Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.2 Craccepted-aoc | ₹1.2 Cr | accepted-aoc |
Tender Value
₹1.1 Cr
EMD Value
₹2.0 L
Closing Date
24 Jan 2026, 9:30 pmClosed
Karnataka Neeravari Nigam Limited
Sri Deepak Kamble TA
Removing damaged Gate, fabrication & erection of new gate in 22nd bay of Hipparagi barrage. (Gate No 22)
KNNL/2025-26/GH/WORK_INDENT3896
KNNL/2025-26/GH/WORK_INDENT3896
Open
Gates/Hoists and Allied Works
Two Tender Document System(Two Cover)
KNNL Division HBC Div Athani
18 documents required · 18 mandatory
A valid copy of the KPWD Class III and Above with validity.
Valid Employees Provident Fund Registration Certificate with EPF paid challan for the month previous to the month in which tender is called through e-procurement portal
The tenderer should complete the provisions of the contract labour (Regulation and Abolition Act 1970) and the corresponding Karnataka Rules 1974).
Work Done : To qualify for award of this contract each tenderer in his or her in the last 5 years (2020-21 to 2024-25) should have satisfactorily completed (at least 90% of the contract value of on going works) as prime contractor at least one similar nature of work of value not less than Rs. 65.13 Lakhs (usually not less than 50% of the amount put to tender under this contract.) Work done Certificate issued by an Officer not below the rank of Executive Engineer of the concerned division (The cost of completed work of the previous year shall be updated to 2024-25 by giving weightage of 10% per year to bring it to the price level of financial year in which the tenders are invited). Certificates should be obtained from the Officer not below the rank of Executive Engineer. Note: 1) Similar nature of work means Bidder should done the work in Design, Fabrication, Erection and Commissioning of Vertical/radial Spillway Crest Gate for /Dam/ Barrage including gantry crane work. since last 5 years (Any one year) as above mentioned years.
Each tenderer in his or her in the last 5 years years (2020-21 to 2024-25) should have satisfactorily Executed in any one year the following minimum quantities of work Fabrication, Erection and Commissioning of Vertical/radial spillway crest Gates of Size not less than 13.72Mx8.23M ) or Area not less than112.92Sq.Mt 36.45 Tonne
Availability of key personnel with adequate experience as required should be indicated based on the requirement for the work to be executed. 1.Graduate Engineers (Mechanical) -02 No, 2.Diploma Engineers (Mechanical)-03 No
Equipments Required during Execution of works (Own or Hired) Machinery 1.Welding Machine(Big) 5 Nos, 2. Sandblasting Equipment 5 Nos., 3. Tool kit(big) 5 Nos, Hydraulic Cranes (50Tonne) 2Nos. 4. Hydraulic Jacks 5 Nos, 5. Hydraulic cranes (30Tonne) 2Nos.
GST Registration certificate/ Pan Card.
Latest copy of the Income Tax return for financial year 2024-25 (Assesment year 2025-26).
financial turnover The intending bidder should have achieved a minimum financial turnover of Rs 260.52 Lakhs, in at least two financial years during the last 5 years reckoned back from 2023-24 (turnover during (2020-21 to 20224-25 only will be considered) duly updating the financial turnover at 10% per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with mentioned compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished. (If UID Number not mentioned treated as incomplete and rejected)
Liquid Assets and or availability of credit facilities of not less than Rs. 130.40 Lakhs (Due to Emergency Work and Tender period is given only 15 Days Liquid Assest consider as a total Amount work )(Credit lines/ letters of credit / certificate from banks) for meeting the fund requirements etc., (usually the equivalent of the estimated cash flow for 3 months in peak construction period).
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AXNX1.5- B ) Where A Maximum value of civil engineering works executed in any one year during the last five years(2019-20 to 2023-24) (updated to 2023-24price level) taking into account the completed as well as works in progress.N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023-24price level, of existing commitments and on-going works to be completed during the next 0.50 years (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Scanned signature of the bidder along with phone number / authorised representative in case of a firm or company, to be attached while uploading the bid documents. Also in case of authorised representative, scanned copy of power of attorney should be uploaded & the original should be produced at the time of opening of tender
If any of the dates mentioned above happened to be a general holiday, the next working day holds good.
Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.
₹2,770
₹2.0 L
24 Jan 2026
17 Jan 2026
27 Jan 2026
21 Jan 2026
21 Jan 2026
Removing damaged Gate, fabrication & erection of new gate in 22nd bay of Hipparagi barrage. (Gate No 22)
Cutting, removing of Service gates size 13.72m x 8.23m (Gate No.22) including cost of all materials, machinery, labour, transportation, gas cutting, cleaning, removing from respective bays and storing...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting brackets,...
EMBEDDED PARTS.
Resetting and alignment of the crest gate embedded parts for smooth operation, including cost of materials replacement of wornout materials, lubrication, cost of labour, hire charges o...
HOIST MECHANISM
a) Check condition of wire rope. b) Check equalizer plate assembly and sockets. c) Check tension in wire rope. d) Check lifting bracket pin. e) Check wirre rope is properly fastened to...
Providing & supplying Wire Rope ( confoming to IS-2266 ) for vertical crest gates of barrages with including cost labour, transportation etc., complete with as per approved drawing & dimension.
Providing & supplying Wire Rope ( confoming to IS-2266 ) for vertical crest gates of barrages with including cost labour, transportation etc., complete with as per approved drawing & dimension.
Providing and applying cardium compound approved quality to wire ropes of hoist/gantry cranes at part of manual maintenance including cost of all materials, machinery, labour with all other ancillary ...
Providing and supply of roller assembly including bearing of 22319CC straight bore of maake (SKF / NSK / ZKL / FAG ) with pressed steel gauge minimum static caapacity of 670000N, dynamic capacity 5180...
Inserting and removing stoplog elements in the bay with the help of existing Gantry crane including labour etc complete as per the direction of the Engineer incharge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
tender Notifi.pdf
Instructions to Tenderers • 0.59 MB
DTP1.doc
Tender Document • 1.08 MB
est.xlsx
Others - estimate • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .