15TH FINANCE COMMISSION GRANT 2020-21 (1ST INSTALL.), TIDE AND UNTIDE GRANT 2020-21 (2ND INSTALL), TIDE (1ST INSTALL ) & SPECIAL GRANT 2021-22, TIDE (1ST & 2ND INSTALL) 2022-23 GRANT

Name of work : Drilling DR bore and Joint Water pipeline in Shedhi River Smashan

@ Kheda Nagar Palika, District: Kheda.

Sr. No. Discription of Work Estimated Amount

Drilling of 250 mm dia X 152 meters deep DR bore by DR rig, including

1 providing & lowering three phase pumping machinery with accessories in

at Town : Kheda Nagarpalika, Location : Shedi River Smaashan Taluka:

Kheda, District: Kheda

Providing & Laying Joint Water pipeline Shedhi River Smashan New Bore

Add 2% Contigency Charges

Total Estimated Amount Rs.

SAY TOTAL AMOUNT

SAY TOTAL AMOUNT

SB-1 (Drilling of 250 mm dia X 152 meters deep DR bore by DR rig, including

providing & lowering three phase pumping machinery with accessories in at Town :

Kheda Nagarpalika, Location : Shedi River Smaashan Taluka: Kheda, District:

ESTIMATE (Part I)

Qty. Particulars Rate Unit Amount

Drilling pilot bore hole of size 250 / 300 mm at

1 152 above village site in all starata by mud flush direct 861.35 Mtr

Reaming of 250 / 300 mm dia pilot bore hole to

size 550 mm dia. including assembling, jointing,

2 152 lowering of housing casing screen pipes & other 530.15 Mtr

assembly items with gravel packing and clay balls

Lowering of 100 mm dia drop line and 32 mm dia

Air line in the Drop line to develop each water

bearing zone came across upto the depth of tube

well ( size 250 mm dia depth up to 186 mt) for

development of tubewell by Air Compressor.

Development of bore by air compressor of

cfm / 200 psi capacity for minimum 06 hours or

up to the availability of sand free discharge

Supply of 250 mm dia (Min. 7.10 mm thickness)

ISI marked ERW M.S. Pipes confirming to

IS:4270/2001 with latest amendment. Rates are

exclusive of GST.

Supply of 250 mm dia cage type Trapezoidal

shape ('V') wire wound low carbon, Galvanized

4b screen pipe and Stainless Steel Screen

pipes,confirming IS:8110. Rates are exclusive of

36 (ii) Size: 1.0 mm Regular 2914.10 Mtr

Bore clamps made from MS plate with 03 holes

on either side with nuts & bolts of standard make

& size 900 mm x 100 mm x 16 mm suitable to

250 mm dia. Pipe

Supply of Bore plug having 100 mm height made

from M.S. Plate with 3 holes at equal distance on

circumference for nut-bolts type,locking

6 1 arrangement with nut-bolts & lock nuts of std. 1322.64 No

Make complete from 5 thick M.S. Plate(For Tap

also) suitable for 250 mm dia pipe

Supply of M.S. Bail plug having length 0.45 mtr

7 1 from medium class pipe as per I.S.S. Suitable for 1212.65 No

250 mm dia pipe

Supply of Steel bent plates suitable to ERW pipe

8 60 250 mm dia. 200 x 150 x 6 size (size in mm) 104.42 No

Supply of gravels of selected size 4 mm to 6 mm

Supply of clay balls having size of 25 mm to

11 1.5 Supply of cement 7247.30 MT

12a 1 Cement sealing 15263.95 Job

12b 1 Bottom sealing 7660.15 Job

13 1 Electrologging of pilot bore 20700.00 Job

14 1 Geohydrological ground water investigation No.

15 2 Water sample chemical analysis charges. 690.00 No.

ESTIMATE (Part II)

Qty. Particulars Rate Unit Amount

Providing submersible pump set confirming to IS

9283 working at 3 phase, 400/440 volt, 50 cs/sec

1 1 AC supply & 2900 RPM, category 8.0 with 45864.30 Set

discharge : 800 LPM @ 72.0 Mtr head with 25 HP

Providing Auto Trasnformer Starter suitable for

local & remote pump control application

consisting of Auto Transformer (vaccum

impregnated, air cooled having three (3) tappings

at 50%, 65% and 80%), incomer MCCB/MPCB,

overload relay and contractors as per Type II

2 1 coordination including digital MFM with RS 485 27917.40 No.

communication port, analogue type ammeter with

selector switch, run hour meter, required

protective relays & control accessories of A.T.S.

from 21 to 30 HP for above submersible pumpset

Providing flat PVC copper submersible cable

3 70 confirmaing to IS 694, IEC 60227/60228 of size 1 223.10 Mtr.

