Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹2.3 L
Closing Date
29 Jun 2026, 5:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Capital Project Division No.2, Gandhinagar
Construction of new Chief Minister House Deputy Superintendent of Police office building at Minister Enclave, Gandhinagar.(Providing additional facilities in Minister Enclave, Gandhinagar)
314670
Notice No. 06 of 2026-27/02
Open
Civil - All
Gandhinagar
1 document required · 1 mandatory
₹3,600
Executive Engineer, Capital Project Division No.2, Gandhinagar
₹2.3 L
16 Jun 2026
16 Jun 2026
16 Jun 2026
29 Jun 2026
16 Jun 2026
Construction of new Chief Minister House Deputy Superintendent of Police office building at Minister Enclave,
Gandhinagar.(Providing additional facilities in Minister Enclave, Gandhinagar)
Memorandum showing items of works to be carried out
In figure Total Amount
In figure Total Amount
Item Rs. Ps. according to
Item of work but may be Unit
No. In words estimated
1 Excavation for foundation Upto 1.50 m depth including sorting out and 601.00 Cmt 123.13 One hundred twenty three
stacking of the useful materials and disposing off the excavated stuff up rupees and thirteen paise
to 50 metre lead. (A) loose or soft soil. only
2 Excavation for foundation from depth 1.50 m to 3.00 m including 422.00 Cmt 170.50 One hundred seventy
sorting out and stacking of the useful materials and disposing off the rupees and fifty paise
excavated stuff up to 50 metre lead. (B) Dense or Hard soil. only
3 Excavation for foundation from depth 3.00 m to 5.00 m including 29.00 Cmt 182.94 One hundred eighty two
sorting out and stacking of the useful materials and disposing off the rupees and ninety four
excavated stuff up to 50 metre lead. (B) Dence or hard soil. paise only
4 Filling available excavated Earth (Excluding Rock) in trench plinthside 814.00 Cmt 136.92 One hundred thirty six
of foundation etc. in layer not exceeding 20 cm in depth consolidation rupees and ninety two
each deposited layer by ramming and watering etc. complete. paise only
5 Filling in plinth with sand under floors including watering, ramming 98.00 Cmt 481.70 Four hundred eighty one
consolidating and dressing etc. complete. rupees and seventy paise
6 Filling in foundation and plinth with murrum or selected soil in layers of 95.00 Cmt 277.14 Two hundred seventy
20 cm Thickness including watering, ramming and consolidating etc. seven rupees and fourteen
complete. paise only
7 Anti-Termite System:Providing and laying of permanent piping 413.00 Smt 134.33 One hundred thirty four
technology anti-termite treatment before flooring work by installing rupees and thirty three
LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm paise only
1.D. with inbuilt pressure compensation chip every 30 cm interval in the
tube, having working pressure of 2 Kg/cm2 and release rate of
Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at
the entire periphery of the building and at internal network of building at
a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance
(adjusted as per building layout ) & Ends of loop pass through a PVC
elbow of minimum 32 mm ID at junction box of wall and floor level,
entering into a steel reinforced grooved flexible pipe of minimum
mm ID leading into junction box and the loops shall terminate in
junction boxes & test every junction during injecting chemicals for
termite control treatment. The anti termite chemical Imidacloprid 30.5%
SC mix as per IS-6313 (part III) shall be injected by the pressure pump
diluted with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @
5 Ltr/SMT. The contractor shall submit approved line plan for piping
system and junction boxes dully approved by Engineer-in-Charge with
bond of 5 year warranty.(i)Anti Termite chemical injected area
(Chemical injecting incl. labour cost)
8 Providing and laying controlled cement concrete M-150 and curing 134.00 Cmt 4049.22 Four thousand forty nine
complete including the cost of form work but excluding the cost of rupees and twenty two
reinforcement for reinforced concrete work in P.C.C below foundation paise only
footings, base of columns and mass concrete.
9 Providing and laying controlled cement concrete M-250 and curing 137.00 Cmt 4419.70 Four thousand four
complete including the cost of form work but excluding the cost of hundred nineteen rupees
reinforcement for reinforced concrete work in foundation footings, base and seventy paise only
of columns and mass concrete.
10 Providing and laying controlled cement concrete M-250 for curing 49.00 Cmt 7679.31 Seven thousand six
complete including cost of formwork but excluding the cost of hundred seventy nine
reinforcement for reinforced concrete work in Columns, pillars, posts rupees and thirty one
and struts For All Floor Level. paise only
11 Providing and lying controlled concrete M-200 and curing complete 61.00 Cmt 4656.54 Four thousand six
including cost of form work but excl. reinforcement for reinforced hundred fifty six rupees
concrete work in Grade Slabs and fifty four paise only
12 Providing and lying controlled concrete M-250 and curing complete 52.00 Cmt 6412.19 Six thousand four
including cost of form work but excl. reinforcement for reinforced hundred twelve rupees
concrete work in Slabs For All Floor Level. and nineteen paise only
13 Providing and lying controlled concrete M-250 and curing complete 72.00 Cmt 6326.90 Six thousand three
including cost of form work but excl. reinforcement for reinforced hundred twenty six
concrete work in Plinth Beam & Beams For All Floor Level. rupees and ninety paise
14 Providing and lying controlled concrete M-250 and curing complete 5.00 Cmt 7760.36 Seven thousand seven
including cost of form work but excl. reinforcement for reinforced hundred sixty rupees and
concrete work in Lintel For All Floor Level. thirty six paise only
15 Providing and lying controlled concrete M-250 and curing complete 4.00 Cmt 6664.30 Six thousand six hundred
including cost of form work but excl. reinforcement for reinforced sixty four rupees and
concrete work in Chajjas For All Floor Level. thirty paise only
16 Providing and lying controlled concrete M-250 and curing complete 3.00 Cmt 6402.43 Six thousand four
including cost of form work but excl. reinforcement for reinforced hundred two rupees and
concrete work in Sill / Coping For All Floor Level. forty three paise only
17 Providing and laying TMT Bar Fe 500D reinforcement for RCC work 43028.00 Kg 77.29 Seventy seven rupees and
including bending, binding and placing in position complete for all twenty nine paise only
18 Providing cement vata (10cm. x 10 cm. size) quarter round in cement 78.00 Rmt 24.28 Twenty four rupees and
mortar 1:1 including neat cement finishing, watering etc. complete. twenty eight paise only
19 Brick work using common burnt clay conventional building bricks 47.00 Cmt 4214.09 Four thousand two
having crushing strength not less than 35 Kg/Sqm. in Foundation and hundred fourteen rupees
Plinth in cement mortar 1:6 ( 1 cement : 6 fine sand ) including curing and nine paise only
20 Brick work using common burnt clay conventional building bricks 130.00 Cmt 4502.81 Four thousand five
having crushing strength not less than 35 Kg/sqcm. in Super structure for hundred two rupees and
All floors in cement mortar 1:6 ( 1 cement : 6 fine sand ) including eighty one paise only
curing etc. complete.
21 Half brick masonary in common burnt clay conventional building bricks 40.00 Smt 685.79 Six hundred eighty five
having crushing strength not less than 35 Kg/Sq.cm. in C.M. 1:4 ( 1 rupees and seventy nine
cement : 4 coarse sand ) including curing etc. complete for all floors. paise only
22 Providing 10 mm thick Mala cement plaster with 1x1 cm grooves in 408.00 Smt 161.36 One hundred sixty one
single coat on brick/concrete wall/ceiling for interior plastering upto rupees and thirty six paise
floor two level finished even and smooth including scaffolding, curing only
etc. complete. In Cement mortar 1:3(1 cement : 3 fine sand) for all
23 Providing 20 mm thick double coat Mala cement plaster with 1x1 cm 404.48 Smt 286.10 Two hundred eighty six
grooves on interior brick/concrete work for plastering comprising of rupees and ten paise only
base coat of 12 mm thick cement plaster in Cement mortar 1 : 4 (
cement : 4 coarse sand ) in rough finishing and 8 mm thick top coat of
cement mortar 1 : 2 ( 1 cement : 2 coarse sand ) finished with trovel
including scaffolding curing and 1 cm x 1 cm grooves at junction of
structural members etc. complete for all floors.
24 20 mm thick double coat sand faced with 1x1 cm grooves cement plaster 683.00 Smt 321.79 Three hundred twenty
on walls at any height consisting of 12 mm thick backing coat of C.M. one rupees and seventy
1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C.M. 1:1 (1 nine paise only
cement :1 sand) etc. complete.
25 Finishing wall with 100% acrylic emulsion wetherproof paint on wall 1371.63 Smt 120.26 Rupees One Hundred
surface to give an required shape even shade after thoroughly brushing Twenty Paise TwentySix
the surface to remove all dirt, and remains of loose powdered Only
materials.etc complete for any height as directed by Architect.
26 Wall painting (two coats) with plastic emulsion paint of approved brand 320.00 Smt 123.78 One hundred twenty three
and manufacture on new wall surface to give an even shade including rupees and seventy eight
two coats of putty & two coats of primer of approved brand including paise only
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth for all floors as directed by
27 Painting (two coats) with plastic emulsion paint of approved brand and 408.00 Smt 129.46 One hundred twenty nine
manufacture on Celing and sloping surface to give an even shade rupees and forty six paise
including two coats of putty & two coats of primer of approved brand only
including thoroughly brushing the surface free from mortar dropping and
other foreign matter and sand papered smooth for all floors as directed
28 Providing and laying 600x600 mm' Polished vitrified 8 mm thick tile 208.00 Smt 1557.42 One thousand five
(soluble Salt) flooring of Standard Company pattern ,Colour and Shade hundred fifty seven
laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on rupees and forty two
new surface and jointed with coloured cement slurry including finished paise only
with flush pointing & cleaning the surface etc complete for all floors as
directed by Architect or Engineer in chage.
29 Providing and laying Polished vitrified 8 mm thick tile (soluble Salt) of 18.00 Smt 1198.57 One thousand one
Standard Company pattern ,Colour and Shade in Skirting laid on 10 mm hundred ninety eight
thick cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with rupees and fifty seven
white cement slurry with matching pigments including cleaning etc. paise only
complete for all floors as directed by Architect or Engineer in chage.
30 P & L 600 mm x 600 mm vitrified 8 mm thick tile (Porcelin) flooring 112.00 Smt 1467.72 One thousand four
over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse hundred sixty seven
sand) on new surface or fixing on existing flooring by adhesive material rupees and seventy two
including dismentaling of existing flooring and jointed with color paise only
cement slurry including finised with flush pointing & cleaning the
surface etc. complete for antiskit
31 Providing and laying white or coloured / printed Vitrified tiles in 154.77 Smt 2550.41 Two thousand five
different colors of 1st quality of Bell/johnson /Asia /Kajaria /Somani hundred fifty rupees and
brand of 6 to 8 mm. thick and 1200 x 600 mm size in skirting, risers of forty one paise only
step and dedo on a bed of 10 mm. thick cement mortar 1:3 (1 cement :
coarse sand) finished with flush pointing with match as approved by
Engineer in charge.
32 Providing and fixing sills at doors & jambs using 15 mm Imported 143.36 Smt 7575.00 Seven thousand five
quartz marble/Artificial Granite laid on 10 mm thick cement mortar 1:3 hundred seventy five
(1 cememt:3 coarse sand) and jointing with grey cement slurry rupees only
includding rubbing and polishing etc. complete.
33 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 283.00 Smt 706.90 Seven hundred six rupees
concrete block 60 mm thick with grade of concrete M300 pnumatic and ninety paise only
compressed / vibrated mechanically and as per approved design
Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line and level as per guidlines of
IRC : SP 63-2018 etc. Complete.
34 Providing and fixing Designo or Equivalnt make pre-cast concrete kerb 86.00 Rmt 1537.46 One thousand five
stone of gray cement based concrete block 60cm length,30cm height and hundred thirty seven
15cm thick of M250 grade concret as per approved design and including rupees and forty six paise
excavation for fixing in proper line and level,filling the joint with C:M only
1:3 (1cement:3fine sand) etc complete.All product Make approved as
per tender and architect selection.
35 Painting three coats (one coat of priming coat + two coats of enamel 52.00 Smt 128.62 One hundred twenty eight
paint) on new steel and other metal surface with enamel paint including rupees and sixty two
preparing the surface by throughly cleaning, oil, grease, dirt and other paise only
foreign matter and scoured with brushes fine steel wood, scrapers and
sand paper etc. comp.
36 Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse 30.00 Cmt 3758.19 Three thousand seven
sand : 4- gradedstone aggregates 20 mm nominal size) and hundred fifty eight rupees
curing complete excluding cost of formwork in (A) Foundation and and nineteen paise only
37 Providing and laying broken china mosaic flooring for terrace using 12 552.13 Smt 779.70 Seven hundred seventy
mm to 20 mm broken pieces of glazed tiles to be laid over cement nine rupees and seventy
mortar 1:3 to plain or slope and to be tempered to bring mortar creme paise only
out upto surface using white cement including rounding off junctions
and extending them upto 15 cm along the wall,clearing with water and
oxalic acid etc. as directed.
38 Providing and fixing Double shutter Door with frame of M.S. Hollow 7.00 Smt 6522.58 Six thousand five
pipe of 35 x 100 mm with shutter made from Horizontal M.S. Square hundred twenty two
pipe of 25 x 25 mm thoroughout of height covered with 19 mm thick rupees and fifty eight
water proof standard marine ply finished with both side standard paise only
decorative laminate including floor spring with 300 mm S S Aldrop, Pull
handels of size 600 mm long S.S. grade 316 with two nos. of 300 mm
Tower bolts and necessary fixtures & fasteners etc. complete as directed
by Engineer in charge.
39 Providing and fixing 35mm thick Premium veneer finish flush door with 45.00 Smt 12594.37 Twelve thousand five
veneer and door having stanadard locking system,Doors required with hundred ninety four
heavy quality premium lock set, Doors required with heavy quality four rupees and thirty seven
nos of hinges, concealed door closer Doors four side covers with heavy paise only
qulity thick wooden battens with standard grooving on all borders,
Doors both side covers with premium grade Veneer sheet with required
necessery grooves,Doors all wooden part and veneer surfaces finish, All
work includes required all necessery hardware and
labour.Work,polishing includes cost of site installation complete as
direceted by architect and concern engineer in charge.
40 Heavy duty Aluminium two and Three track Sliding with fixed & 31.00 SMt 8204.05 Eight thousand two
openable window (Domal series) : Providing and fixing hevy duty hundred four rupees and
aluminium window having extruded anodised colour 30 micron slection five paise only
by architect as per required shapes and sizes suggested by Architect
Jindal/Banco/Hindalco shutter frame section 80mm x 45 mm x 1.20 mm
with Shutter Section 65mm x 27mm x 1.20mm withusing LAVAL or
equivalent brand bearing with 2 point locking system with projected
handle with comprising of hermetically-sealed 5 mm Toughen glass of
size and shape as required and specified, comprising of Anodised of
minimum 15 microns, shade shall be as per as per Architect's and Client
approval. with all necesary acessaries sliding locks,single or buble roller
(ball/pin suitable to provided in the shutters with central sealing
aluminum fittings and fixtures and transparent silicon sealant glass
fixing to frame as per details etc complete for window. gapes beetween
the wall & and the frame is sealed with sealant approved make and
sealing joints with clear weather silicon sealant of approved make.
41 Providing and Fixing fully adjustable, alluminium colour anodized 6.00 Smt 2429.05 Two thousand four
glazed louvered ventilator using main frame of section No 21458 size 95 hundred twenty nine
mm x 42.50 mm x 0.95 mm having weight of 0.738 kg/m, using 5 mm rupees and five paise only
thick 100 mm wide transparent glass blade louver having dual controls
i.e. two right and two left handles including powder coating to metal
work etc. complete.
42 Providing & Fixing 114mm wide G.I. Sheets lovers having weight not 28.00 Smt 3616.81 Three thousand six
less than 490 Gm/m roll formed to create 84mm wide louver snap fixed hundred sixteen rupees
on special shaped GI channel. Fix louvers & channels shall finished with and eighty one paise only
powder coating of 55 micron (1) 0.55mm thick sheet.etc. complet as per
detail drawing as directed.
43 Providinfg and fixing Safty grills of required pattern for windows/ Door 1791.82 Kg 111.50 One hundred eleven
using necessary size M.S. Square or Round bar, M.S flats and other rupees and fifty paise
structural steel at required spacing including cutting, welding and only
fabriction etc. including one coat of primer of approved quality and two
coats of oil painting as per detail drawing etc complete.
44 Providing and fixing MS Ladder of required pattern with MS 300.00 Kg 113.42 One hundred thirteen
flats(30x3mm) or round or square bars (12mm) at required spacing & rupees and forty two
with round headed bolts and nuts or screws or welding including primer paise only
coat of approved quality and two coats of oil paintas as directed by
engineer in charge
45 Providing and Fixing S. S. Railing made from Horizontal 50mm Round 8.00 Rmt 4675.61 Four thousand six
and 16mm x 16 G S.S. Railing Pipe and Vertical S.S. Squre Pipe 32 x hundred seventy five
32mm with all necessary labour and Material etc. Completed. rupees and sixty one paise
46 Providing and fixing cera / Somany Wall hung Carnival Rimless or 6.00 No 22097.54 Twenty two thousand
equivalent Series including jointing the trap with soil pipe in C.M. (1 ninety seven rupees and
cement : 1 fine sand) vitreous china (1 long pattern white colour with fifty four paise only
anchor fastner & soft close seat cover necessary fittings etc. complete.
47 Providing and fixing Table top wash basin of size 550 x 450 mm in 11.00 No 26549.76 Twenty six thousand five
granite top and sand witch type platform as per drawing incl. moulding hundred forty nine rupees
polishing with single hole for pillar tap incl. Providing & fixing fittings and seventy six paise only
such as pillar cock, waste coupline, stop tap C.P. bottle trap etc. comp.
(Cera, Nycer & Hindware).
48 Providing and fixing Half Stall Urinal or approved quality including 6.00 No 3748.79 Three thousand seven
conecting the Urinal with waste pipe , tap etc. complete. (A) White hundred forty eight
earthenware flat back or corner type size 325mm x 310mm x rupees and seventy nine
420mm.CERA/CRAVYS Code No. 4020104 paise only
49 Providing and fixing Jaquar / Somany Metropole flush valve or dual 14.00 No 6190.80 Six thousand one hundred
flush valve 40mm size with exposed shutt of provision Code FLV- ninety rupees and eighty
1085NG/ FLV-1093N or equivalent. paise only
50 Providing and fixing Jaquar / Somany C.P. Brass Spout bib cock of 16.00 No 3693.57 Three thousand six
heavy series with C.P. brass Nipple & brass elbow etc. complete. Code : hundred ninety three
SPJ 5463 as per directed engineer in charge. rupees and fifty seven
51 Providing and fixing Bottle Trap CODE: ALD-CHR-769 L250X190 or 9.00 No 2235.94 Two thousand two
equivalent (with Internal Partition) 32mm Size with 250mm Long Wall hundred thirty five rupees
Connection Pipes & Wall Flangewith including all accassary and fitting and ninety four paise only
charges etc. complete.
52 Providing and fixing Cera Pillar Cock Cat No. F9030451 or equivalent 9.00 No 3461.27 Three thousand four
with 15 mm dia with C.P. brass extension nipple 62 mm long etc. hundred sixty one rupees
complete. and twenty seven paise
53 Providing and fixing Angle stop cock JAQUAR brand FLORENTINE 11.00 No 1364.81 One thousand three
CAT. NO. - 5053N or equivalent with 15 mm dia with C.P. brass hundred sixty four rupees
extension nipple 62 mm long etc. complete. and eighty one paise only
54 Providing and fixing 5.0 mm mirror with S.S. stud on wall with all 10.00 Smt 2505.93 Two thousand five
necessary screw & nuts etc. complete. hundred five rupees and
ninety three paise only
55 Providing and fixing Jaquar / Somany continental series code No. ACN 9.00 No 1823.56 One thousand eight
Series or equivelant Towel ring with S.S. screw etc. complete. hundred twenty three
rupees and fifty six paise
56 Providing and fixing Jaquar / Hindware Kubix prime series code No. 9.00 No 1823.05 One thousand eight
AKP 35731 P series soap dish holder with s.s. screw etc. complete. hundred twenty three
rupees and five paise only
57 Providing and fixing Jaquar / Somany continental series code No. ACN 4.00 No 2230.08 Two thousand two
1151 N Toilet roll holder with S.S. screw etc. complete. hundred thirty rupees and
eight paise only
58 Providing and fixing Zoloto or equivalent Gun metal check or non-return 3.00 No 3521.87 Three thousand five
fullway wheel valve.(E) 50mm dia. hundred twenty one
rupees and eighty seven
59 Providing, Laying and jointing in true line and level U.P.V.C. 50mm 110.00 Rmt 1253.41 One thousand two
pipe (SCH-80) of following dia. Including fittings as approved by hundred fifty three rupees
Engineer-in-charge. Pipe shall be fixed on the wall with the help of Z and forty one paise only
Patti at every 2000 mm center to center or shall be concealed as directed
including necessary fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including cost of all materials.
60 Providing and fixing conceled center point to wall ceiling and floor 122.00 Rmt 447.72 Four hundred forty seven
CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) rupees and seventy two
seal for potable water of following nominal dia, tube fittings and Z paise only
clamps including making good the wall ceiling and floor etc. complete.
61 Providing and fixing conceled center point to wall ceiling and floor 85.00 Rmt 253.82 Two hundred fifty three
CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) rupees and eighty two
seal for potable water of following nominal dia, tube fittings and clamps paise only
including making good the wall ceiling and floor etc. complete. 25 mm
62 Providing and fixing conceled center point to wall ceiling and floor 70.00 Rmt 208.80 Two hundred eight rupees
CPVC( SDR 13.5) pipe having National Senitation Foundation (NSF) and eighty paise only
seal for potable water of following nominal dia, tube fittings and clamps
including making good the wall ceiling and floor etc. complete. 20 mm
63 Providing, laying and jointing in true line and level 110 diametre 100.00 Rmt 876.90 Eight hundred seventy six
U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and rupees and ninety paise
other end socketed with rubber ring, & fittings conforming to ISI 14735- only
1999 of approved make for drainage system pipe line, pipe shall be
jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm length x
145 mm heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
64 Providing laying (to level or slopes) and jointing reinforced concrete 100.00 Rmt 678.02 Six hundred seventy eight
Light duty non-pressure pipes I.S. class NP2 of the following internal rupees and two paise only
diameter with collars and butt ends prepared for collar joints including
testing of joints complete.(D) 300mm
65 Providing, laying and jointing in true line and level 160 diametre 65.00 Rmt 834.38 Eight hundred thirty four
U.P.V.C (Type B) conforming to IS13592-1992 with one end plain and rupees and thirty eight
other end socketed with rubber ring, & fittings conforming to ISI 14735- paise only
1999 of approved make for drainage system pipe line, pipe shall be
jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm diametre x 210 mm length x
196 mm heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
66 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 10.00 Nos 28.48 Twenty eight rupees and
110mm dia. forty eight paise only
67 Supplying and Fixing Z patti type G.I.Brackets for SWR/RWR/Water 30.00 No 243.71 Two hundred forty three
supply Plumbing (down take) pipe with GI Clamp and Nacessary rupees and seventy one
Fastenrs . paise only
68 Providing and fixing S.S. Cup Type Nahni Trap of Standard quality or 10.00 No 1033.74 One thousand thirty three
it's equivalent including cutting hole and self clean design itc completed rupees and seventy four
as directed. paise only
69 Providing and fixing square mouth trap P or S type of 150 mm x 100 6.00 No 1246.92 One thousand two
mm size SW gully trap with C. I. cover with frame of 300 mm x 300 mm hundred forty six rupees
size (inside) with standard weight. and ninety two paise only
70 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 60.00 Rmt 280.23 Two hundred eighty
pressure polythene pipes of the following outside Dia. Low densidy, rupees and twenty three
complete with special falnge compression type fittings, wall clipsetc. paise only
including making good the wall ceiling and floor.(F) 75mm
71 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 2.00 No 11042.74 Eleven thousand forty
coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation two rupees and seventy
concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50 mm four paise only
size) inside plastering 15 mm thick with Cement Mortar 1:3 (1-Cement :
3-coarse sand) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-cement : 2-Coarse sand :4-
stone aggregate 20 mm nominal size) finished smooth complete
including curing and festing (i) Inside size 900mm x 1200mm and 1.5M.
deep including C.I. cover with frame size 560mm diameter total weight
of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick msonry using
brick having crushing strength not less than 35Kg. / Sq.cm. in Cement
Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for
150mm diameter sewer.
72 Constructing brick masonry chamber for underground C.I. Inspection 10.00 No 7180.44 Seven thousand one
chamber and bends with bricks having crushing strength not less than hundred eighty rupees
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x and forty four paise only
610mm internal dimensions, total weight of cover with frame to be not
less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.
top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating coat of
neat cement on walls and bed concrete etc. complete.(iii) Inside
dimensions 600mm x 850 mm and 450mm deep for pipe lines with
three or more inlets.
73 Extra over items 24.44 for every additional depth of 0.1M. Of part 10.00 No 325.59 Three hundred twenty
thereof beyond 450mm depth for Brick masonry chamber.(iii) for five rupees and fifty nine
600mm x 850mm size. paise only
74 Charges for making holes from 50mm to 160 mm dia in RCC wall, slabs 10.00 No 858.50 Eight hundred fifty eight
or any other RCC members or Brick work by diamond core cutting rupees and fifty paise
machine of HILTI or equivalent including disposing the debris. For all only
75 Providing and fixing Sintex / Kaka Triple layer tank of series CCWS of 5000.00 Litre 11.65 Eleven rupees and sixty
required capacity with all necessary fittings & connection etc. complete. five paise only
76 Providing and fixing 50 mm dia copper metal ball cock of approved 2.00 No 189.84 One hundred eighty nine
quality as directed. rupees and eighty four
77 Providing and fixing dry chemical powder type fire extinguishers of 5 6.00 NOs 3556.84 Three thousand five
kg/Capacity of approved make with ISI mark (IS 2171) etc as directed hundred fifty six rupees
and eighty four paise only
78 Providing and fixing carbon dioxide type fire ext 4.5KG capacity 6.00 NOs 5236.90 Five thousand two
of approved make with ISI mark hundred thirty six rupees
and ninety paise only
79 Providing and fixing in position 300mm high, 150mm wide English / 80.00 No 1313.00 One thousand three
Gujarati letters made from1.0mm thick stainless steel sheet as directed hundred thirteen rupees
by Engineer-in-charge with all necessary tools & plants etc. complete. only
80 Design, supply & installation of Name/Number Plate including lettering 1.00 Smt 9437.44 Nine thousand four
made of polyvinayl of approved color on 1 mm thick stainless steel (SS hundred thirty seven
304) sheet as approved by Architect or Engineer-in-charge. For all floor rupees and forty four
81 Design, supply & installation of Signages including normal lettering 11.00 Smt 5850.83 Five thousand eight
with additional raised tactile and graphical symbols, height 15 mm to 55 hundred fifty rupees and
mm Brailled text and Braille locator made of zink sulphide based glow eighty three paise only
in the dark rigid sheet with high luminous property enclosed in a
transperent weather proof U/V stabilised plastic pasted on 3 mm thick
clear acrylic sheet sheet.
