architectural sections of 27mm series frames 45x45mm and 65x27.1 mm shutter frame all having wall thickness of 1.4 ± 0.2 mm and glazing with 5mm thick approved clear/reflective type glass including necessary glazing bead of appropriate dimension, handle, lock, EPDM/Neoprene gasket, screws, fasteners etc. as per enclosed technical specifications, drawings and/or directions of Engineer in charge. The gap in between aluminium frame and adjacent rcc/brick/stone work shall be sealed by weather silicon sealant over backer rod of approved quality. (Out to out area of the window frame shall be measured in sqm for payment.)

od251519/2021_2022 Providing and fixing powder coated fully glazed three track three paneled sliding windows made of powder coated aluminium extruded architectural sections of 27mm series frames 75x45mm and 65x27.1 mm shutter frame all having wall thickness of 1.4 ± 0.2 mm and glazing with 5mm thick approved reflective type glass including necessory glazing bead of appropriate dimension, handle, lock, EPDMgasket, screws, fastners etc. as per enclosed technical specifications and drawings. The gap (if any) in between aluminium frame and adjacent rcc/brick/stone work shall be sealed by weather silicon sealant over backer rod of approved quality. (t shall be measured out to out of the window frame work in square meter for payment.)

Providing and fixing aluminium powder coated 27mm series flyproof sliding track panel to Three/Two track windows instead of glazing panel. The fly proof mesh shall be stainless steel 304 grade wire gauge with average width of aperture 1.4mm in both directions and wire of diameter 0.5mm shall be fixed to the shutter frame using EPDM/Neoprene gasket including screws, hinges, fastners, nuts, bolts etc. complete. (It shall be measured out to out of the shutter frame in square meter for payment. The basic frame of 2/3 track sliding window including the glazing panel shall be paid in the respective item. Area of glazing panel replaced by the flyproof mesh panel in the sliding window will be deducted from the respective item.)

od251577/2021_2022 Providing and fixing casement window/side openable windows made of powder coated aluminium extruded architectural hollow sections of 40mm super series size frames, sash, mullions(where ever required) all having wall thickness of 1.5 ± 0.1 mm and glazing with 5mm thick approved glass including necessary glazing bead of appropriate dimension, handle, lock, EPDM gasket, screws, stainless steel friction hinges, fasteners etc. as per enclosed technical specifications and drawings. The gap (if any) in between aluminium frame and adjacent rcc/brick/stone work shall be sealed by weather silicon sealant over backer rod of approved quality. (t shall be measured out to out of the window frame work in square meter for payment.)

od251625/2021_2022 Providing and fixing partially glazed and partially louvered ventilator using powder coated aluminium extruded louver profile(min 0.400kg/m) and 5mm thick glass fixed to the outer frame in altenate grids of size approximately 600mm made of powder coated aluminium extruded frame of size 63.5x38.1x2mm including EPDM/Neoprene gasket, screws, hinges, fastners, nuts, bolts etc. complete. as per the drawing or directions of engineer in charge. (It shall be measured out to out of the outer frame work in square meter for payment. The cost of aluminium extruded outer frame work shall also includes in this item)

od251858/2021_2022 Providing and fixing louvered ventilator made of 6mm thick approved glass fixed to powder coated aluminium extruded frame of size 63.5x38.1x2mm including fastners, screws etc. complete. (It shall be measured out to out of the outer frame work in square meter for payment. The cost of aluminium extruded outer frame work shall also includes in this item)

od251866/2021_2022 Providing and fixing panelled sliding doors made of powder coated aluminium extruded architectural sections of specified size with shutter comprising of section having bottom rail of size 100mmx44.5mmx1.85 mm thick, lock rail of size 100 mm x 44.45 mm x 2 mm thick, top rails 50mm x 44.45 mm x 1.50 mm thick , vertical style 50mm x 44.45 mm x 1.80 mm thick and appropriate sliding system. The top and bottom rail shall be reinforced with 8/10mm dia rods. The door shall be panelled with 6mm thick Thomoson multiwood panel at bottom and 5mm thick approved glass at top including handle, EPDM gasket, screws, fastners, rollers, lock & key, door stopper etc. as per the drawing and specifications. (Area of door opening shall be measured in sqm for payment.)

od251870/2021_2022 Providing and fixing fully glazed door with 12mm thick toughened glass partially fixed and partially openable as per the drawing and specifications including providing and fixing top & bottom pivot & spring type fixing arrangement, frosted stickers, required door fittings such as SS door handle, stopper, locking system etc. complete as per the direction of Engineer in charge. (Area of door opening shall be measured in sqm for payment.)

