GENERAL-BSP-Peral distributary-BSPConstruction of screw driven mechanical shutters for the Peral distributary-General Mechanical Work

Amount

Supply,Fabrication and erection of M S and S S embedded parts for shutters

OD30826/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD30827/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD30828/2023-2024:Supply of MS round bar including cost of conveyance charges

OD30829/2023-2024:Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery, incidental and handling charges etc complete but excluding cost of material already supplied

OD30830/2023-2024:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, welding, shearing, grinding etc, lead and lift, conveyance, incidental, handling charges etc.

Supply of materials, fabrication,painting and erection of MS shutter

OD30820/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD30821/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD30822/2023-2024:Supply of MS round bar including cost of conveyance charges

OD30824/2023-2024:Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery,all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD30825/2023-2024:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supply and fixing of flat type rubber seal at bottom side, angular type at vertical sides of shutter

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply of materials, fabrication, painting and erection of hoisting bridge units for shutter

OD30831/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD30832/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD30833/2023-2024:Supply of M.S Bolt

OD30834/2023-2024:Supply of MS chequered plates including cost of conveyance charges

OD30835/2023-2024:Fabrication and supply of Hoisting Girder in structural steel confirming to IS2062Gr as per approved specifications and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD30836/2023-2024:Providing of worm and pinnion having a lifting speed of around 5.00cm/min for hand operation including cost of all materails, labour, hire charges and conveyance

OD30838/2023-2024:Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material,labour,hire charges and conveyance

OD30840/2023-2024:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Chipping and concreting of groove for embedded parts

OD30841/2023-2024:Chipping of cement concrete for embedded parts (groove size 300mm x 200mm and up to a length of 3m )manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Bidder Name

JOBIN JOSEPH