RECONSTRUCTION OF KENDRIYA VIDYALAYA 1 BUILDING AT AF STN JAMNAGAR

Amount

NOTE: Schedule ‘A’ Part I to XI are under Ser No. 2.00 to 13.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for Building / Structures as listed in Sch `A’ Part I.

Lump sum price worked out for Excavation & Earthwork as listed in Sch `A’ Part II

Lump sum price worked out for Internal Water Supply as listed in Sch `A’ Part III

Lump sum price worked out for Internal Electrification as listed in Sch `A’ Part IV

Lump sum price worked out for Fire Fighting Equipment as listed in Sch 'A’ Part V

Lump sum price worked out for Road/Path/Hard Standing as listed in Sch 'A’ Part VI

Lump sum price worked out for Sewage Disposal as listed in Sch `A’ Part VII

Lump sum price worked out for Area Drainage as listed in Sch `A’ Part VIII

Lump sum price worked out for External Water Supply as listed in Sch 'A’ Part IX

Lump sum price worked out for External Electric Supply as listed in Sch `A’ Part X

Lump sum price worked out for Demolition and Dismantling as listed in Sch `A’ Part XI

Lump sum price worked out for Compound Wall and Gate as listed in Sch `A’ Part XII

SCHEDULE `A' PART-XIII MISCELLANEOUS ITEMS OF WORK (Note for items 14 to 51. The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

Supply & Fixing ceiling fan 1200 mm sweep complete with blade, canopy and down rod and connecting up to and including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose to connector block all as specified and directed.

S&F Exhust fan metallic type 300 mm sweep 240 V AC single phase complete with aluminum louvers and shutters of any sweep including provision of flexible three core copper conductor cable of 23/ 0.0076 up to ceiling rose and grouting 04 Nos full threaded bolts and nuts etc all as specified and directed.

S & F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 22 Watt, aluminum channel housing & diffuser of length 1200mm (approx) with all accessories 5700K rated CCT energy efficient with lumen efficiency not less than 110 lumen/watt, PF 0.80 IP 20 fixing arrangement internally pre-wired fixed in position & connecting complete all as specified and directed by Engr-in-Charge.

S&F LED Building Security light luminaire led 25 W 5700K with aesthetically designed sheet aluminium housing and UV stabilised acrylic cover with lumen efficiency not less than 110 lumen/watt, PF 0.8 IP 66 complete with lamp and internal connection including bracket made of 40 mm dia GI pipe light grade fixed with MS Clamp of suitable size grouted on wall with suitable nos of screws complete all as specified & directed by EIC.

M&L for MCB Single pole & neutral 230 volt C curve 10 KA, 40 Amps capacity IP 20 complete all as specified and directed.

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed.

M&L for MCB TPN,100 Amp 415 volt B curve 35 KA, IP 20 complete all as specified and directed.

M&L for MCB TPN,40 Amp 415 volt B curve 10 KA, complete all as specified and directed.

M&L for MCB TPN 32 Amp 415 volt B curve 10 KA, complete all as specified and directed.

S&F angle holder penta type 6A ivory plastic ring batton holder with LED bulb 7W, B22 type(cool day light) complete all as specified and directed.

Supply & Fixing Bracket made out of GI light grade pipe of 40/35 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 5mm and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified & directed.

S&F LED Street Light fitting 90 watt system efficiency not less than 100 lumen / watt, IP66 protection,5700K consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws complete all as specified and as directed.

S&F LED Light fitting 25watt building security light, system efficiency not less than 100 lumen / watt, IP66 protection,5700K consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws complete all as specified and as directed.

Supply, installation, testing and commissioning LT panel Outdoor type confirming to IS 8623 Part I(one),CPRI approved, totally enclosed weather and vermin proof suitably ventilated for 3 phase , 4 wire 415 Volts, 50Hz, AC supply, outer shell shall be made out of 3.15mm thick CRCA sheet & MS angle section of suitable size for frame , factory fabricated , compartmentalized inner shell shall be made of out of 2.0mm thick CRCA sheet for control gear. Front and back door opening with locking arrangement at front. Protection of enclosure IP 56 as per IS-2147 of 1962 with pre- treatment through 7 tank hot chemical process prior to powder coating and powder coated with minimum 50-70 micron of approved colour. The bottom of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size. EPDM gasket of appropriate shape and size provided at all joints, doors and covers including suitable size angle iron/flat iron frame work / support required with four legs 60 cm long using angle iron 60x60x6mm , air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs,legs grouted in PCC 1:2:4 and making good disturbed surface complete and comprising of the following :-