od251874/2021_2022 Providing and fixing panelled side hung doors made of powder coated aluminium extruded architectural sections of specified size with shutter comprising of section having bottom rail of size 100mmx44.5mmx1.85 mm thick, lock rail of size 100 mm x 44.45 mm x 2 mm thick, top rails 50mm x 44.45 mm x 1.50 mm thick , vertical style 50mm x 44.45 mm x 1.80 mm thick. The top and bottom rail shall be reinforced with 8/10mm dia rods. The door shall be panelled with 6mm thick Thomoson multiwood panel at bottom and 5mm thick approved glass at top including handle, EPDM gasket, screws, fastners, lock & key, door stopper etc. as per the drawing and specifications. (Area of door opening shall be measured in sqm for payment.)

od251913/2021_2022 Providing and fixing fully paneled side hung doors made of powder coated aluminium extruded architectural sections of specified size with shutter comprising of section having bottom rail of size 100mmx44.5mmx1.85 mm thick, lock rail of size 100 mm x 44.45 mm x 2 mm thick, top rails 50mm x 44.45 mm x 1.50 mm thick , vertical style 50mm x 44.45 mm x 1.80 mm thick. The top and bottom rail shall be reinforced with 8/10mm dia rods. The door shall be panelled with 6mm thick Thomoson multiwood panel including handle, EPDM gasket, screws, fastners, rollers, lock & key, door stopper etc. as per the drawing/directions of Engineer in charge and specifications. (Area of door opening shall be measured in sqm for payment.)

od251914/2021_2022 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-incharge. With stainless steel cover plate minimum 1.25 mm thickness.

od253147/2021_2022 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. (basic rate Rs.1500/-)

od251915/2021_2022 Providing and fixing of ACP cladding/ACP box using aluminium extruded sections of size 25.4x25.4x1.2mm(0.308kg/m) box frame for fixing 4mm thick FR grade aluminum composite panel (0.5mm aluminium coil thickness) of approved make and colour including stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant etc. The ACP shall be securaly fixing the basic frame work to the properly designed structurals with adequate anchor fastners. Fischer/Hilti make nuts and bolts,screws etc as per technical specifications and drawings. (Exposed area of the ACP shall be measured in sqm for payment. The cost of supporting aluminium frame work shall also includes in this item.)

od251916/2021_2022 Providing and fixing aluminium composite panel border 100mm to 150mm size made of 4mm thick FR grade aluminum composite panel (0.5mm aluminium coil thickness) of approved make and colour fixed to the basic frame work using suitable aluminium extruded sections with stainless steel screws, cleats, sealant etc. complete. (It shall be measured in running meter)

od251964/2021_2022 Providing and fixing aluminium composite panel ceiling and fascia using aluminium extruded architectural sections of size 25.4x25.4x1.2mm(0.308kg/m) to form grids of size 600x600mm and fixing 4mm thick FR grade aluminum composite panel (0.5mm aluminium coil thickness) of approved make and colour to the frame work using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant etc. The basic frame work shall be propoerly hung/fixed on the existing roof structurals using aluminium extruded angles/square tubes at proper intervals. ( The exposed area shall be measured in sqm for payment. The acp bent up or turned back to the frame shall not be paid.)

od252062/2021_2022 Providing and fixing 16-18 gauge SS sheet cladding using SS sheet of grade AISI 304. The sheet shall be properly fixed to the aluminium partition/masonry wall upto specified height including cutting, bending, jointing, riveting/welding etc. complete as per the directions of Engineer in charge. (The measured area converted to weight shall be considered for payment.)

od252068/2021_2022 Providing and fixing MS structural steel support/cross members/frames for fixing structural glazing /partition/ceiling etc including welding, bolting with all necessory nuts, bolts, anchor fastners. Charges including painting with two coat of anticorrossive Yellow zinc chromate primer and 2 coat of synthetic enamel paint etc. complete as per the directions of engineer in charge. (The length converted to weight as per IS steel table shall be considered for payment.)

10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

od252330/2021_2022 Providing and fixing SS 304 grade angle in corners of steps, column etc to act as nosing with lugs of SS 304 grade flats including cutting, welding, grinding, buffing etc. and fixing to concrete/masonry/tile with strong adhesives like Araldite or equivalent. (The measured length converted to weight shall be considered for payment.)

od252481/2021_2022 Providing and fixing SS Pipe (Grade 304) support for fixing production block main entrance canopy structure including welding, bolting with all necessary nuts, bolts, plates, anchor fasteners. complete as per the directions of engineer in charge. (The measured length converted to weight shall be considered for payment.)

JOSEPH GEORGE M