Providing heavy duty G. I. column pipe as per IS-

4 60 1239 with couplings , threaded at both ends of 792.35 Mtr.

size 80 mm dia.

5 1 Labour charge for fishing out submersible pump

set fallen in tube well of size 150 mm / 200 mm /

250 mm dia. including carting of required

materials, fixtures for fishing to site of work

including carting charges of the fished out

submersible pump set and accessories to the

respective departmental store including loading

6 1 Fitting control panel board including carting from Job

stores to site including making GEB power /

motor connection etc. complete with giving test 792.35

report in required format of MGVCL / UGVCL

7 1 Providing & fitting pipe type earthing having 150 Job

cm long and 25 mm dia G I pipe with coupling &

buch burried in specially prepared earth pit

complete with necessary 8 SWG G I earth wire

inclduing using charcoal / coke and salt in

required quantity.

8 1 Supply & installation of ISI mark C I double Job

flanged hand wheel / cap operated sluice valve

(PD type short body) confirming to IS 14846 of

PN 1.0 of 80 mm dia.

9 1 Supply & installation of non slam design CI Job

dobule flanged single door wing type non return /

reflux valve confirming to IS 5312 of PN 1.0 of 80 4997.90

mm size as per specifications Supply as per

10 2 Providing and fitting MS heavy duty flanges with Set

bolts, rubber packing etc. complete of 80 mm dia 220.80

Providing and fitting G. I. 90 band "C" class No.

heavy duty of 80 mm dia

12 1 Providing and fitting top and bottom set made Set

from MS pipe on one side 11 TPI threaded & on

other end TPI threaded and coupling / flange

welded of 80 mm dia

13 2 Providing and fitting MS clamps made from plate No.

with nut and bolts of std. make 450 mm x 65 mm

x 10 mm flat suitable to 80 mm dia (Mech SOR 654.47

2022-23, Section B, Page No.17, Item No. 1 - C ).

14 1 Providing bore plate made from 6 mm thick MS No.

plate suitable above 200 mm & up to 300 mm dia 453.10

15 Approved make ELCB / RCCB conforming to IS

12640 and having sensitivity of 30 mA and short

circuit withstand capacity of 6 KA and suitable for

operation on three phase and neutral 415 V

having characteristic of quick action and tripping

with all advance features and do not incoroporate

any electronic component for following maximum

1 63 Amps FP Cat I 2829.00 No.

16 20 Job work of welding of MS column pipes End

including carting of 80 mm dia

17 1 Job work of excavation, laying, jointing of delivery Job

pipe to rising main pipe with all required materials 847.55

SB-2 (Providing & Laying Joint Water pipeline Shedhi River Smashan New Bore)

Sr No Qty DESCRIPTION OF ITEM RATE PER AMOUNT

Demolition including stacking of serviceable

1 14.00 materilas and disposal of unserviceable materials 1030.81 Cmt

with all lead and lift. (i) R.C.C. work

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

2 146.00 materials and disposing off the excavated stuff 117.08 Cmt

upto 50 Meter lead.(A) Loose or soft soil

Providing and supplying in standard length !S!

mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of

rings, as per IS specification no. 4985/1988

3 270.00 including all local and central taxes, 504.85 Rmt

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

deparimenta! stores and including cost of jointing

meterial etc. complete.

Lowering, laying, fixing and jointing

PVC/uPVC/cPVC pipes and specials of following

class and diameter including cost of conveyance

from stores to site of works including cost of

labour, material, cement solvent, giving

satisfactory hydraulic testing as per ISI code

PVC fittings: 9 Providing and supplying at store or

5 site of work incl. freight, loading, unloading,

stacking, insaurance & all taxes etc. complete.

4.00 PVC Elbow (Moulded) 04. 110mm 411.70 No

5.00 PVC Couplers 10kg/cm2 (Moulded)04. 110mm 270.25 No

3.00 PVC Tee (Moulded) 9. 110x110mm 468.05 No

2.00 PVC Reducer (Moulded) 5. 140x110mm 289.80 No

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

6 143.50 layers not exceeding 20 cm. in depth 130.39 Cmt

consolidating each disposited layer by ramming