24/EDCB/2024-25

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-Baheri Approx. distance upto 75 Km. Including safe loading and unloading.

ST Pole 11 Mtr

11 KV XLPE Cable 3x120 Sq mm

11 KV Cable Box for 11 KV XLPE Cable 3x120 Sq mm

11 KV Outgoing Panel (VCB)

Other Line material

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Hanging & Hoisting Charges With Laying of 11 KV XLPE 3x120 sq mm cable & suitable catenery wire in Double circuit complete in all respect

Under ground laying of 11 KV XLPE Cable 3x120 Sqmm cable in Double circuit on river sand to From VCB to Double pole complete in all respect. Minimum depth should be 0.75 Mtr and cable should be covered by bricks from three sides.

Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

11 KV Outgoing Panel (VCB)

Providing cutting, fixing and welding of MS Strip from existing, earthing to new O/G 11 KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Pipe Earthing of VCB Panel (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Laying, Stringing & Sagging of ACSR Weasal Conductor Conductor complete in all respect

Fixing of 11 KV Cable Boxes for 3x120 sqmm XLPE Cable complete in all respect

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

Catenery Wire suitable for 11 KV XLPE Cable 3x120 sqmm

F Bracket for fitting top insulator with Nut & Bolt

GI Pipe

Gaurding Angle 65x65x6 mm

Gaurding Angle Clamp

11 KV V Type Cross Arm Clamp

Barbed Wire

E Bracket

PG Clamps

M/S HINA ELECTRICALS (BID ID -4865824)