82 Providing and fixing polished 18 mm thick black granite with full round 2.00 Smt 2070.40 Two thousand seventy
edge and double side polished of approved quality in between urinal rupees and forty paise
and fixing with cement slurry & adhesive including moulding of both only
exposed edges as directed by engineering in charge etc. complete.
83 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 18.00 Smt 606.95 Six hundred six rupees
sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm and ninety five paise only
suspended by GI suspender channel of size 25 mm x 3 mm with
intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm
center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at
mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x
mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,
scoch bolt connecting cleat,joining compound top coat on ceiling
incl.making necy.opening for light fitting,diffuser etc. comp. as per
detail drawing as directed
84 Providing and fixing chicken mesh jali with square of 25 gauge at 54.00 Smt 228.06 Two hundred twenty
junction the masonary and RCC member including necessary scafolding, eight rupees and six paise
labour etc.complete for all floors. only
85 16mm Rebar, excluding bar. It should minimum 160mm embedded in 25.00 No 365.72 Three hundred sixty five
concrete, drill dia. Should be minimum 20mm for rebar, material should rupees and seventy two
be used Will Fischer FISV 360 or equievalent. (Pull out strength check paise only
should be given by contractor as per technical specification.
86 Add for more consumption of cement due to change in concreting of 3000.00 Kg 5.28 Five rupees and twenty
controlled / RMC cement concrete of any grade in R.C.C. members like eight paise only
column footings, columns, beams, pardi, vertical and horizontal fins etc.
instead of controlled / RMC cement concrete M200 / M250 / M300 /
M350 as per design mix with compare to cement consumption given in
special condition including loading, unloading, stacking and labour
charges for using in mixer machine for concreting etc. complete.
87 Providing and fixing 19 mm plywood shelf with both side laminated 0.40 Smt 2069.41 Two thousand sixty nine
sheet in cupboards with necessary teakwood beading etc. complete. rupees and forty one paise
88 Providing & fixing Roller blind of Jute having thickness 0.35 mm thick 2.30 SMt 2918.11 Two thousand nine
with acrylic coating etc. complete. hundred eighteen rupees
and eleven paise only
89 Providing and fixing 8 mm Laminated wood flooring with Floor 32.70 SMt 4144.23 Four thousand one
covering adhesives in line and level etc. complete. hundred forty four rupees
and twenty three paise
90 Providing and fixing Arabian curtain made from standard fabric range 2.90 SMt 5377.49 Five thousand three
Rs. 1200/Rmt with double combination stitching part, Ring curtain is hundred seventy seven
includes with Arabian alluminium powder coated Channel with required rupees and forty nine
necessery hanging clamps, Sockets and necessery hardware, Curtain paise only
required with blackout back side premium quality combination
fabric.All work includes with required necessery fabric and hardware
and stitching material.Work cost will includes with site installation
complete as directed by concern Architect and engineer in charge.
91 Providing and fixing in true horizontal level 600 mm x 600 mm false 32.70 SMt 1844.86 One thousand eight
ceiling using hot dipped galvnized steel section, Exposed surface with hundred forty four rupees
and capping, main tee of size 32 x 15 mm., having 0.25 mm gauge at and eighty six paise only
every 1200 mm. center to center maximum and rotary stitched cross Tee
of size 32 x 15 mm Having 0.27 mm gauge at every 600 mm C/C. The
above grid is uspended at every 1200 mm C/C. in both directions using
2.00 mm. Thick pre traightened GI wire laying adge ceiling tiles of size
600 x 600 mm having NRC 0.55. with two side gypsum ceiling patta etc.
92 Providing & fixing Interior Zebra Roller blind having thickness 0.35 mm 25.40 SMt 7108.75 Seven thousand one
thick with acrylic coating etc. complete. hundred eight rupees and
seventy five paise only
93 Providing and Fixing S.S. Name Plate of 1.20mm (18 Guage) With 0.30 SMt 17826.50 Seventeen thousand eight
Lettering & necessary Screw & Fitted on Wall in Line and Level etc. hundred twenty six
Complete. rupees and fifty paise
94 THREE SEATER SOFA:- Providing Material & Labour charges for 3.00 NO 54009.75 Fifty four thousand nine
making three sweater sofa as per given detail drawings. depth of seat is rupees and seventy five
850 mm to 900 mm & length 2400 mm & ht 425 mm. All "L" type paise only
supports & Top Bottom boxes made by 18mm Thk. Ply Wood. back
rest of soffa (675 mm ht ) made by 18 mm Thk. Ply Wood Seat area of
sofa cover with 100 mm (40 density) 45 mm soft foam & above it
mm u foam finished with composite lather. On back rest covers with
45mm soft + 45 mm foam, Hand rest & bottom front is covered with
mm foam having 32 density, as shown in detail drawing. Having 75 mm
deep ss legs of 7 nos. The foam is surrounded with the layer of
composite lather for softness and as finishing material. Complete with
all hardware like MS nails, SS-304 screws, Majarpat, spring, stapler,
putta-pati, adhesives, SR, etc.
95 CORNER TABLE 1.00 NO 11556.93 Eleven thousand five
Solid wood Corner table ,Made from teakwood with chemical hundred fifty six rupees
treatment, Wood must be seasoned and passed out from chemical and ninety three paise
treatment,Corner table with four nos solid wooden legs and table top only
with 12mm thick clear toughned glass / 4mm thick veener finish top
with 19mm thick BWP plywood, Table all wooden part finish with
malamine polish.Table having one nos of shelves and properly fixed
with wooden legs.Table size is 600 x 600 x 450h complete as per
drawing given by architect & direction given by Engineer in charge.
96 CENTER TABLE 1.00 NO 16841.75 Sixteen thousand eight
Solid wood Center table ,Made from teakwood with chemical treatment, hundred forty one rupees
Wood must be seasoned and passed out from chemical treatment,Center and seventy five paise
table with four nos solid wooden legs and table top with 12mm thick only
clear toughned glass / 4mm thick veener finish top with 19mm thick
BWP plywood, Table all wooden part finish with malamine polish.Table
having onenos of shelves and properly fixed with wooden legs.Table
size is 1050 x 600 x 450h complete as per drawing given by architect &
direction given by Engineer in charge.
97 PREMIUM MEDBACK REVOLVING CHAIR 32.00 No 18988.00 Eighteen thousand nine
Providing and fixing Medium Back chairs made of 1" ERW pipe of 16 hundred eighty eight
gauge seat and back is made of 12 mm hot press single ply and provided rupees only
with 40/50 & 23 density 12 mm pure foam (Feather foam make) and
covered with premium quality of leather/fabric. The chair with duo
colour fabric combinations as per EIC / Architect. The chair shall be
provided with 120mm BIFMA Passed gas lift and conventional tilt
mechanism with one lever control for lock and seat height adjustment.
Plate thickness shall 2.5 mm and angle is 3~18 (BIFM Passed) with
poly urethane one pipe handle and nylon base having 1359 kg weight
capacity as per BIFM standard.all the metal parts of the chair are pre
treated prior to powder coating/chrome.size 675X675X1165mm . seat
98 PREMIUM HIGHBACK REVOLVING CHAIR 6.00 No 24745.00 Twenty four thousand
Providing and fixing High Back chairs made of 1" ERW pipe of 16 seven hundred forty five
gauge seat and back is made of 12 mm hot press single ply and provided rupees only
with 40/50 & 23 density 12 mm pure foam (Feather foam make) and
covered with premium quality of leather/fabric. The chair with duo
colour fabric combinations as per EIC / Architect. The chair shall be
provided with 120mm BIFMA Passed gas lift and conventional tilt
mechanism with one lever control for lock and seat height adjustment.
Plate thickness shall 2.5 mm and angle is 3~18 (BIFM Passed) with
poly urethane one pipe handle and nylon base having 1359 kg weight
capacity as per BIFM standard.all the metal parts of the chair are pre
treated prior to powder coating/chrome.size 675X675X1165mm . seat
99 Providing and Arranging fix chair having structure of CRCA M.S. pipe 2.00 No 8420.88 Eight thousand four
20mm dia and 16 guage with 50 micron powder coated of approved seat hundred twenty rupees
and back 40 density PU foam covered with fabric of approved shade and and eighty eight paise
texture with one year replacement warranty. Wooden armrest to be only
provided as per approved design. Complete chair should be in suitable
shape including all materials and labours etc. complete as per drawing
and instruction of engineer-in charge. Visitor Chair
100 Providing and Fixing Side/Back Storage unit made of pre-lam particle 59.10 Smt 18296.15 Eighteen thousand two
board of grade-2 interior grade, top of storage will be made in 25mm hundred ninety six rupees
PLPB with all 4 side fixed with 2mm PVC edge band tape, carcass, shelf and fifteen paise only
and doors shall be made of 18mm PLPB, 2mm PVC edge band tape
shall be pasted on doors and rest of the storage exposed edges will be
pasted with .8mm PVC edge band tape and back shall be in 9mm PLPB.
Storage shall be made in complete knock down form and for installation
of the same there will be provision of proper punching to fix mini-fix
and cam fittings, for providing the strength dowels shall be fixed at
suitable distance between mini-fix fittings, there will be 2 nos. swing
openable shutters to be fixed with auto closed hinges, multi-purpose
lock and SS finish handles shall be fixed on the shutters, all required
hardware will be of EBCO/HETTICH/HAFELE or equivalent Make
UPPER 2 DRAWER SLIDE ON TELESCOPIC CHANNEL + BELOW
2 OPENABLE SWING SHUTTER )
101 Providing and fixing Two Seater Waiting sofa Overall Size 1190W ±10 6.00 No 34786.93 Thirty four thousand
x 670D ±10 x 785H ±10 , Seat Height 425mm , Seat & Back made of seven hundred eighty six
1.2mm thick perforated sheet metal duly powder coated , seat & back rupees and ninety three
cushioning made of Wooden Structure 6mm Ply (Hot Pressed) with paise only
foam upholstered With Leatherette , Seat & back made of CRCA Sheet
Perforated (Base & Back Are In Single L Shape With Radius At Bend)
Powder Coated In Silky Silver & Covered By Cushion , Height of the
seat from floor 425mm, Beam MS ERW Rectangular Tube Black
Powder Coated , Leg Chrome Plated Rectangular MS Structure , Bow
Shaped 1.2mm Thick Sheet , 1.2mm Thick Arm Rest Chrome Plated
Rectangular MS Structure , Perforated Seat & Back fixed with MS
Brackets duly powder coated , Beading Chrome Plated Ms Channel
Beading , Level Adjuster Chrome Plated MS Cap With PVC Inserted
Black Colour , All Pipes Shall Be Welded Properly Strongly and
conformity with regulations .
102 Providing and Arranging One seater sofa made from 100mm thick 40 1.00 No 27992.15 Twenty seven thousand
density foam with 25mm supersoft HD Covered for softness. Seat to be nine hundred ninety two
kept on high Density nylon elastic belt inside framing size 50mm x rupees and fifteen paise
37mm support armrest, legs and outer Frame having size 80mm x 37mm only
with inner brace between armrest and seat frame having Size 25mm x
50mm as showning the Photographs. Back 80mm thick 40 density foam
with 12mm thick supersoft HD covered for softness. Seat and back
covered with Fabric approved shade and wooden armrest Including all
materails. Hardware and labours etc. Completes as per
drawing/Photographs & details and as Directed by Engineer - in -
charge. 1 Seater Sofa Size :- 700mm X 750mm x 900mm( H )
103 Providing and Fixing Table made of pre-lam particle board of grade-2 8.60 Smt 37370.00 Thirty seven thousand
interior grade, top of table will be made in 25mm PLPB with all 4 side three hundred seventy
fixed with 2mm PVC edge band tape, Gable end and modesty shall be rupees only
made of 18mm PLPB, 2/.8mm PVC edge band tape shall be pasted on
exposed edges will be pasted. Table shall be made in complete knock
104 Workstation structure should made with 50 x 50 ms 16 gauge pipe and 14.70 Smt 35855.00 Thirty five thousand eight
horizontal support mamber made with 50 x 25 ms pipe, race way and hundred fifty five rupees
modesty made with 20 gauge crc perforated sheet with 50 to 60 micron only
powder coated. Screen above Work Top Screen should made with
30mm aluminum sections and provide fabric with soft board, or
magnetic board and half provided white marker or back painted glass
105 DOUBLE BED IN LAMINATE 1.90 Smt 16841.75 Sixteen thousand eight
Providing & Fixing double bed with made from 19mm thick BWP hundred forty one rupees
Grade Plywood with Outer Side 1mm thick Lainate and inside 1mm and seventy five paise
thick white backing laminte,Double bed head board with 50mm thick 40 only
density cushion bed back which covered with standard fabric,Bed sides
and legboard made from 18mm thick BWP grade plywood with outer
side 1mm thick laminate and inside 1mm thick white backig
lamnate.Bed Metress Ply base from 12mm thick BWP Grade Plywood
with both side backing lamination and with support of 2" x 2" clear teak
wood wood battens and malamine polish.All wooden panels are covered
with teak wood battens with malamine polish.Bed with head and leg
panels as per given design . complete as per drawing given by architect
& direction given by Engineer in charge.
