REPAIR/REPLACEMENT OF UNSERVICEABLE WATER SUPPLY DISTRIBUTION NETWORK IN MARRIED/OTM ACCN AT SHAITAN SINGH, HAMID BAGH OTM ACCN, RATANADA PUMP HOUSE AREA IN ARMY AREA JODHPUR AS PER CPP SER NO 04

Excavation in trenches not exc 1.5m width and not exc 1.5 m in depth and getting out for laying of pipes etc in soft/loose soil .

Returning filling in including spreading levelling watering and ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated surplus soil to a distance not exceeding 50M where directed and at a level not exceeding 1.5 M above the starting point.

M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge of following sizes of 100 mm bore.

M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge of following 150 mm bore.

M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge of following of 200 mm bore.

M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge of following of 300mm bore.

Supply and lay DI pipe centrifugally cast of class K-9 with spigot and socket ends/flanged end suitable for tyton joints/flanged joints including rubber gasket/rubber ring and other accessories like nut-bolts etc for the following sizes.: 100 mm bore.

Supply and lay DI pipe centrifugally cast of class K-9 with spigot and socket ends/flanged end suitable for tyton joints/flanged joints including rubber gasket/rubber ring and other accessories like nut-bolts etc for the following sizes: 150 mm bore.

Supply and lay DI pipe centrifugally cast of class K-9 with spigot and socket ends/flanged end suitable for tyton joints/flanged joints including rubber gasket/rubber ring and other accessories like nut-bolts etc for the following sizes : 200 mm bore.

Supply and lay DI pipe centrifugally cast of class K-9 with spigot and socket ends/flanged end suitable for tyton joints/flanged joints including rubber gasket/rubber ring and other accessories like nut-bolts etc for the following sizes : 300 mm bore.

Material and labour for fixing DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes :- Upto 150 mm bore .

Material and labour for fixing DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes :-Above 150 mm bore.

Supply and Fixing for DI sluice valve of following sizes of bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed size - 80 mm bore..

Supply and Fixing for DI sluice valve of following sizes of bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed. size- 100 mm bore

Supply and Fixing for DI sluice valve of following sizes of bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed. size -150 mm bore

Supply and Fixing for DI sluice valve of following sizes of bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed. size - 200 mm bore

Supply and Fixing for DI sluice valve of following sizes of bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed. size - 250 mm bore

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-80 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-100 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-150 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-200 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-250 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. 250 mm bore.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-300 mm bore Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:-350 /375 mm bore Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-80 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. )

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-100 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-150 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-200 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-250 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-300 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed for the following sizes:-350 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- 100 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- 150 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- 200 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- 250 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- 300 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:-15mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:-20mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:- 25mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:-40mm bore

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:-50mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:-80mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:- 100mm bore.

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 15 mm bore .

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 20 mm bore .

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 25 mm bore .

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 40 mm bore.

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 50 mm bore .

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 80 mm bore .

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for the following bores:- 100 mm bore.

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- size 15 mm dia .

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- size 20 mm dia .

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- 25 mm dia .

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- 50 mm dia .

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- 80 mm dia .

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate with PCC blocks 20 cm thick wall built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron (50x50x6mm) of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:-1050 x 1200 x 1000mm

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate with PCC blocks 20 cm thick wall built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron (50x50x6mm) of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:-900 x 600 x 1000mm

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate with PCC blocks 20 cm thick wall built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron (50x50x6mm) of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:- 450 x 450 x 600mm

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate with PCC blocks 20 cm thick wall built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron (50x50x6mm) of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:- 2500 x 2200 x 1500mm and wall thickness of 30 cm PCC blocks

Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts for connection from existing 50-200 mm bore CI/DI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site.

S&F in replacement of u/s PVC float valve,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20 mm bore.

S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25 mm bore.

Material and labour for laying of pipe under road crossing of size 50 mm to 200 mm by trenchless technology by aguring or mechnical means in any type of soil.

M & L for road cutting and repairing the same with road patch material width upto 75 cm all as specified and directed by EIC. Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a penalty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in support of pipes or foundation of pump complete all as directed.

M&L 15 mm thick cement plaster in cum (1:6) on brick/stone/PCC surface fair and even complete all as directed

S&F CI foot valve threaded/flanged, ball type as required of following sizes :- 50 mm bore

S&F CI foot valve threaded/flanged, ball type as required of following sizes :- 80 mm bore

S&F CI foot valve threaded/flanged, ball type as required of following sizes :- 100 mm bore

S&F CI foot valve threaded/flanged, ball type as required of following sizes :- 150 mm bore

S&F CI foot valve threaded/flanged, ball type as required of following sizes :-200 mm bore

S&F CI Non Return Valve PN 1.6 of following sizes 150 mm bore.

S&F CI Non Return Valve PN 1.6 of following sizes 200 mm bore .

S&F CI Non Return Valve PN 1.6 of following sizes 250 mm bore.

S&F DI air release valve with two air outlets, 50mm dia bore and fixing up in cast iron/ DI water supply mains

S&F DI air release valve with two air outlets, 80mm dia bore and fixing up in cast iron/ DI water supply mains

Suppy & fix in replacement of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top, 100% UV Stabilised Tank and threaded Lid, mutiple layered ) of capacity 5000 Ltr hoisted and fixed in position including connecting with the existing piping network all as specified and directed by Engr-in-Charge.

Taking up raising/ delivery DI water mains 100mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket with nut bolts & washers of any size and relaying the same with using new gasket / tyton joint complete all as specified and as directed.

Supply and fixing for manual gear operated Butterfly valve (ISI Marked) size 150 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed.

Supply and fixing for manual gear operated Butterfly valve (ISI Marked) size 200 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed.

M&L for painting of Valve Chambar plaster portion with cement base and steel portion with synthetic enamel paint of any size

Taking down carefully spindle of cast iron sluice valve of size 80mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 80mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

Taking down carefully spindle of cast iron sluice valve of size 100 mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 100mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

Taking down carefully spindle of cast iron sluice valve of size 150 mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 150mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

Taking down carefully spindle of cast iron sluice valve of size 200mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 200 mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

Taking down carefully spindle of cast iron sluice valve of size 250 mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 250mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

Taking down carefully spindle of cast iron sluice valve of size 300 mm bore dismantling parts and reassembling by replacement of new brass spindle suitable for 300mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site.

M&L for painting of sluice valve/NRV upto 100mm dia as per existing colour complete all as specified.

M&L for painting of sluice valve/NRV 150/200mm dia as per existing colour complete all as specified.

Supply Low volatge hand gloves are insulating rubber gloves designed for live work , with a max operating voltage of 500 V-1000 V AC. As per Indian Standard.

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.375/400 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.350 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.300 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.250 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor. 200 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.150 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.100 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor. 80 mm bore

Taking out existing inerlocking tile carefully and relaying same as per exiting including all material. Note :- During execution of the work if any damages like tile, PCC, cement etc contractor will repleced same with new without extra charges. Rate of Excavation and earth work returning filling, leveling and removing shall be deemed to be included in the rate quoted by contractor. Note - The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

Please Enable Macros to View BoQ information