A. (i)TPN Aluminium electrolytic grade bus bar of capacity 160 Amps for phases & 100 Amps for neutral.and auxillary busbar to support main busbar. duly supported on SMC/DMC, busbar supports and insulated with colour coded heat shrinkable sleeve. (ii) Digital multifunction meter(V,A,KW,KWH),415V AC alongwith C.T’s of suitable ratio (set of three),class 1.0, complete. (iii) Indication lamps LED type (RYB) = 01 Set of three. CTs 500/5A class 1.0,15VA(Cast Resin) for metering-03 nos . (iv) Internal wiring, with suitable size of FRLS copper conductor cable. B. INCOMER:(i)MCCB 160 Amp 4 pole,35 KA ,Ics=100% Icu, with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 01nos

C.OUTGOING : (i) MCCB 100 amp 4 pole,25 KA ,Ics=100% Icu, with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 01nos (iii)MCCB 63 amp 4 pole,25 KA ,Ics=100% Icu, with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 02nos (iv) MCB SPN 63 amp,10KA, C Curve -02 nos complete all as speified and as directed by Engr-in-charge. Note:(i) LT Panel shall be CPRI approved (ii)Contractor shall submit the following Test report i.e. IP Test Report and verification of short circuit withstand test report issued by CPRI in respect of LT Panel. (iii) Contractor shall submit drawing for approval prior to place order.

Supply, installation , testing and commissioning LT panel outdoor type confirming to IS 8623 Part I(one) ,CPRI approval , totally enclosed weather and vermin proof suitably ventilated for 3 phase , 4 wire 415 Volts, 50Hz, AC supply, outer shell shall be made out of 3.15mm thick CRCA sheet & MS angle section of suitable size for frame , factory fabricated , compartmentalized inner shell shall be made of out of 2.0mm thick CRCA sheet for control gear. Front and back door opening with locking arrangement at front. Protection of enclosure IP 56 as per IS-2147 of 1962 with pre- treatment through 7 tank hot chemical process prior to powder coating and powder coated with minimum 50-70 micron of approved colour. The bottom of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size. EPDM gasket of appropriate shape and size provided at all joints, doors and covers including suitable size angle iron/flat iron frame work / support required with four legs 60 cm long using angle iron 60x60x6mm , air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs,legs grouted in PCC 1:2:4 and making good disturbed surface complete and comprising of the following :-

A. (i)TPN Aluminium electrolytic grade bus bar of capacity 100 Amps for phases & 50 Amps for neutral.and auxillary busbar to support main busbar. duly supported on SMC/DMC, busbar supports and insulated with colour coded heat shrinkable sleeve. (ii) Digital multifunction meter(V,A,KW,KWH),415V AC alongwith C.T’s of suitable ratio (set of three),class 1.0, complete. (iii) Indication lamps LED type (RYB) = 01 Set of three. CTs 500/5A class 1.0,15VA(Cast Resin) for metering-03 nos . (iv) Internal wiring, with suitable size of FRLS copper conductor cable B. INCOMER:(i)MCCB 100 Amp 4 pole,25 KA ,Ics=100% Icu, with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 01nos C.OUTGOING : (i) MCCB 80 amp,04 pole, 25KA , lcs=100% lcu, with fixed magnetic and adjustable thermal release adjustable overload 80-100% and adjustable short ckt 5 to 10 in setting complete with phase separator -03 nos (ii) MCB SPN 32 amp,415 volts,10KA, B Curve -02 nos complete all as speified and as directed by Engr-in-charge. Note:(i) LT Panel shall be CPRI approved (ii)Contractor shall submit the following Test report i.e. IP Test Report and verification of short circuit withstand test report issued by CPRI in respect of LT Panel. (iii) Contractor shall submit drawing for approval prior to place order.