106 MARBLE TOP DINNING TABLE 1.90 Smt 40299.00 Forty thousand two
Solid wood Dinning table ,Made from teakwood with chemical hundred ninety nine
treatment, Wood must be seasoned and passed out from chemical rupees only
treatment,, Dinning table is made from totally solidwood with 18mm
thick plywood top with 38mm thick Italian Finish Top, ,25mm thick
PVC bufferes are fitted with the legs,Dinning table finish with
malamine polish, Table size is complete as per drawing given by
architect & direction given by Engineer in charge.
107 DINNING CHAIR 4.00 No 10221.20 Ten thousand two
Solid wood Dinning chair ,Made from teakwood with chemical hundred twenty one
treatment, Wood must be seasoned and passed out from chemical rupees and twenty paise
treatment,Chair seat finish with 75mm thikcushioncovered with standard only
and premium quality fabric, Chair with 25mm thick Pvc buffers , chairs
all joint finish with airadlite lapi, Chair all wooden part finish with
malamine polish. complete as per drawing given by architect &
direction given by Engineer in charge.
108 DOUBLEBED FOAM METRESS 1.90 Smt 11591.77 Eleven thousand five
Metress made from Bonded foam with softy sandwich layer, Foam hundred ninety one
metress made from standard quality bonded foam of 100mm thick with rupees and seventy seven
50 mm thick softy foam which is from standard make, Both foam are fix paise only
with standard glue with both side kwilted cotton fabric cover, Bed all
edges are stitch with pipeing finish with standard finishing, Cotton kwilt
of Dark colour decorative shade require. matress thickness shall be 6"
109 Providing and fixing pannelling with using aluminium Pipe 50 x 25mm 4.80 SMt 8764.75 Eight thousand seven
framing, 12mm Plywood, Flueted Pannel / Lamination / Veneer with hundred sixty four rupees
solid wood moulding etc. Completed. All work includes required all and seventy five paise
necessery hardware and labour.Work includes cost of site installation only
complete as direceted by architect and concern engineer in charge.
110 Providing and fixing Dry wall partition of 75 mm thick Gypsteel Ultra™ 5.80 SMt 3014.84 Three thousand fourteen
stud partition which includes one layer of tapered edge 12.5 mm thick rupees and eighty four
Gyproc® Duraline (Conforming to EN 520:2004, Type D,F, I & R) is paise only
screw fixed with drywall Screws of 25 mm at 300mm Centers to either
side of 70 mm Gypsteel Ultra™ C stud (0.5mm thick having one flange
of 34 mm and another flange of 36mm made of GI steel) placed at
mm center to in 72 mm Gypsteel Ultra™ floor and ceiling channel (0.5
mm thick have equal flanges of 32 mm mage of GI steel). which is
anchored to the floor & ture ceiling using suitable anchor fasteners or
metal screws with nylon plugs. The boards are to be fixed to the frame
work with joints staggered to avoid leakage through joints. Finally
square and tapered edges of the boards are to be jointed and finished so
as to have flush look which includes filling and finishing with Gyproc
joiting compound and Gyproc joint paper tape (as per recommended
practices of saint-Gobain Gyproc India).
111 Providing & fixing rubber-/Antiviral /Antibacterial/ Vinyle coated 4.80 Smt 2357.85 Two thousand three
washable imported texture wallpaper apply on smooth wall with hundred fifty seven
necessary solutions as directed by E.I.C. rupees and eighty five
112 Providing and fixing Aluminium Anodised profile shutter with 4mm 1.00 SMt 10741.70 Ten thousand seven
plain glass & 75 mm imported hydralic hinges & necessary fittings etc. hundred forty one rupees
completed. and seventy paise only
113 Providing & fixing alluminium partition using 63 x 38 1.3 mm thick 1.00 Smt 2815.94 Two thousand eight
partition section 25 x 25 x 3 mm jointing angle 19 x 12 x 1.26 mm hundred fifteen rupees
glazing clip 5 mm thick sanit gobbin glass / Partical board, heavy rubber and ninety four paise only
gasket including powder coating to all alluminium sections, including all
labour, materials etc. complete.
114 Providing & fixing alluminium door shutter using 63 x 38 x 1.30 mm 1.00 SMt 3892.59 Three thousand eight
frame, 114.5 x 44.5 x 1.5 mm bottom rail, 84 x 44.5 x 1.30 mm style, hundred ninety two
top & middle 25 x 25 x 3 mm jointing angle, 19 x 12 x 1.25 mm glazing rupees and fifty nine
clip, 5mm sanit gobbin glass including heavy rubber gasket stainless paise only
steel hinges, lock & floor spring and colour anodized to all alluminium
sections including all labour, material etc. complete.
115 Providing & fixing of 6 mm thick Bison pannel with neccesarry 1.00 Smt 1936.36 One thousand nine
alluminium pipe framing on backside with necessary screw, bolts & nuts hundred thirty six rupees
etc. complete. and thirty six paise only
116 Providing and fixing 10mm thick toughen glass partition with clip 1.00 Smt 7895.29 Seven thousand eight
connector and necessary accessories with jointing with silicon etc. hundred ninety five
complete. rupees and twenty nine
117 P/F S. S. Sink of size 37" x 18" x 8" Bowl sink with Drain Board Silver, 1.00 Smt 9292.00 Nine thousand two
chrome finish with fitting etc. completed. hundred ninety two
118 Providing and fixing S.S. 8mm Glass shelf of size 12” x 6” approved 0.30 Nos 1167.31 One thousand one
quality and design & etc. complete. hundred sixty seven
rupees and thirty one
119 Box cutting the road surface to proper slope and camber for making a 109.00 Cmt 109.24 One hundred nine rupees
base for road work including removing the excavated stuff and and twenty four paise
depositing on the road side slope as directed upto 50Mt.lead. only
120 Providing and laying wet mix macadam base course 250 mm thick in 49.00 Cmt 1599.84 One thousand five
two layers using machine crushed B.T. chips as per required gradation hundred ninety nine
mixing with required optimum quantity of water, conveying the mix to rupees and eighty four
site of work, spreading in to grade and camber with mechanical paver paise only
and consolidation each layer with vibratory roller including cost of
material labour plant and equipment etc. complete.
121 Compaction and finishing of cement concrete road by trimix process 230.00 Smt 63.63 Sixty three rupees and
providing extra Labour charges for the trimix vacume dewatering service sixty three paise only
process on cement concrete road sutface by using vacuum dewatering
pump floater surface vibrator including making groves and rough finish
to surface including leveling etc complete.
122 Steel work, welded in built up sections framed work including cutting, 3780.00 kg 97.60 Ninety seven rupees and
hoisting, fixing in position and applying a priming coat of red lead sixty paise only
paint. (A)In beams and joists, channels angles Tees, flats, with
connecting plates or angle cleats as in main and cross beams. Hip
and jack rafters, purlins conneted to common rafters and the like
including Painting two coats (excluding priming coat) on new steel and
other metal surface with enamel paint as per Engineer in charge.
123 Providing and fixing pre-coated corrugated G.I. sheet of class-3 roofing 194.00 Sqmt 1575.10 One thousand five
fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter hundred seventy five
with bitumen and G.I. limpet washer or G.I. limpet washer. filled with rupees and ten paise only
white lead complete excluding the cost of purlins, Rafters and
Trusses.(1) 0.50 mm thick sheet.
124 Providing and fixing pre-cast concrete kerb stone of gray cement based 110.00 Rmt 397.53 Three hundred ninety
concrete block 30 cm length, 30 cm height and 15cm thick of M200 seven rupees and fifty
grade concret as per approved design and including excavation for fixing three paise only
in proper line and level, filling the joint with C:M 1:3 (1 cement : 3 fine
sand) etc complete.
125 Removing and scraping of old deteriorated plaster of any thickness from 693.14 Sq.m 20.55 Twenty rupees and fifty
wall / R.C.C member including stacking of serviceable material and five paise only
disposal of unserviceable from site of work with all lead and lift
126 Demolition of Brick Work and stone masonry including stacking of 381.26 Cu.m 577.92 Five hundred seventy
serviceable materials and disposal of unserviceable materials with all seven rupees and ninety
lead and lift (ii) In Cement Mortar two paise only
127 Demolition including stacking of serviceable materials and disposal of 70.41 Cu.m 1110.75 One thousand one
unserviceable materials with all lead and lift (A) RCC Work hundred ten rupees and
seventy five paise only
128 Dismentaling tiled of stone floors laid in mortar including stacking of 1084.82 Sq.m 50.11 Fifty rupees and eleven
serviceable materilas and disposal of unserviceable materials with all paise only
129 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 142.56 Each 197.09 One hundred ninety seven
including chowkhats architraves, holdfasts and other attachment etc. rupees and nine paise
complete and stacking them within all lead and lift.(i) Not exceeding 3 only
130 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 225.80 Rmt 78.51 Seventy eight rupees and
fittings and clamps including stacking the materials with all lead and lift fifty one paise only
( for any dia, of pipe)
131 Dismantling santtary fittings like wash basin . W.C. Pan Indian and 20.00 Each 425.93 Four hundred twenty five
European type, flushing tank etc. Including stacking the materials with rupees and ninety three
all lead and lift. paise only
132 Scraping oil paint from steel and other metal surface and making the 741.03 Sq.m 51.78 Fifty one rupees and
surface even (with Hand Scraping.) seventy eight paise only
133 Dismentalling Steel Work including distempering and stacking the 540.87 Kg 3.85 Three rupees and eighty
materials with all lead and lift five paise only
134 20mm thick sand faced cement plaster on walls upto height 10 metres 551.55 Sq.m 315.69 Three hundred fifteen
above ground level consisting of 12mm thick backing coat of C.M. 1:3 rupees and sixty nine
(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement paise only
: 1-sand) etc. complete.
135 Providing 10 mm thick cement Mala plaster in single coat on ceilings & 11.52 Sq.m 161.36 One hundred sixty one
sofits for interior plastering upto floor two level and finished even and rupees and thirty six paise
smooth in (ii) Cement Mortar 1:3 (1 Cement : 3 Fine Sand) only
136 Removing dry or oil bound distemper by a washing and scraping and 779.37 Sq.m 11.87 Eleven rupees and eighty
sand papering the wall surface smooth including necessary repairs to seven paise only
scratches complete.
137 Applying two coats Birla or Asian acrylic lappi (putty) on wall / ceiling 779.37 Sq.m 40.59 Forty rupees and fifty
surface by using two coats of primer of approved brand and preparing nine paise only
the surface even and smooth for colour work.
138 Wall painting (Two coats) with plastic emulsion paint of approved brand 779.37 Sq.m 83.18 Eighty three rupees and
and manufacture on undecorated wall surface to give an even shade eighteen paise only
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
139 Wall painting (two coats) with Royale luxury emulsion paint of 36.35 Sq.m 264.08 Two hundred sixty four
approved brand and manufacture on undecorated wall surface to give an rupees and eight paise
even shade including throughly brushing the surface free from mortar only
droppings and other foreign matter and sand papered smooth.
140 Painting two coats (excluding priming coat) on previously painted steel 174.80 Sq.m 111.09 One hundred eleven
and other metal surface with enamel paint, brushing to give an even rupees and nine paise
shade including cleaning the surface of all dirt, dust and other foreign only
141 Painting two coats (excluding priming coat) on new steel and other 36.07 Sq.m 92.20 Ninety two rupees and
metal surface with enamel paint, brushing, interior to give an even shade twenty paise only
including cleaning the surface an even shade including cleaning the
surface of all dirt, dust and other foreign matter.
142 Painting two coats (excluding priming coat) on new wood and wood 25.00 Sq.m 92.38 Ninety two rupees and
based surface with enamel paint, interior to give an even shade including thirty eight paise only
cleaning the surface of all dirt, dust and other foreign matter sand
papering and stopping.
143 Painting one coats (excluding priming coat) on previously painted wood 20.00 Sq.m 113.43 One hundred thirteen
and wood based surface with enamel paint, to give an even shade rupees and forty three
including cleaning the of all dirt, dust and other foreign matter. paise only
144 Polishing with melamine polish over existing wood and wood based 12.39 Smt 505.25 Five hundred five rupees
surface to given even surface including cleaning oil, grease, dirt and and twenty five paise
sand papered smooth and including a coat of wood filler. only
145 Applying Smooth/Metalic texture paint of heavy bodied water based 3.78 Smt 882.02 Eight hundred eighty two
acrylic paint apply with a roller trowel or sponge depending a textured rupees and two paise only
finish on interior walls & providing decorative appearance with all
material & labour etc. compled.
146 Providing and fixing door having side hung single shutter having 25.98 Smt 3366.15 Three thousand three
factory fabricated std. Extruded aluminium colour anodized hollow hundred sixty six rupees
section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, and fifteen paise only
hollow portion of door frame shall be filled with non teakwood wood,
with factory made 35 mm. Thick flush door both side 1 mm thick pre
laminated with knob lock as per detail colour & pattern apporoved by
this office including necessary anodized alluminum fixtures and
147 P & L 396 X 396 ceramic tiles 8 mm thick tile flooring over 20 mm 11.52 Smt 1704.31 One thousand seven
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new hundred four rupees and
surface or fixing on existing flooring by adhesive material and jointed thirty one paise only
with color cement slurry including finised with flush pointing &
cleaning the surface etc. complete
148 Providing and laying 600 x 600 Full body Virtified 16 mm thick tile 10.00 Smt 2894.32 Two thousand eight
skirting, over 20mm. (average) base of cement morter 1:6 (1cement :6 hundred ninety four
coarse sand) or L.M. 1:1.5 laid and making 5mm Spacer all around tiles rupees and thirty two
and filling with epoxy materials etc. complete. paise only
149 Providing & Fixing Sandwich type Platform of 600 mm wide using Top 4.50 Sq.m. 7046.81 Seven thousand forty six
18 mm thick granite of approved shade and sample and bottom 25 mm rupees and eighty one
thick single side Polished kota stone with 25 mm thick screed of cement paise only
mortar 1:3 With granite Facia Patti and vertical End granite supports.
The stone shall be fixed by chassing in to the wall surface and supported
vertically with 25mm thick sandwich kota stone support including SS
Sink of size 610 x 460 mm waste brass coupling, stainless steel
extension nipple, flexible PVC outlay pipe, Hindware Sink cock with
Casted Swinging Spout F100034 etc complete as suggested by
Architect/Engineer -in-charge.
150 Providing and fixing one piece made from 18 mm thick granite shelves 10.51 Smt 3393.42 Three thousand three
in cupboard using approved adhesive to adhere two granite slab having hundred ninety three
half round moulding and fixed with masonry / R.C.C. member with rupees and forty two
three sides jari of required size and depth including finishing with paise only
cement mortar 1:1 ( 1 cement : 1 coarse sand) making good the wall /
R.C.C member in the line and level etc. complete as per detailed
151 Providing and fixing cast iron (Spun) Nahni trap of the following 5.00 Each 885.25 Eight hundred eighty five
nominal diameter of self cleaning design with C.I. screaed down or rupees and twenty five
higned grating including cost of cutting and making good the walls and paise only
floor 100mm inlet and 50mm outlet.(C) 100mm dia.
152 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -75 mm 5.00 Each 586.27 Five hundred eighty six
diameter with jail of the following nominal diameter of self cleaning rupees and twenty seven
design wit C.I. scread down or hinged grating including the cost of paise only
cuttiong and making good the wall.
153 Providing and fixing colour wash down water closet Orissa type W.C. 6.00 Each 3288.02 Three thousand two
pan with integral p or s trap jointed with C.I. pipe in C.M 1:1 etc. hundred eighty eight
complete. (Cera, Nycer, Hindware). rupees and two paise only
154 Providing and fixing wash down water closet (European type, W.C. Pan) 6.00 Each 4361.92 Four thousand three
with integral P or S trap including jointing the trap with soil pipe in hundred sixty one rupees
Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be and ninety two paise only
measured and paid for separately)(A) vitreous China Pattern :(i) in white
155 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 35.00 Rmt 72.65 Seventy two rupees and
Pipe ( SCH- 40) for cold water including fittings make or equivalent as sixty five paise only
approved by Engineer In Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and
joints and fixing the same with adhesive solvent, including cost of all
156 Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. 40.00 Rmt 91.84 Ninety one rupees and
Pipe ( SCH- 40) for cold water including fittings make or equivalent as eighty four paise only
approved by Engineer In Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and
joints and fixing the same with adhesive solvent, including cost of all
157 Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. 40.00 Rmt 119.15 One hundred nineteen
Pipe ( SCH- 40) for cold water including fittings make or equivalent as rupees and fifteen paise
approved by Engineer In Charge. Pipe shall be fixed on the wall with only
the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and
joints and fixing the same with adhesive solvent, including cost of all
158 Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. 30.00 Rmt 148.12 One hundred forty eight
Pipe ( SCH- 40) for cold water including fittings make or equivalent as rupees and twelve paise
approved by Engineer In Charge. Pipe shall be fixed on the wall with only
the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and
joints and fixing the same with adhesive solvent, including cost of all
159 Providing and fixing Jaquar / Somany C.P. Brass angle Cock / Conceal 2.00 NOs 2212.66 Two thousand two
Cock of Fonte / Vignette series with C.P. brass Nipple & brass elbow hundred twelve rupees
etc. complete. Code FLR 5053N/ FUS 29053 and sixty six paise only
160 Providing & fixing C.P. brass heavy hand faucet of approved quality. 4.00 NOs 2352.04 Two thousand three
etc. complete. hundred fifty two rupees
and four paise only
161 Providing and fixing S.W. gully trap with C.I. grating brick masonary 4.00 No. 1292.19 One thousand two
chamber and water tight C.I. cover with frame of 300 mm x 300 mm hundred ninety two
Size (inside) with standard weight (i) Square mouth traps. (A) 100 mm x rupees and nineteen paise
100 mm size - P type. only
162 Providing and fixing Gun metal check or non-return fullway wheel 4.00 Each 186.83 One hundred eighty six
valve.(A) 15mm dia. rupees and eighty three
163 Providing and fixing Gun metal check or non-return fullway wheel 4.00 No. 203.82 Two hundred three rupees
valve.(B) 20mm dia. and eighty two paise only
164 Providing and fixing Gun metal check or non-return fullway wheel 2.00 Each 420.63 Four hundred twenty
valve.(C) 25mm dia. rupees and sixty three
165 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 33.20 Rmt 339.05 Three hundred thirty nine
pressure poluthene pipes of the following outside Dia. Low densidy, rupees and five paise only
complete with special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G ) 110 mm
166 Providing, laying and jointing in true line and level 160 diametre 60.00 Rmt 834.38 Eight hundred thirty four
U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and rupees and thirty eight
other end socketed with rubber ring, & fittings conforming to ISI 14735- paise only
1999 of approved make for drainage system pipe line, pipe shall be
jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm diametre x 210 mm length x
196 mm heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
167 Providing and Fixing WPC door with frame with 100 x 45 mm frame 12.77 Smt 9233.93 Nine thousand two
hollow WPC (wood plastic Composite) door frame wrapped with 0.14 to hundred thirty three
0.20 mm PVC film & 32 mm doors with both side laminate, with rupees and ninety three
matching shade of PVC wrapping including 3.15 mm exterior grade paise only
HDF door Skin with tubular particle board (from Saurland Spanplatte
Germany) / 55 ++ mm on all 4 sides with imported dried pinewood
(USA) / inner frame Dynea PF thermosetting glue from norway.
168 Providing and fixing window having extruded aluminum Colour 64.28 Smt 1713.70 One thousand seven
anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt hundred thirteen rupees
1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 and seventy paise only
mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm
x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of
horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,
vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,
@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted
float glass with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details etc
complete for window.
169 Providing and fixing standared extruded of alluminium section of size 7.84 Smt 1301.82 One thousand three
63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized hundred one rupees and
alluminium frame with 5 mm thick transparent bronze colour tinted float eighty two paise only
glass as details etc complete for Fix window.
170 Providing and fixing standared extruded of alluminium section of size 11.81 Smt 1175.56 One thousand one
63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) hundred seventy five
with colour anodized alluminium frame for ventilation with 5 mm thick rupees and fifty six paise
frosted glass as details etc complete for Ventilation only
171 Providing & laying terracota clay roofing tiles having interlocking 218.40 Smt 1359.24 One thousand three
arrangment for fixing on slopping roof on 10 mm thick cement mortar 1 hundred fifty nine rupees
:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry and twenty four paise
including necessary scaffolding upto 10 mtr height etc. complete.as only
directed by engineer-in-charge.
172 Provoding and laying Heavy duty reinforced acrylic water proofing 54.00 Smt 412.95 Four hundred twelve
Coating cover on existing ips flooring through authorised application of rupees and ninety five
pidilite Industries Ltd. Using one coat of Dr.Fixit Premiseal and two paise only
coats of Dr.Fixit new coats in different colours including the repairing of
surface crackes,damaged portion,sharpedged flooring etc.by means of
polymer modified screed and filled with Dr.Fixit crack or Dr.Fixit
unifiller or polymer modified motar in wider crackes including surface
cleaning,washing and removing dust,dirt oil,grease and loose particle
etc.prior to laying of water proofing treatements etc.including all
aterial,labours,tools, machinary,taxes,etc. complete or as dircted by
engineer by Engineer-in-charge or manufacturer's specification.
173 Providing and fixing Jaquar / Somany C.P. brass concealed body for 1.00 Nos 5128.02 Five thousand one
single leyer high flow divertor with butten assembly code No. ALD- hundred twenty eight
079N/ARC 87065C rupees and two paise only
174 Providing and fixing Jaquar / Somany Florentine series single lever 1.00 Nos 4512.43 Four thousand five
exposed parts of hi flow Divertor consisting of operating lever etc. hundred twelve rupees
completed. and forty three paise only
175 Providing and fixing Jaquar / Somany overhead shower round shape 1.00 Nos 6423.10 Six thousand four
single flow chrome plate code No. OHS 1789 / 1759 & shower Arm hundred twenty three
SHA (487) 190 mm long light body round shape for wall mounted rupees and ten paise only
shower with flange etc. complete.
176 Providing & fixing Frosted Film on glass in line & level etc. complete. 1.00 SMt 1016.31 One thousand sixteen
rupees and thirty one
177 Providing and fixing C.P brass wall mixture three in one cock 15mm dia. 1.00 NOs 9988.90 Nine thousand nine
With center point (Jaquar/Cera brand RUBBY or victor code hundred eighty eight
CHR5281PM make equivalent brand) as per E.I.C. rupees and ninety paise
178 Providing & fixing 2.0 mm thick FRP plain or color sheet fixing with 11.04 Smt 1291.25 One thousand two
M.S. square pipe with necessary J bolts or screws & nuts etc. comp. hundred ninety one
rupees and twenty five
179 Providing & fixing S.S. Square Heavy Brass Mortice Lock with 1.00 NOs 3716.80 Three thousand seven
necessary screw etc. complete. hundred sixteen rupees
and eighty paise only
180 Providing and fixing 1.3 mm PVC Flooring Fixing with SR 505 or Glue 2.60 SMt 1215.24 One thousand two
as directed by E.I.C. hundred fifteen rupees
and twenty four paise
181 Providing & fixing of 3 mm thick Aluminium composite Sheet with 3.90 Smt 3682.75 Three thousand six
neccesarry alluminium pipe framing on backside with necessary screw, hundred eighty two
bolts & nuts etc. complete. rupees and seventy five
182 Providing and fixing 3.0mm powder coated M.S. plate with CNC cutting 3.90 Smt 5743.62 Five thousand seven
with 7 tank process powder coating and fitting with black coated sheet hundred forty three
etc. comp. rupees and sixty two
183 Providing and fixing Galvanised 50mm PUF Roof Panel 50mm with 2.60 Smt 5195.41 Five thousand one
side Cap-50mm and Trapezoidal end Cap-20mm with hilti screw and hundred ninety five
rubber silicon sealer etc complete as directed by Engineer in charge. rupees and forty one paise
184 Providing and laying 600 x 600 Full body Virtified 16 mm thick tile 9.20 Smt 2987.24 Two thousand nine
flooring over 20mm. (average) base of cement morter 1:6 (1cement :6 hundred eighty seven
coarse sand) or L.M. 1:1.5 laid and making 5mm Spacer all around tiles rupees and twenty four
and filling with epoxy materials etc. complete. paise only
185 Providing and fixing 12 mm thick tuffan glass Door with Floor Spring of 4.50 Smt 13778.82 Thirteen thousand seven
80 to 100 Kg. Capacity, top and bottom patch, S.S. Handle 10" and wall hundred seventy eight
to glass lock and necessary accessories with jointing with silicon etc. rupees and eighty two
complete. paise only
186 Providing 4 mm Luxture decorcem expose concerte or brick concerte 2.70 Smt 1869.71 One thousand eight
coating and wall textured paint using base coat, tapping, durabond hundred sixty nine rupees
expose RCC materials and finishing with decorsil two coat etc. and seventy one paise
complete. As dircted by consult architech. only
187 Providing and fixing 6mm HPL (High Pressure Laminated Sheet) of 2.70 Smt 6909.19 Six thousand nine
Sundek or equivalent brand and 50mm x 25mm Alluminium box section hundred nine rupees and
pipe colour powder coated alluminium rivet.etc complete. nineteen paise only
188 Providing and fixing chain link jali of size 1.2 mt. height on existing M.S 1.00 Smt 559.45 Five hundred fifty nine
angle post with necessary pins in line & level etc. comp. rupees and forty five
189 Providing and Fixing 5mm Flueted Glass with necessary hardware & 1.20 Smt 3134.89 Three thousand one
Materials etc. Completed. hundred thirty four rupees
and eighty nine paise only
190 Providing and Fixing Artificial Granite 15mm thick fixing on Service 4.80 Smt 5880.09 Five thousand eight
Table with necessary Chemical & Materials etc. Completed. hundred eighty rupees
and nine paise only
191 Providing and Laying 1200 x 600 mm vitrified 8 mm thick tile flooring 8.00 Smt 2515.60 Two thousand five
over 50 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse hundred fifteen rupees
sand) on new surface and material and jointed with color cement slurry and sixty paise only
including finised with 4mm epoxy pointing & cleaning the surface etc.
192 Providing & fixing Roller blind of VENICE having thickness 0.35 mm 2.40 Smt 7765.16 Seven thousand seven
thick with acrylic coating with superior quality acmedamechanism hundred sixty five rupees
including Motors tubular one Nos and Remote for cantroling the Blind and sixteen paise only
up and Down with all accessory fittings like bracket, chain etc. as
directed by engineer in charge.etc. complete.