Supply and fixing Junction box of size 200mm x 140mm x 96mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable / wire complete comprising with the followings :- (a) Bus bar with two aluminium strips, 63 Amps cap. insulated with insulators, incl colour coding , including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps, - 01 No (c) clamp made out of 25mm x 3mm flat iron duly welded with nuts & bolts complete all as specified and directed.

Supply and fixing / passing through pipe from junction box to street light ,1.5sqmm 1100 volts grade heavy duty cable with PVC insulated multistarnded copper conductor cableflame retardant low smoke & halogen confirming to 1100volt confirming to IS 694.

Supply , install & testing of outdoor type Ring main unit ( Type :V+M) 11KV,630 Amp and 20KA Extensible type motor operated SF6 insulated with, O/C, E/F relay and necessary PCC foundation work as recommended by manufacture along with bottom cable entry and front cable termination with following specification:- (a) one incoming Vaccum circuit breaker with Air insulated metering module A01 Incoming Vacuum Circuit Breaker Module Type V Safe Plus V is a Motorised Vacuum circuit breaker module with vacuum circuit breaker, three position isolator/ earthing switch, bus bars, interlocking, earth bar and stored spring energy mechanism (A-mech.).Safe Plus type V: Vacuum circuit breaker 12kV, 630A - 01 No Stored energy mech. for motor operation - 01 No Control voltage, motor operation 24 V DC - 01 No Self Powered OC+EF Protection Relay type ADR 141 S - 01 No Set of 03nos. Ring Core Protection Dual CTs of ratio 100/1 A,2.5VA, 5P10- 01No set of 03nos. Ring Core Metering Dual CTs of ratio 100/1 A , 2.5VA, Class 1.0 - 01 No Capacitive voltage indication fixed type VPIS 6-12 kV - 01 No Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 No A02 Metering Module Type M Safe Plus M is an air insulated metering module. Safe Plus type M: Air insulated metering module 12kV, 630A (IAC AF 16kA 1 s) - 01 No Set of 03nos.

Single-phase potential transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 with HRC fuses for protection on primary side and MCBs for protection on secondary side.- 01 No Space Heater (230VAC)- 01 No Low Voltage Box inside the metering enclosure for mounting:- 01 No • Multifunction Meter for each feeder • CSPC make Under/Over Voltage Relay • 2x12VDC Battery+Charger scheme • R-Y-B Phase Indication lamp Additional equipment delivered separately or mounted in respective panel. Set of Coupling busbars along with suitable coupling kit.- 01 No. Manometer- 01 No

Supply and fix CI cable route indicator 100mm dia , 5mm thick duly engraved with " LT 1100 volts" having CI rod 10mm dia, 50 to 70 cm long, duly welded to round plate complete with PCC 1:4:8 all as specified and as directed by Engr-in-charge

S&F Bronze gate valve class-2 for 50mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.

S&F stainless steel bourdon type pressure gauge dial type 0 -25 Kg/cm2 range with a stainless steel body complete including all necessary GI pipe connection fittings / cutting / jointing all as specified and directed by Engr In charge.

S & F Cast iron foot valve confirming to IS:4038 of size100mm bore with rubber seating, flanged end complete incl taking out old unserviceable as specified and as directed by Engr-in-Charge.

Material and labour for construction of valve chamber of size 1200 x 1200x 1000 mm deep dimensions (Over all internal dimension) for sluice valve etc. with PCC foundation, PCC solid block masonry walls, Plastering, PCC Coping, white washing, mild steel chamber cover, painting to chamber cover including Excavation and earth work in any type of soil strata complete all as specified below:-Valve chamber shall be provided with the following specifications:- (i) Cement concrete for foundation (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick extended up to 150 mm beyond the outer face of block masonry.(ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks , setting in CM 1:6 complete. (iii) Internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth.(iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall.(v) Entire plastered surfaces shall be treated with 3 coat of white wash.(vi) Chamber cover shall be of 3 mm thick MS sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel surface shall be painted with two coats of synthetic enamel paint of first quality over one coat of red oxide primer.

Supply ,installation,testing and commissioning of monobloc pump set totally enclosed fan cooled(TEFC)suitable for 3 phase 415 volts 50 Hz AC supply suitable for clear water application with liquid temperature between 15°C to 40°C with CED coated cast iron impellers with CS shaft and shaft sleeves having capacity of 1350 LPM to lift clear water at head 15.0meter, nominal speed as recommended by the manufacturer of pumping set conforming to IS- 5120. The efficiency of pump shall be minimum 70%.The pump shall be directly coupled with squirrel cage induction motor of suitable capacity or KW as per recommendation of the manufacturer confirming to IS12615(2011) and IS/IEC 60034-1 suitable for operation on AC three phase 415V ± 10%,50 HZ,class B insulation ,Duty: S1, IP 44, mounted on common base frame .

Note:(a)The assembling and installation of Pumping set shall be done by the manufacturer of the pump itself and not by any autorised dealer/workshop/rep/sister concern etc. (b)Base frame will be fixed on new PCC platform. Rate quoted shall be deemed to be included for the following: (i) Any Addition / Alteration of suction 80mm dia pipe and delivery side pipe for water connection etc. (ii) Installation of strainer on suction side of suitable dia to match with suction pipe (iii) Arrangement of GI Pipe 20mm bore (iv) Valve for release of air. (v) Cost of construction of new PCC Platform suitable size or as directed by Engr-in-Charge.

Supply and Fix pump cable , PVC insulated ,PVC sheathed , multi stranded copper conductor cable 1100 volts grade of size 4 sqmm 3 core and connecting complete including provision of PVC conduit heavy duty 25mm dia complete with fixing arrangement and all other accessories complete all as speified and as directed by Engr-in-charge.

M&L for frbrication and erection of Fire point using angle iron of size 50x50x5mm and MS sheet 2mm thick including welding, PCC complex and provision for hanging of bucket-03 nos complete all as shown on TD drg No. CEAA/TD/148 Sheet No. 01/01 dated 01 Dec 2004 and as directed by Engr-in-Charge.

Supply only MS Bucket for fire stand posts complete all as specified and as directed by Engr-in-Charge.

Supply and fix FIRE ASSEMBLY POINT board on angle iron frame of size 40x40x5mm complete all as specified and as directed by Engr-in-Charge.

Supply and fix HFC227ea Clean Agent Based Portable (Stored Pressure Type) Fire Extinguishers 4.0Kg wall mounted suitable for fire fight class A, B and elecrticity started fires complete all as specified and directed by Engg-in-Charge.

Supply and Fix Bronze gate valve class-1 for 25mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778, complete all as specified and directed.

Supply and fix direct on line starter in sheet metal enclosure type MN with single phase protection suitable for AC-3 duty motor rating , 415V, 50 Hz, 3 ph with maximum motor output 7.5KW(10 HP) with relay 9-15A complete all as specifed and as directed by Engr -in- Charge.

M&L for preparation of plastered surface of walls including plaster/cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete and as directed.

Supply only Galvanized steel Punched type concentrina coil of dia 730mm dia ( dia of coil when unstretched with nos of circles 50, with weight 11.00Kg/Coil and recommended and average coverage area is 6Rmt/Coil) all as specified and directed.

Fixing only Galvanized steel Punched type concentrina coil of dia 730mm dia ( dia of coil when unstretched with nos of circles 50, with weight 11.00Kg/Coil and recommended and average coverage area is 6Rmt/Coil) and fixed to angle iron post/strutas with 3.15mm dia GI MS plain wire (4 kg per RM) all as specified and directed.

Construction of Steel Gate 5.00m wide and 2.1m height as per TD Drg No CEAA/TD/70 of Sheet No 1.2 to 2.2

Supply & Fix 15mm nominal size angle cocks (ISI marked) cast copper alloy chromium plated screwed down for CPVC pipe with brass union and fixed complete all as specified and directed.

Material & labour for moorum/red bajri filling in floors or pavings,laid in layers n exc 15cm thick spread levelled and rammed including watering.complete all as specified and as directed.

Supply & Fix Cast iron Air release valve single acting, kinetic type non cloging & self sealing balls for trouble free operation, totally tamper proof ideally sited for turbid or clear water confirming to IS 14845/AWWA pressure rating PN 1.6 and jointing materials like gaskets, flamges, nuts and bolts and washer etc complete for fixing arrangement in water pipe mains of size 25mm dia fitted with 1.5m long 25mm dia GI pipe for pressure gauge and 1.0m long dia GI pipe for inlet connection complete all as specified and directed.

Sch of credit Rs 9,59,400.00

M/s SK Traders