193 Providing and Fixing 50 mm repicon walls fixing with 51mm floor 2.40 Smt 3757.69 Three thousand seven
channels at bottom & 51 mm GI ceiling channels at top with line and hundred fifty seven
Level etc. completed. rupees and sixty nine
194 Providing and fixing G.I. Crimped Jali made from framing of 40 x 40 x 1.00 Smt 1859.00 One thousand eight
5 mm M.S. Angle & 25 x 25 mm MS Pipe with Inner side 20 x 20mm hundred fifty nine rupees
G.I. Crimped fitted on wall with Khilla & one coat of primer & Two only
coats of oil painting etc. Complete.
195 Providing and Fixing Chain Link Fencing using 25 x 25mm Sq. Pipe 4.80 Smt 957.03 Nine hundred fifty seven
with Chain Link Jali with necessary bolts & Washer & Oil Paint etc. rupees and three paise
Completed. only
196 Repairing & providing & fixing concentrino razor blade 12G wire loop 4.00 Rmt 2311.75 Two thousand three
of 750 mm dia. on top of compound wall with M.S. angle & G.I. Barbed hundred eleven rupees
wire as per instruction of Engineer including fixing with binding wire and seventy five paise
etc. as directed by Engineer in charge. only
197 Providing and Fixing 75mm repicon walls fixing with 76mm floor 2.40 Smt 3627.98 Three thousand six
channels at bottom & 76 mm GI ceiling channels at top with line and hundred twenty seven
Level etc. completed. rupees and ninety eight
198 Providing and Fixing 50 mm Jems Panneling with using 19 mm plywood 1.40 Smt 5266.15 Five thousand two
& 12mm Plywood & on top 1.0 mm Lamination Horizontal / Walnut / hundred sixty six rupees
Oak / Season Wood Series etc. Complete. work shall be as directed by and fifteen paise only
architect concern Engineer in Charge.
199 Providing and fixing toilet cubical with 11 mm compact both side 1.00 Smt 9130.18 Nine thousand one
laminates board with vertical alluminium S.S. finish 12 mm Big U type hundred thirty rupees and
heavy section alluminium S.S. finish 12 mm top rail, H Door edge, with eighteen paise only
necessary fitting S.S. matt door lock, clothes hook, S.S. door support
leg, S.S. matt door nop etc. comp.
200 Providing and Fixing Partition made from 50x25 mm aluminium pipe 1.00 Smt 3545.03 Three thousand five
framing and 8 mm plywood with top face finished with 3.6 mm MDF as hundred forty five rupees
per approved by E.I.C . Etc. complete. and three paise only
201 Providing and fixing Slim Aluminium Partition with using 45 x 16mm 1.00 Smt 12104.76 Twelve thousand one
Slim Section and 8mm thick toughen glass With Necessary clip hundred four rupees and
connector and necessary accessories with jointing with silicon etc. seventy six paise only
202 Providing and fixing Slim 8mm thick tuffan glass Door with 45 x 16mm 1.00 Smt 15872.76 Fifteen thousand eight
Slim Section & Floor Spring of 80 to 100 Kg. Capacity, top and bottom hundred seventy two
patch, S.S. Handle 10" and wall to glass lock and necessary accessories rupees and seventy six
with jointing with silicon etc. complete. paise only
203 Applying Deco Paint/PU Paint (two coats) with approved brand and 1.00 Smt 4605.92 Four thousand six
manufacture on undecorated wall surface to give an even shade hundred five rupees and
including throughly brushing the surface free from mortar droppings and ninety two paise only
other foreign matter and sand papered smooth.
204 Providing and Fixing Teakwood border patti of size 3" x 1" Ghana Patti 1.00 Rmt 1152.79 One thousand one
with machine spray melamine polish with all labour and materials etc. hundred fifty two rupees
completed. and seventy nine paise
205 Providing and fixing C.P. Brass Jaquar / Somany telephone shower with 1.00 NO 7840.13 Seven thousand eight
S.S. stand, spout and shower tube etc. complete. hundred forty rupees and
thirteen paise only
206 Providing and fixing Jaquar / Somany C.P. Brass Two way bib cock of 1.00 NO 3548.38 Three thousand five
heavy series with C.P. brass Nipple & brass elbow etc. complete. Code : hundred forty eight
FLR 5041 rupees and thirty eight
207 Providing and fixing Jaquar / Hindware continental series towel rack 1.00 NO 5482.28 Five thousand four
600 mm long with lower hangers code AKP 35781PS with S.S. screw hundred eighty two
etc. complete. rupees and twenty eight
208 Providing and fixing Jaquar /Essco continental series Kitchen Sink Cock 1.00 NO 3867.80 Three thousand eight
with S.S. screw etc. complete. hundred sixty seven
rupees and eighty paise
209 Providing and fixing P.V.C. L.L. tank with all necessary labour & 1.00 NO 3026.35 Three thousand twenty
fittings etc. complete. six rupees and thirty five
210 Providing and fixing Zoloto or equivalent Gun metal check or non-return 8.00 NO 2403.80 Two thousand four
fullway wheel valve.(E) 40mm dia. hundred three rupees and
eighty paise only
Total (Civil) …A
Rupees Two Crore Four Lakh TwentyNine Thousand Five Hundred NinetySix Paise FourtyOne Only
In figure Total Amount
In figure Total Amount
Item Rs. Ps. according to
Item of work but may be Unit
No. In words estimated
Replacing old and U/s by New Point wiring for Light / Bell with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of following type, erected
Rupees Four Hundred
211 on PVC / Metallic/Wooden box, single mounting base frame covered 277 Pt.
Ten And Paise Six Only
with textured/metallic/white front plate modules erected on / in wall /
ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed. (j) in existing pipe erected concealed in
wall/ceiling completeCat. III
Replacing old and U/s By New Point wiring for secondary light point
with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in
below type of pipe to be erected complete with earth continuity and
Rupees One Hundred
necessary connection with primary light with accessories erected on
Metal / PVC / wooden box covered covered with appropriate front plate
135 Pt. 120.19 Twenty And Paise
modules erected on / in wall / ceiling for open / concealed wiring. with
necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per
pipe erected with following type of accessories. (j) in existing pipe
erected erected concealed in wall/ceiling complete
Replacing old and U/s by New Point wiring for FAN with 2-1.5 sq.mm
& earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV
Grade FRLS PVC insulated multi strand copper wires up to 10 mtr
length, in below type of pipe erected with 6A Modular type switch and
hum free EME four or more step type electronic fan regulator with Rupees Five Hundred
213 separately mounted and accessories with earth continuity of following 60 Pt. 556.51 Fifty Six And Paise Fifty
type erected on PVC / Metallic/Wooden box, single mounting base One Only
frame covered with textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling complete Cat. III
Replacing old and U/s by New Point wiring for on board Looped Plug
with 6A Modular type switch & 5 pin socket erected on PVC / Rupees Two Hundred
214 Metallic/Wooden box, single mounting base frame covered with 117 Pt. 257.55 Fifty Seven And Paise
textured / metallic/white front plate modules erected on / in wall / Fifty Five Only
ceiling with following type accessories -Cat. III
Replacing old and U/s by New Providing following type of Modular
Type Accessories mounted with PVC / metallic/Wooden box, single
215 mounting base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site situation
directed by Engineer In charge. Cat-lll
Rupees One Hundred
215a (1)One No. SP 6 Amp. 60 Nos. 151.5 Fifty One And Paise Fifty
Rupees One Hundred
215b (2) One No 3/5 pin plug. 60 Nos. 151.5 Fifty One And Paise Fifty
Rupees Two Hundred
215c (3) Two Pin/RJ-11 Telephone Socket [B] For Two Gang Cat.III 28 Nos.
Ten And Paise Eight Only
Rupees Twenty Five And
215d (7) Blank Plate Single. 134 Nos.
Paise Twenty Five Only
Rupees One Hundred
215e (9) 16 Amp. SP one way switch. 55 Nos. 180.79 Eighty And Paise Seventy
Rupees One Hundred
215f (10) 6/16Amp. Universal socket. 55 Nos. 199.98 Ninety Nine And Paise
Ninety Eight Only
(21) Foot Light as per colour requirement with concealed box, modular Rupees Three Hundred
215g accessories, acrylic glass cover with suitable LED watt with all 14 Nos 316.13 Sixteen And Paise
accessories as per following module (a) Two modules Cat-III Thirteen Only
Replacing old and U/s by New Point wiring for Two Way Controlled
Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both
are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires erected in below type of pipe with 6A Modular type
Rupees Five Hundred
switches and following type of accessories erected on PVC /
Metallic/Wooden box, single mounting base frame covered with
27 Pt. 514.09 Fourteen And Paise Nine
textured / metallic/white front plate modules erected on / in wall / ceiling
as per pipe erected. with necessary batten/angle holder or ceiling rose or
H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling complete
Replacing old and U/s by New Providing and erecting ISI mark Medium
class RIGID PVC PIPES of following size complete to be erected on/in
wall or ceiling erected with necessary PVC fittings & Junction boxes
fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed
Rupees Twenty Four And
217a (a)20 mm 1050 Mtrs
Paise Twenty Four Only
Rupees Thirty Three And
217b (b) 25 mm 685 Mtrs
Paise Thirty Three Only
Rupees Fifty Four And
217c (c) 32 mm 95 Mtrs
Paise Fifty Four Only
Rupees Sixty Seven And
217d (d) 40 mm 60 Mtrs
Paise Sixty Seven Only
Replacing old and U/s by New Providing & erecting PVC Corrugated
Rupees Twenty One And
218 Flexible Conduit with required nos. of coupling, PVC bushes, Check- 142 Mtrs
Paise Twenty One Only
nuts etc. complete of following sizes. (2) 25 mm
Supplying and laying UPVC cable trunking system comprising
unplasticised polyvinyl, chloride rigid material with ignition free and
Rupees Four Hundred
flame proof confirming BS with necessary end caps Internal and
external bend, flat bends, coupler, tee etc..All necessary accessories and
55 Mtrs 428.24 Twenty Eight And Paise
Twenty Four Only
measuring of following sizes
(2) 100 mm x 50 mm trunking
Replacing old and U/s by New Providing and erecting Mains with
KV grade FRLS PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected concealed in /flushed on Rupees Sixty Two And
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
Paise Sixty Two Only
stranded wire of green colour for earth continuity of following size (E)
in existing pipe (b) 2 wire 2.5 sq. mm
Replacing old and U/s by New providing and erecting Mains with
KV grade FRLS PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected in / on wall / ceiling with
Rupees Eighty Six And
221 sq. mm copper conductor FRLS PVC insulated stranded wire of green 461 Mtrs
Paise Eighty Six Only
colour for earth continuity of following size
(E) in existing pipe (a) 2 wire 4 sq. mm
Replacing old and U/s by New providing and erecting Mains with
KV grade FRLS PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected in / on wall / ceiling with
Rupees Three Hundred
sq. mm copper conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size
45 Mtrs. 398.95 Ninety Eight And Paise
Ninety Five Only
(E) in existing pipe
(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm )
Providing & Erecting 3mm thick acrylic Sheet with grooving as directed Rupees Three And Paise
223 3110 Sq.Inch
Replacing old and U/s by Providing & erecting Switch board for
Computer or electric apparatus consisting of following modular type
accessories mounted with PVC / Metallic concealed/open box with Rupees One Thousand
single mounting base frame covered with textured/metallic /white front One Hundred Thirty
plate,modules erected with necessary connections as directed 1 no.
Three And Paise Twenty
6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 Two Only
pin Plug (B) For Modular Type Accessories Cat. III
Replacing old and U/s by New Supplying & erecting Approved make
call bell indicator with buzzing sound and Red light indicating lamp with Rupees One Hundred
225 Red light button to attend the call suitable for 240 v 50 c/s supply to be 24 Nos. 148.47 Forty Eight And Paise
erected Forty Seven Only
Replacing old and U/s by New Providing and erecting Approved make
Ceiling fan with double ball bearing ISI mark with condenser A.C. Rupees One Thousand
23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing Five Hundred Ninety Six
hook or clamp with earthing. [Make shall be approved by Engineer in
And Paise Eighty One
charge] Make- Bajaj,Crompton, Usha, Havells 60 nos. replacing Only
Replacing old and U/s by Supplying and erecting 19 / 20 mm. nominal Rupees One Hundred
227 bore Medium Class M.S. Pipe down rod erected duly painted for fan 60 Rmt. 108.07 Eight And Paise Seven
complete with proper insulation without leakage and earthing. Only
Replacing old and U/s by Supplying & erecting Fan Hook of 10 mm Rupees Forty Three And
M.S. Round bar grouted in RCC slab with Making the site as original.
Paise Forty Three Only
Rupees One Thousand
Replacing old and U/s by New Supplying & erecting approved make
Seven Hundred Three
229 low noise decorative exhaust fan having square frame ABS body with 15 Nos.
And Paise Eighty Seven
inbuilt lowers & square frame. 200mm with 1350 RPM Cat.II
Replacing old and U/s by Supplying & erecting single phase approved
make industrial exhaust fan suitable for medium duty ring mounted low Rupees Two Thousand
230 noise operation suitable for medium duty having following dia size and 3 Nos. 2054.34 Fifty Four And Paise
maximum speed in RPM Thirty Four Only
[A] 305 mm dia 900 RPM Cat.II
Replacing old and U/s By New Supplying and erecting LED indoor
fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated
and high U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, Rupees Two Hundred
231 CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED 115 Nos. 295.93 Ninety Five And Paise
LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Ninety Three Only
Certificates)(NOTE: Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)
(A) Tube Light with integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20,
conventional 4 feet Cat-III
Rupees One Hundred
(A) Tube Light with integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-lll
12 Nos 165.64 Sixty Five And Paise
Sixty Four Only
Replacing old and U/s By new Supplying and erecting LED indoor
fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder
coated and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name 160V to 270V,Power
Rupees Five Hundred
Factor more than 0.9, THD < 15 %,CCT 3000 K to 6500K, Luminaire
efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting required
202 Nos. 589.84 Eighty Nine And Paise
Eighty Four Only
LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (A) Square/
Circular shaped Surface/Recessed Mount Downlight with provision for
spring loaded mounting clips complete.IP20 (iii) 16-20 watts, Surge-2
Replacing old and U/s by Providing and, fixing heavy duty flange type
brass cable gland with rubber ring for PVC insulated armoured cable Rupees Forty Seven And
complete with out going tails, insulating tape etc for following size of
Paise Forty Seven Only
cables.(d) 2 to 4 core 16 Sq. mm
Replacing old and U/s by Solder less crimping type Copper lugs
conforming to IS suitable for cable of following size evenly crimped
Rupees Twelve And
234 with high pressure tool & connected to switchgear terminals with 54 Nos
Paise Twelve Only
brass/cadmium plated nut bolts in an approved manner. (C) 16 Sq.mm.
Replacing old and u/s By New providing and erecting Miniature circuit
Rupees One Hundred
breaker single pole 6A to 25A suitable to operate on 240 V A.C. system
and having breaking capacity 10 KA to be erected in existing box.
186 Nos 112.11 Twelve And Paise Eleven
confirming to IS 8828/1996 with ISI Mark.
Replacing old and u/s By New Providing & erecting 415 V MCB Four
Rupees Seven Hundred
Pole for Motor & Inductive Load (C Curve) having 10KA breaking
capacity & confirms to IS :8828 in existing box having following
9 Nos 737.3 Thirty Seven And Paise
capacity (c)63 Amp.cat.III
Replacing old and U/s by Providing and erecting Approved make
ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA and suitable for Rupees One Thousand
237 operation on single phase 240 V,50Hz. having characteristic of quick 9 Nos 1969.5 Nine Hundred Sixty Nine
action & tripping with all advance feature & do not incorporate any And Paise Fifty Only
electronic component. for following Max. rating erected as directed
(i) 25Amps. DP Cat. III
Rupees Two Thousand
238 .-----do----.(ii) 40Amps. DP Cat. III 21 Nos 2235.13 Two Hundred Thirty Five
And Paise Thirteen Only
Replacing old and u/s By New Providing and erecting Sheet Steel
powder coated MCB distribution board - flush / surface mounted fitted
with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 Rupees Three Thousand
& 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Eight Hundred Seventy
MCBs.(The DBs should be used of same company of MCB to be used)
Four And Paise Thirty Six
suitable for (B) three phase incoming and single phase horizontal type Only
outgoing Per phase isolation type (PPI) (b) sheet steel double door
Replacing old and U/s By New Providing and erecting Sheet Steel
powder coated MCB distribution board - flush / surface mounted fitted
with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 Rupees One Thousand
& 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of One Hundred Fifty Two
MCBs.(The DBs should be used of same company of MCB to be used)
And Paise Forty One
suitable for (A) single phase incoming and horizontal single phase Only
(b) sheet steel double door (IP-43) (iii)8 way
Providing and erecting required size HOT deep Galvanised iron strip for Rupees Seventy Seven
241 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 35 kg 77.77 And Paise Seventy Seven
using proper clamp. Only
Providing , erecting , fabricating the M.S. structure as per requirement
on site incorporating proper size of M.S. angles,square,round, flats, bars,
Rupees Seventy Seven
channels, sections complete with cutting, welding, grinding & finishing
duly painted with one coat of red oxide with erection on site as per
65 Kg. 77.77 And Paise Seventy Seven
direction of engineer in charge with necessary grouting, cementing,
plastering & finishing complete.
New Supplying and erecting Flexible PVC insulated multi strand multi
core 1.1 kv grade ISI marked copper wires of following size to be Rupees Forty Six And
erected as directed.
Paise Forty Six Only
e) 1.50 Sq.mm 3 core round PVC sheathed
Replacing old and U/s by Supplying & erecting earth pit of minimum
bore dia.150mm size approved make Earthing Electrode consisting Pipe-
in-Pipe Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm with constant ohmic value
surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty Rupees Four Thousand
244 cover.(approved make OEM has to submit test certificate) & having 3 Nos. 4591.46 Five Hundred Ninety One
back filling compound of (B) Inner chemical (CCM Compound)- And Paise Forty Six Only
Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-
< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain moisture
for long time Necessary test report must be submitted.(a) For Electrical
Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling
compound - 1 Nos Bag of 15 Kg.
New Supplying & erecting approved make Automatic liquid level
Rupees Two Thousand
controller 6A. with sensor testing as per instruction of Engineer in
Three Hundred Fifty Five
245 charge on site complete with wiring connection with existing wires , 3 Nos.
And Paise Thirty Two
with copper conductor from pump to upper and lower tank.
carry out RCC Core cutting- up to 100 mm dia./300mm thick Rupees One Thousand
Wall/beam/slab with providing PVC pipe of 3 mm thick inside and Five Hundred Forty Nine
necessary finishing on both ends of wall .
And Paise Thirty Four
Replacing old and U/s By New Supplying & erecting Galvanized M.S
pipe post “B” class 88.9 mm O.D 4 mtr. Long duly painted with two Rupees Three Thousand
coats of aluminium paint complete with metallic base plate of 300 mm x Two Hundred Twenty
300 mm x 4mm thick for using as a compound light pole with approx.
Five And Paise Ninety
weight 32 Kg. Replacing- 42 Nos. Four Only
Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom
including excavation for the pole of size 45 x 45 x 100 cm. Deep in
below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) Rupees Eight Hundred
high upper ground level with necessary curing and finishing in approved
Nine And Paise One Only
manner. ( for 4 & 6 mtr pole)
Disconnecting old and u/s By New Providing and erecting
XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium conductor for 1.1 Rupees Seventy Nine
249 KV. to be laid on wall with necessary clamps or in existing trench / 450 Mtrs. 79.79 And Paise Seventy Nine
pipe of following size of cables. Only
(A) 2 core 4 Sq. mm
Rupees Ninety Two And
249b (B) 2 core 6 Sq. mm 450 Mtrs.
Paise Ninety Two Only
Drilling the road without breaking the road surface (Asphalt) for laying
Rupees Four Hundred
of cable for feeding power supply by making up to following size of
holes at both ends complete.
40 Mtrs. 492.88 Ninety Two And Paise
Eighty Eight Only
(A) Up to 100 mm bore dia
Making trench in soft soil of suitable width of 90 cm deep for laying
Rupees Fifty Five And
251 cable or locating the fault all over the run and back filling the same and 550 Mtrs.
Paise Fifty Five Only
making the surface as normal ground.
Replacing old and U/s by Providing & laying approved make Double
walled corrugated pipes (DWC) of polyethylene(conforming to IS
II )with necessary connecting accessories of same material at required Rupees Sixty Two And
depth in existing trench for laying of cable. below ground / road
Paise Sixty Two Only
surface for enclosing cable
(A) 50mm outer dia
Rupees Seventy Three
252b (B)63mm outer dia 450 Mtrs. 73.73 And Paise Seventy Three
Providing and erecting Pipe type earthing having 150 cms.long and 2.5 Rupees Three Hundred
253 cms. dia. galvanised iron pipe with coupling and buch buried in 16 Nos. 368.65 Sixty Eight And Paise
specially prepared earth pit complete with necessary 8 SWG earth wire. Sixty Five Only
Rupees One Hundred
254 For using salt and charcoal / coke as required for pipe type earthing. 16 Nos. 171.7 Seventy One And Paise
Replacing old and U/s by Providing and erecting Miniature circuit
Rupees Two Hundred
breaker single pole 0.5A to 2A system and having breaking capacity
KA to be erected in existing box. confirming to IS 8828/1996 with ISI
16 Nos. 270.68 Seventy And Paise Sixty
replacing old and u/s by new Providing and erecting street light pole
bracket comprising main B Class MS pipe of 4.2 cm/require outside dia.
complete with suitable B Class M.S. sleeve tubing of approx.
45cms.length and suitable for 76.5 mm / 80mm. / require size pole top Rupees Four Hundred
256 having sufficient fasteners for fixing the brackets and having spread of 1 15 Nos. 450.46 Fifty And Paise Forty Six
mtr. length with suitable rise as per site condition & suitable welded Only
stiffener reducer and nipple with check nut complete painted with one
coat of Red oxide / PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms. [A] Single Arm bracket 0.5 Mtr
Replacing old and U/s By New Supplying and erecting LED street light /
Flood light fittings with High power White LEDs wattage of 3 Watt and
above assembled on single MCPCB, efficiency more than 130 lm/w and
corrosion free High pressure die cast aluminium housing with smooth
finish powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
Rupees Two Thousand
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>
lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &
15 Nos. 2201.8 Two Hundred One And
Paise Eighty Only
LM-80 certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must
have 440VAC line supply with over-voltage protection. (iii) above 24 to
36 Watts Cat-III
Replacing old and U/s by Supplying and erecting LED street light /
Flood light fittings with High power White LEDs wattage of 3 Watt and
above assembled on single MCPCB, efficiency more than 130 lm/w and
corrosion free High pressure die cast aluminium housing with smooth
finish powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses with company mark/name engraved or Rupees Seven Thousand
embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, Two Hundred Sixty Six
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>
And Paise Ninety Five
lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & Only
LM-80 certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (B) Flood Light (IP-65),
Surge protection -4KV integral and ,Light must have 440VAC line
supply with over-voltage protection. (iv) above 90 to 120 watts Cat-III
Replacing old and u/s By New Supplying & erecting approved make
Digital time switch having lithium cell 6 years operative and operate
battery backup 1 channel day clock with 14 memory programme, Rupees Three Thousand
suitable to operate on 240V + 5%, 16A with, floating contacts Minimum One Hundred Sixty Eight
switching setup time 1 minimum & LCD display. Also comprised
And Paise Thirty Seven
permanent ON/OFF switching. Programming switches & housed in fire Only
proof thermoplastic enclosure & transparent cover erected as required
with necessary connection erected as directed.
Replacing old and u/s by new Supplying & erecting approved make
SMC press moulded composite FRP. loop-in, loop-out approx. 2mm
thick box complete with Bakelite connector strip 5way(3P+N+E),DIN Rupees Eight Hundred
300 rail for mounting mob & hinged doors as per requirement having 27 Nos. 898.9 Ninety Eight And Paise
locking arrangements with mounting clamp with nuts, bolts & washers Ninety Only
suitable for erection on pole with cable clamps& earth bolt of following
size of box. (a) 300mm x 200mm x 100mm [deep]
Replacing old and U/s by Providing & Erecting approved make
following size of TV Co-axial flexible cable comprising inner conductor
Rupees Thirty Nine And
301 of solid bare copper insulated with Foam PE & Secondary conductor 210 Mtrs.
Paise Thirty Nine Only
made of poly - Aluminium film bonded Al. Braids @ suitable coverage
overall sheathed with black PVC insulation. b).RG-6
Replacing old and U/s By New Supplying & erecting IP 55 grade
following size section pillar fabricated from joint less M.S. Sheet with
angle iron legs made from jointless M.S. Angle with cable clamps to be
buried in ground to have appropriate erection to work uniform until
erected with cement concrete foundation and 45 cm high bricks work
finishing with plaster etc. hinged double door internally supported on
both side, with internal and outside looking arrangement with look and Rupees Three Thousand
302 keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded 2 Nos. 3595.6 Five Hundred Ninety Five
and other with nut and bolt for erecting Bakelite sheet. Painting the And Paise Sixty Only
Section Pillar inside and out side with three tank powder coated paint.
section pillar roof should be without joint with water leakage proof &
tested as per IP 55 test & followed by IS 2147 of
(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet
with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS
Rupees One Thousand
New Supplying and erecting HYLAM sheet on existing angle iron Nine Hundred Twenty
frame.for following thickness. (E) 10mm THIKNESS
Seven And Paise Eight
Replacing old and U/s by Supplying and erecting horizontal / vertical
mounting type storage water heater with copper container housed in
M.S./S.S./ABS body insulated with glass wool/puff complete with Rupees Nine Thousand
304 heating elements,adjustable thermostats 300C to 850C, indicating lamp, 1 Nos 9513.19 Five Hundred Thirteen
safety valve, fusible plug, etc.complete erected with coach bolts, nuts. And Paise Nineteen Only
washers & cementation (SOR No.8-16-2)
(B)15 Ltr-.with 2 /3K.W. heating element Premium Category
Rupees Eleven Thousand
Four Hundred Fifty Five
305b (C)25 Ltr. with 2 KW. heating element Premium Category 3 Nos
And Paise Forty Two
Providing & erecting water cooler having storage capacity 150 Ltr. &
cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The
Rupees Fifty Five
outlet temp. of the water should drop by 15˚C within a hour, The water
Thousand Eight Hundred
306 cooler should be comprising of hermetically sealed compressor, fan 2 Nos
Ninety Three And Paise
motor, condensing unit, water tank surrounded by evaporating, coil,
thermostats, relay etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless Steel.
Supplying & erecting 5 stage single reverse osmosis water purification
system with M.S. powder coated frame, prefilter housing with 'O' ring
Rupees Twenty Nine
presediment filter GAC filter, carbon filter suitable buster DC pump
Thousand One Hundred
307 capacity 80 psi, mention with 40 psi inline type post carbon filter auto 2 Nos
Eighty Seven And Paise
low & high pressure switches with following size of storage tank & LPH
Ninety Nine Only
capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster
Replacing old and U/s by Supplying and erecting Fully Automatic hydro
pneumatic booster system with cast iron housing Enclosure class IP44
minimum , with built in PTO motor protection and stainless steel
impeller pump, pump model GRUNDFOS CMB 5-46 series or Rupees Forty Six
equivalent with 24 Liter hydro pneumatic pressurized tank capacity : 5 Thousand One Hundred
m3/hr,Rated head :30 mtr, motor rating : 1.2 H.P. includes pressure
Thirty Five And Paise
switches, Non Return Valve, Pressure Gauge, 5 way Brass connector, Seventy Nine Only
with necessary Plumbing work which includes all required size of pipes,
Joints valves, Bypass valve, labor all accessories required for installation
of pressure pump ( Foundation work and base stand cost included)
Providing new Bollards
(b) LED Bollard fittings of minimum height 600 mm & dia.100mm
having polycarbonate clear/milky diffuser mounted on 3mm thick Rupees Three Thousand
309 aluminium finished powder coated pipe with base plate 160x160mm 44 Nos 3161.3 One Hundred Sixty One
with erection by M8x75mm fastner with required RCC And Paise Thirty Only
foundation.Weight- kg IP65 for 15watt ,surge-4kv- cat-III (make and
model should be decided by authority)
Replacing old and U/s by Providing and erecting XLPE (IS:7098)(I)-88
Rupees Two Hundred
ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench / pipe of
20 Mtr 255.53 Fifty Five And Paise Fifty
following size of cables (B) 4 core 35 Sq. mm
Supplying rubber matting of following thickness as per IS:15652/IEC Rupees One Thousand
311 61111 20 sq.mtr 1027.17 Twenty Seven And Paise
(b)4mm Seventeen Only
Providing and erecting Inverter based approved make split air-
conditioning unit consisting of condensing unit with variable speed fan
motor, inverter type hermetically sealed rotary compressor with
Rupees Seventy Two
accessories etc. duly connected separately erected evaporating unit and
Thousand Three Hundred
312 blower motor with its accessories by means of extra supplied proper 5 Nos
Eighty One And Paise
insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco
Sixty Five Only
Friendly green gas charging and 15A plug top & Remote Control & MS
Stand) with necessary core cutting.(2)For ISEER Range
(KWH/KWH)(4.0 to 4.49)(C) for 1.7 to 2 ton capacity-Premium Cat.
Supplying and erecting insulated pair of soft copper tubing open or Rupees Nine Hundred
314 concealed including power and control cable,necessary PVC drain pipes 25 Rmt. 965.56 Sixty Five And Paise
for Split AC machine up to 4 TR capacity Fifty Six Only
Replacing old and unservicable TV by Providing Erecting and testing of
SONY Bravia /SAMSUNG/LG or equivalent led TV 108 cm (43 inch)
4K and above Display: 4K Ultra HD LED, 3840 x 2160 pixels, 60 Hz Rupees Forty Thousand
315 Refresh Rate Connectivity: 3 HDMI | 2 USB | Wi-Fi-Operating System: 4 Nos. 40026.88 Twenty Six And Paise
WebOSlinus base, /Tizen operating system/android operating system - Eighty Eight Only
google ) AppleTV Plus, Netflix, Prime Video, Disney+Hotstar-/ google
Sound: 20 W Speaker, with Remote, 4K Upscaling
Replacing old and u/s refrigerator by Supplying approved make domstic
Rupees Thirty Nine
refrigerator of 301 ltr. to 400 ltr. Frost Free Double Door 3 Star and
Thousand Eight Hundred
316 above Convertible Refrigerator with Digital Inverter, Convertible 5-in-1 2 Nos.
Ninety Eight And Paise
and Display Storage capaity single phase with EER rating LG,Samsung,
Whirlpool or its equivalent (Approved by Competent Authority)
Rupees Fifteen Thousand
Replacing old and u/s refrigerator by Supplying approved make
One Hundred Sixteen
317 domestic refrigerator of 165 Ltr to 185 Ltr storage capacity, single phase 2 Nos.
And Paise Sixty Seven
minimum 3 star rating. LG,Samsung, Whirlpool or its equivalent
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable
Rupees One Hundred
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe of following size of
85 Mtrs 140.39 Forty And Paise Thirty
cables(C) 4 core 10 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
Rupees Nine Hundred
multistrand Copper conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe at road crossing or floor
180 Mtrs 987.78 Eighty Seven And Paise
Seventy Eight Only
of following size of cables.(B) 4 core 16 Sq. mm
Providing & erecting open well type horizontal mono block pump set
with stainless steel body having following specification (C) 1 H.P. Rupees Nine Thousand
320 single phase open well motor pump set suitable for 185 LPM discharge 4 Nos 9613.18 Six Hundred Thirteen
@ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control And Paise Eighteen Only
Supplying & erecting approved make LAN cable of following size in Rupees Seventy Six And
existing pipe as per direction[D] CAT - 6 e
Paise Seventy Six Only
Total (Eletric) ..B
Rupees Two Crore ThirtyTwo Lakh FiftyOne Thousand One Hundred FourtyEight Paise Sixteen Only
I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated rates mentioned above
amount of my/your tender works out as under.
*Estimated Amount put to Tender Rs. *Estimated Amount put to Tender Rs.
Deduction …………….. % below………………… Add …….…… % above Rs. ………........……….
An amount of Rs. 620940.06 towards estimated credit value of dismantled materials shall be recovered from the 1st R.A. Bill of
I/We hereby declare that, I/We have carefully studied conditions of contract, Specifications & other than tender documents of this
work and agree to execute that same accordingly.
Rate quoted are including clearance of site (Prior commencement of work and its close) in all respects and hold good for work
under all condition, site, moisture/ weather etc also keeping all the system in working condition
The Contractor shall exhibit a board as per Government Circular No. BDG/ 3277/ 1657/ N Dated 26/1/1997 S (M.GUJ) with
detailed specification and details of work and amount involved at site without any payment as directed by the Engineer-in-charge.
(A) I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding
materials,Labour and other factors pertaininfg to work before submitting tender.
(B) I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender
Document of this work and agree to execute the same accordingly
The NOC of proper functioning of the fire system with water line from the government officer/ municipal conrporation or any other
competant body is required and any charges for the same shall be bear by the contractor
6 The contractor shall be resposible for ensuring that the safety during execution of work and testing of the system
Any kind of damage occurred to the existing building during the erection of the system or during maintenace or testing of the
system has to be redone by the agency on his own cost
8 The Labour Cess will be deducted as per prevailing rules i.e. 1% of the work done.
9 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design
the costof difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in
The price bid shall inciude all taxes, duties, levies, fees, labour cess and her charges as per applicable taxes excluding Goods &
Service tax (GST). (GST will be paid separately).
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which
no extra payment shall be made.
Signature of contractor Deputy Executive Engineer Executive Engineer
Capital Project Sub Division.6 Capital Project Division.2
Gandhinagar Gandhinagar
Credit of Dismantled Material
In figure Total Amount
In figure Total Amount
Item Rs. Ps. according to
Item of work but may be Unit
No. In words estimated
1 Steel 6270.87 kg 23.00 Twenty three rupees only
Three rupees and twenty
2 Bricks 95000.00 Nos 3.20
Two hundred forty five
3 Brick bats at 70% of quantity 133.00 cmt 245.00
One hundred thirty three
4 Kota Stone 37.00 smt 133.60
rupees and sixty paise only
Forty one rupees and
5 Tiles 326.00 smt 41.76
seventy six paise only
Four hundred forty two
6 Door Shutter 24.00 Nos 442.40
rupees and forty paise only
Three hundred twenty
7 EZ-7 Door Frame 9.00 Nos 320.00
Two hundred forty rupees
8 Window Shutter(Glazed) 31.50 Nos 240.80
and eighty paise only
Three hundred seventy
9 Window Frame 31.50 Nos 370.95 rupees and ninety five paise
Two hundred sixty rupees
10 Cup Boards 2.00 Nos 260.06
and six paise only
One hundred two rupees
11 Ventilation 4.00 Nos 102.40
and forty paise only
Sixty one rupees and forty
four paise only
Seventy six rupees and
eighty paise only
Seventy eight rupees and
14 G.I Pipe ( 40 mm ) 9.00 Rmt 78.10
Two hundred thirty nine
15 C.I Pipe ( 75 mm ) 40.00 Rmt 239.57 rupees and fifty seven paise
Two hundred ninety eight
16 C.I Pipe ( 100 mm) 34.40 Rmt 298.19 rupees and nineteen paise
Twenty rupees and twenty
17 AC Rain water pipe 2.50 Rmt 20.25
five paise only
One hundred eighty rupees
and sixty nine paise only
Four hundred twenty seven
19 Wooden Door Frame 15.00 Nos 427.77 rupees and seventy seven
20 Bib tap/ Pillar Cock/Angle Cock 18.00 Nos 60.00 Sixty rupees only
Rupees Nineteen And Paise
21 cost of u/s & old tube fitting 50.00 Nos 19.05
Rupees Thirty Seven And
22 cost of u/s & old downlighter 20.00 Nos 37.96
Paise Ninety Six Only
Rupees One Hundred Fifty
23 cost of u/s & old ceiling fan 18.00 Nos 158.10
Eight And Paise Ten Only
Rupees One Hundred Sixty
24 cost of u/s & old exhaust fan 8.00 Nos 168.70 Eight And Paise Seventy
cost of old & u/s mains alluminium/ Copper wire , pipe, accessories (i.e Rupees Three Thousand
tissino/modular type -switch , socket ,Regulator, bell .as per site situation)etc Only
Rupees Forty Seven And
26 cost of old and u/s 63/125 amp TPN 4.00 Nos 47.45
Paise Forty Five Only
Rupees Two Hundred
27 Cost Of Old and U/S D.B 3 phase 4.00 Nos 219.64 Nineteen And Paise Sixty
Rupees Seventy Four And
28 Cost Of Old and U/S D.B 1 phase 2.00 Nos 74.17
Paise Seventeen Only
29 cost of old and u/s various size of load wires. 2.00 lot 200.00 Rupees Two Hundred Only
Rupees Seven And Paise
30 Cost of Old and u/s SP MCB 70.00 Nos 7.22
Twenty Two Only
Rupees One Hundred Forty
31 Cost of Old and u/s RCCB 14.00 Nos 143.85 Three And Paise Eighty Four
Cost of old and u/s various size of Allu. cable pieces and pieces from panel
32 1.00 lot 500.00 Rupees Five Hundred Only
Rupees Five Hundred
33 Cost Of Old and U/s pole 32kg each 5.00 Nos 576.00
Seventy Six Only
34 Cost Of Old and U/s cables 1.00 lot 500.00 Rupees Five Hundred Only
35 Cost Of Old and U/s bracket 1.00 Nos 40.00 Rupees Forty Only
Rupees One Hundred Forty
36 Cost Of Old and U/s street light fitting 10.00 Nos 141.70
One And Paise Seventy Only
37 Cost Of Old and U/s box 5.00 Nos 32.00 Rupees Thirty Two Only
38 Cost Of Old and U/s Timer 2.00 Nos 80.00 Rupees Eighty Only
39 Cost Of Old and U/s Section Puillar 2.00 Nos 300.00 Rupees Three Hundred Only
Rupees Four Hundred Fifty
40 Cost Of Old and U/s Flood light 8.00 Nos 455.00
Rupees Nine Hundred Fifty
41 Cost Of Old and U/s Geyser 6.00 Nos 950.00
Rupees Four Thousand Nine
42 Cost Of Old and U/s AC with Cu piping 3.00 Nos 4968.80 Hundred Sixty Eight And
Paise Eighty Only
Rupees Three Thousand
43 Cost Of Old and U/s watercooler 1.00 Nos 3873.80 Eight Hundred Seventy
Three And Paise Eighty Only
Rupees Five Hundred
44 Cost Of Old and U/s RO 1.00 Nos 577.98 Seventy Seven And Paise
Ninety Eight Only
45 Cost Of Old and U/s Fridge Double door 1.00 Nos 2000.00 Rupees Two Thousand Only
46 Cost Of Old and U/s TV 1.00 Nos 2000.00 Rupees Two Thousand Only
Rupees Seven Hundred Fifty
47 Cost Of Old and U/s Fridge Single door 1.00 Nos 750.00
Rupees Six Lakh Twenty Thousand Nine Hundred Fourty Paise Six Only
Signature of contractor Deputy Executive Engineer Executive Engineer
Capital Project Sub Division.6 Capital Project Division.2
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
3. Sch B.pdf
7.cement Consumption.pdf
6.Steel Consumption.pdf
5.testing sch.pdf
4.Specification.pdf
2. SBD.pdf
1. File-1 ANNEXURE.pdf
8. Eligibility.pdf
File-7 Condition and G.R. (2)_2.pdf
File-7 Condition and G.R. (2)_3.pdf
File-7 Condition and G.R. (2)_1.pdf
Download all tender documents and submit your bid